That is a crazy sleek case if I ever saw one.

❤love watching itx builds!! And I love your builds! I’ve been two of your suggested builds and now I’m building an nr200p max

I love this case. Using one for a build in my bedroom for 4k 60FPS with a 5800x3D and 7900 XT for a while now. Fits perfectly on my tv stand.

Another awesome build video.

Recently finished a a4-h20 build a few months ago. Its so nice and surprisingly easy to work in for how dense it is.

Nice build, small and powerful. I was really surprised you hadn't done a build in the A4-H20 before.

Transferred my build from the H2O to the FormD T1 a few weeks ago, I also used an Atmos and getting cables to fit in the T1 was a struggle. That difference in 1 liter between H2O and T1 is insane and, and build in the H2O was much easier, and didn't need to swap out Atmos fans either like in the T1. The T1 experience and build quality is absolutely fantastic but it was $230 shipped to the US, but the H2O is $60 cheaper, more available and a little easier to build in, especially for a first time.

As always, your PC building insights are incredibly valuable! This video on the custom build sparked an idea for my own dual-PC setup - one for gaming and another dedicated to streaming. With that in mind, I'd tweak this build for a super streaming rig by swapping the CPU to a Ryzen 7 8700X3D and opting for an RTX 4060 8GB GPU. Thanks again for all your content! I constantly revisit your videos for inspiration on future builds.

A small, powerful gaming PC combined with a graphics tablet like a Cintiq or a Huion Kamvas Pro would be the dream.

This is my next case! Its perfect.

Awesome video. I love the case

For my A4-H2O, I threw on some fan grills and shoved all the AIO wiring into the top rear cavity with the pump wiring going behind and down to the bottom right. The power extension would go on the motherboard side to clean up the GPU side for maximum clearance.

This is what i needed

Love the Videos! I would love to see you do a build using the Custom_mod Case SLM1 3.9L really curious about how it does thermally with less room for the cooler. Keep up the awesome work, crazy quality content!

I'll say it again, your cable management is god like!

Nice build

the temperature is wild!

This pc is clean AF

There's also the Z690i Meg Unify rocking 3 M.2 slots and Thunderbolt 4 which is a board that i don't see often and currently own.

damn watch this video on my saturday night is awesome. thanks

clean!

Love these SFF builds. Fantastic job!

That 5000T case was super cool. It would be interesting to see Corsair’s mini chase.

Almost my exact build!! I went with a lot of these components thanks to your videos. Looks great, and well done on the cable management. What temps are you getting during gaming? my 4080s can get up to 75C during gaming, which seems a little high.

Hey Devyn, have you built or plan on building in a Mechanic Master case? Personally I’d reccomend either the C26 or C28.

So I made a build in this case using the same AIO, PSU and 4080 FE but went with a Strix 650E-I and 7800X3D. I feel like a few things were omitted in the video. The cable management of the ARGB splitter with the 2 fans and pump block plugged in is a bit of a pain. On the 650E-I all the fan and ARGB headers are on the top just under the rear AIO fan. I ended up routing all fan cables to the back tucking the fan splitter in the gap between the rear AIO fan and case and laying the ARGB splitter cable on top of the 4080 FE. Also you didn't mention but can see in the video you added 120mm grills on the AIO fans. The included cables with the SF750 are mostly fine but be aware the CPU cable is just long enough to reach and using the PCIE cables with the 3 way splitter included with the 4080FE was a non-starter. It's just too crowded and the connector sticks up too far to get the bottom case plate screwed down without an extreme bend in the cable. I ended up having to use a custom right angle cable. Great looking compact build but tight AF in this case. Would have loved to see details of your cable mgmt.

I went with the A4-H2O for my first SFF build and was surprised by how easy it was to work with. I was initially concerned that the gap between my 4090 and the PSU would be too small for sufficient airflow, but the cooler apparently doesn't struggle.

I just wish the cooler master 240 atmos white was available in Australia. Would love to use it if I get that iqunix zx-1 case

Keep trying new cases Really well made videos mate!

That mobo is just what I need for.my storage needs, I hope I can find a reasonable priced 4080s to try and recreate it

Would have liked to see the thermals and performance at the end.

Awesome build, but can we see some benchmarks and especially thermal readings during full load with Blender, Premiere and gaming?

Nice build. I love building SFF systems. Suggestion when demonstrating noise levels at 8:08 it would help to mute the background audio.

pls do a follow up video with temp-loads and stuff, considerung the get this full build, so slick!

You should try the minisforum A990i! It has a laptop i9 processor and 4(!!!) m.2 slots for an itx motherboard (amd has a ryzen 9 too in bd790i but just 2 m.2 slots)

That tiny pc is more powerful than my full sized pc, my full size pc isn’t even weak, its very powerful 💀

This case doen not need rgb stuff. Video production quality is at top level. But I’d like to see temps under load (especially nvme’s temps) and undervolting, if needed.

hi devyn, what are you using to measure fps temps etc? is it afterburner? maybe i need to tweak mine cuz yours looks clean

what is that FPS overlay at 1:05 ? ive been tryna find a simple one like it for so long

I built in this lian li case. I went as overkill as possible and put in the msi ventus 4090 and i9 13900ks, Its loosing about 7% of performance thanks to itx formfactor against a 13900k in a large atx. I am planing to switching the cpu when new ryzen releases but so far the custom watercool loop is cooling it decently.

does it fit a nzxt 240 Kraken Elite?

Hope you make a video on Dan a3 matx.. since it's my perfect size case

GPU temps? It looks very cramped in there.

How can I get those clean looking stats while playing? Is it a skin for Afterburner ?

it's gonna take me some months to afford to build this, but I'm looking forward to it

he finally uploads 👏

why dont you show temperatures when running?

Gigabyte boards seem to having issues with PCI-E Gen 4.0 Riser cables. Did you face any of those issues?

Same Case and same PSU, they fit no problem

If you were going to go Intel instead of AMD for this build, what MB would you use instead? Great review, btw!

what software using for measuring performance in games ?

FYI, AMD can utilize CUDA via ZLUDA in these same applications, about on par with Nvidia native.

I would have liked to see it tested.

Does it fit in a backpack ?

Is Mini PC like that good for gaming in long term use??

Why using RGB fans when they won't be visible at all? This just makes the cable management harder and also causing more clutter (and thus worse airflow).

So if my productivity is about MS office and Pdfs and browser tabs like 30+ and statistical analysis software like Stata and Python. Which cpu is good and future proof for me as I game AAA games sometimes if I have time. 7800x3d or 7950x3d.

Do you ship to vancouver?

Hows this motherboard doing with gen4 riser? ive seen people complaining about it not wortking unless set to gen3 mode manually

can i buy this setup directly from you?

Can you build a liquid cooling mini itx form factor under $500

still beats my ten series build from 2016 - i7 67k @ 4.5GHz - Z170X Gaming - MSI 1070 8GB - Corsair Ram 30000MHz OC to 3200 - M.2 - SSD's - NZXT AIO

How much in total?

Anyone know why creators are chosing the Cooler Master AIO compared to others recently? My AIO is almost at the 5 year mark so I kinda wanna replace it before any leakage.

The 14900k is not on par with the 7950x3d. Especially with the compatibility problems, instead of fixing them they created a weak default profile which doesn't perform anywhere close to the 7950x3d

What. is. that. FPS. overlay. PLEASE, somebody's got to know. I need that minimalism! (at 1:05)

A 7950X3D is definitely overkill even for productivity, I see only a few uses for it so if you're not a heavy video editor or NASA employee just go with the 7800X3D

0:19 Ryzen 7 7950x3d?

Can this fit an SFL PSU?

why does almost everyone who builds such computers not do temperature tests under load? It looks cool, but it's small and I can't say for sure how it will behave if, for example, I render with the processor for 4 hours.

can it run crysis?

Please, a budget gaming PC video..

77K subs 7,7K views :)

wish i could build a small pc but those parts are expensive

Like 1800 USD in this tiny box, sff is good to look at but price 😅

Can anybody recommend a channel/site for non-gaming builds i.e. iGPU? I know it's less sexy and all but..?

Build mine with a 13400f and a rx 7800 XT

I generally like your videos, but every time somebody installs flow-through cooler gpu in a tight space… whyyy, whyyy?

I got my bf a i5 13400f for his birthday. (Intel fanboy) Looking at a 4070ti or a 4080 for his birthday this year. He currently has a 2080ti

You said ryzen 7 at the beginning

Great case. I have it in black, the anodization of the panels looks great, a very deep black color, just black, and not with a gray tint, like powder painting. The only thing I would do is make the top panel more open so that air can escape more freely, since all the hot air from inside the case goes through the heatsink. If you remove the top panel, the CPU temperature drops by at least 4 degrees. Using a Founders Edition video card in this case is not very good for cooling.

No mousepad is crazy

To clarify for others, this rad is 27mm not 37mm (otherwise it wouldn't fit). If you are considering this case, do not buy an extra thick radiator thinking it'll fit. I'd also avoid using T30 fans unless you have a slim radiator. Clearance is a tight 55mm.

I have been using this case for a while now, and I got to say it, it is annoying to build in and very badly designed. Every time I open it upp it just grind my gears how bad it is to build/tinker with. The radiator section is in the way with how it is designed, the psu bracket ie how the psu is placed in the case is also in a bad spot making it a headache when it comes to the psu cables, and if u have an aio it will be even more annoying. They did not really have a plan on what they wanted to do and it is pretty meh at doing everything instead, but it looks nice.

Nearly 200 € for just the mini-ITX case not for me, I don't understand the price for such little boxes.

You started out saying Ryzen 7 for the Ryzen 9 chip. 0:18 easy mistake with amd cpus

BTW the Corsair SF750 has been discontinued

There are a few points I want to mention. 1. Intel can be very efficiant, if you undervolt it and lose some performance in the process. You have to try a few numbers, but it will also fix the instability. Due to the IHS and DIE placement it can be cooled much better then AM5 currently. That difference can easily be 50-70W and you still get the same temps. 2. The 7950X3D still has some issues with assigning cores, which can produce hicups in games for example. And the 7950X3D can run really hot due to the thick IHS, you NEED good cooling for productivity. For gaming it uses the lower clocked 3D-Cores and produces less heat. 3. Socket longevity. AM5 will get Zen5, the next generation AMD CPU, but it is doubtful if it gets another generation after that. Zen6 will have 2x cores and more cores usually need for power. In order to get more power to the socket, you need to change it, thus AM6 for Zen6. Since I don't do productivity on my PC, I'd choose the 7800X3D every time, but not the 7950X3D. A CPU that is undervolted and downclocked by about 10-15% might lose 10% performance, but save 30-50% power!!! Same as GPUs, my 4090 runs below 300W but only loses 5% performance for that. 5% is 2-3 FPS you won't notice, but you notice the quieter PC and less heat in the room.

Give that pc away to me😅

Hardware wise CUDA cores and AMD's SMs are the exact same things, SIMD units that allows for parallel processing. The main difference is the number of SIMD and their width. It's why Nvidia cards don't gain performance when going from FP32 precision to FP16 while AMD doubles it. And also why going from FP32 to FP64, Nvidia sees a 64x decrease in performance while AMD only 32x CUDA is the API that allows programs to interact with the card, it's not the hardware. It's entirely on the developers of applications to choose to use CUDA. There are alternatives as well, OpenCL, SyCL, Vulkan compute. The more mature one is OpenCL but they're all cross platforms, so devs only code once and it works on every vendor AMD is also developping HIP but it's honestly a pretty dumb way of doing things, the API is similar to CUDA to be a drop in replacement and it dynamically calls CUDA functions or AMD equivalents depending on your hardware, I personally went with an AMD GPU cause the only competition they have for support and stability on Linux is honestly Intel. The price to performance and amount of VRAM is also a lot more interesting and I simply refuse to support the shady business practices that Nvidia is known for

Am I the only one who noticed that TAMRON 17-28mm F/2.8 is not on the list?

give me that pc

7900xtx

Ryzen 9 7950x3d not ryzen 7

unfortunally the scene at 8:07 is pointless with background music

Is anyone else annoyed at the fact that both Intel and amd are completely changing their naming schemes? I hate the new names

It's been two Times in 24 hours span that my comment is the first also the actual non bot comment. First it's in kitguru air coolers round up vid ,now this vid.

Going fine with my Intel Core i5-13600K. Perfectly stable. I've had it running at 6GHz on a Noctua NH-U12A but currently in a Lian Li A4-H20 stock speeds and undervolted. Runs at 55C with CinebenchR32 and barely draws maybe 115W of power. Nothing wrong with Intel and suggesting so is spreading false information.

0:10 ryzen 7? U hold a ryzen 9 dude... and a ryzen 7 doesnt have 16 cores..

you have to be transparent and say: i dont recommned intel with ASUS motherboards.