Preparing Kiln Shelves
Рет қаралды 30,242
Күн бұрынLearn more at: www.bullseyeglass.com/bkeo
Additional information: www.bullseyeglass.com/images/s...
Hot glass will adhere to kiln shelves if not prevented by a separator. In this lesson you will learn how to use Bullseye Shelf Primer, an affordable and highly effective separator.
***
The goal of our ongoing educational video series is to explore the full range of kiln-glass methods and cover the same lessons taught in regular Bullseye classes.
This is an open-ended series of online lessons appropriate for everyone from beginners to advanced kilnformers. Lessons are designed by Bullseye instructors to provide foundational skills, inspiration, and new leading-edge approaches to kiln-glass. Downloadable firing schedules, product lists, and helpful links are included.
@abdellatifkata2227 4 жыл бұрын
Thank you very much. I wanted to ask you if the glass only bends with heat or there are some materials
@BullseyeGlass 4 жыл бұрын
@Abdellatif The recipe for bending/forming glass is Heat + Gravity + Time in various ratios for different effects. Different styles of glass will react differently to those factors so testing is always a good idea when developing a new projects. Thanks!
@abdellatifkata2227 4 жыл бұрын
Thank you so much
@nzee770 5 жыл бұрын
Ugh. I guess I'll stick to paper. More expensive but way less hassle!!
@KSCPMark6742 8 жыл бұрын
The narrator says that after the primer has been fired to more than 1300 degrees it's no longer pink, and needs to be reapplied... so, basically this whole involved process has to be performed before each firing ? A normal fusing run is 1350 and upwards. I can't see this being feasible except for one off glass artists.
@serge.gilles.richard-seriago 8 жыл бұрын
Tack glass and firing for 'grisaille' needs only a rang of 1040 to 1250 and 1350 (relatively speaking) so no need to clean and re-coat after each firing
@CuriousEarthMan Жыл бұрын
hi. 6 years later..I'm not an expert on these things, but I consider there may be other mixtures which may withstand higher temps, although Kaolin and Al. hydrate seem to be commonly contained in high temp composites. Maybe check some other brands? Bullseye calls a full fuse temp 1380 F + in this video, if memory serves: kzfaq.info/get/bejne/etRxlaqnzdKZqWQ.html
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 4,5 МЛН