Busting 40 Year Old Nuts with a 1 Inch Impact Wrench | Milwaukee M18 FUEL 2867-20 REVIEW

Рет қаралды 1,796,683

Күн бұрын

What is the Milwaukee M18 FUEL 1" High Torque Impact Wrench actually like on the jobsite?
Subscribe: bit.ly/SubDeboss | Merch: debossgarage.com/merch
Watch next, "Which Gen 3 Milwaukee Impact is BEST For You?" • Which Gen 3 Milwaukee ...
The M18 Powerstate brushless motor delivers up to 1,800 ft-lbs. Nut-Busting Torque, Making it the World's Most Powerful Cordless Impact Wrench on the market.
1" Impact kit.com/debossgarage/dg-toolb...
3/4" Impact kit.com/debossgarage/dg-toolb...
1/2" Impact kit.com/debossgarage/dg-toolb...
#MilwaukeeTools #NothingButHeavyDuty #NPS19
Follow Deboss Garage:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to "DEBOSS GARAGE"
411 Darling Rd, Canfield, ON Canada N0A 1C0
Other links:
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I like: kit.com/debossgarage/dg-toolbox
Show us your build project: debossgarage.com/drivetribe
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About Deboss Garage:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 1 100

@DEBOSSGARAGE 4 жыл бұрын

Find the best prices using our affiliate links: 1" Impact geni.us/m18-oneinch 3/4" Impact geni.us/m18-34inch 1/2" Impact geni.us/m18-halfin *FULL DISCLOSURE:* Milwaukee is sending us tools to use, to make videos with, and to give some away. We are under no obligation to review their products as part of that relationship, there is no contract and this video went live before they saw it or gave us any feedback on it. I have had the 1" impact wrench since July, did not receive monetary compensation, opinions are my own, and everything is scripted myself. We only review tools that are high quality on this channel, and these impact wrenches impressed me. We are primarily an automotive channel demonstrating unique car builds and gas to diesel engine conversions, and think it makes sense to review automotive tools I actually use, as this is a common enough topic I get asked about. We welcome brands that want to help us continue what we love to do and show you how to do it. While we don't know what the future looks like, our goal with this KZfaq venture is to make our time on this platform profitable, and build unique vehicles with the revenue... So building good relationships with quality brands makes sense to us. We believe we can be one of the best automotive channels out there, we believe we can do that successfully while maintaining creative control, and we believe it should be free to watch.

@thelol1759 4 жыл бұрын

DEBOSS GARAGE thanks for putting proper disclosure next to your links! Love seeing ethical use of those!

@T-MANONE 4 жыл бұрын

Did you connect it to the onekey app and remove precision mode ? There was a tsb on the one inch a few days ago about them not having full torque unless you untick precision mode in the app.

@codym7621 4 жыл бұрын

I own the 1 inch impact and I run a service truck and I love the 1 inch I used everyday on truck lug nuts and tractor everyday

@codym7621 4 жыл бұрын

I bought I'm the day in am out it and I got it in millbanks hardware store

@kkscampbell 4 жыл бұрын

May i have the 1 inch impact?

@volvo09 4 жыл бұрын

That's a lotta balls. Hard to imagine cordless tools were pretty much unusable 30 years ago, now they're capable of real work.

@legohead6 4 жыл бұрын

30 years ago? Even 10 years ago their applications were limited.

@Dunki113 4 жыл бұрын

Exactly, I bought myself a battery powered leaf blower and a chainsaw and they both have been amazing The leaf blower we use it for our trucks to clean off the trailer, we have flatbeds and haul grass/sod on them so you would get a lot of rocks and planks from the grass and wooden pallets and the blower cleans it off like if they were nothing The chainsaw have been pretty impressive as well, been able to cut up to 4 inches and it would cut like butter, plus, it's so easy to maintain

@user-xs7rs7eb7t 4 жыл бұрын

especially if you have 2 batteries

@bartprice3439 4 жыл бұрын

Hah! They were very useful, compared to a brace bit or a Yankee screwdriver. It's all relative. I have a pile of old hand tools no one under 40 would buy at a yard sale for a buck, let alone know what they are or how to use them. And unfortunately, 9.6V Makitas will never look cool as antique decorations on restaurant walls.

@legohead6 4 жыл бұрын

@mike toni Everything has its limitations. No comparable air tool would of removed those nuts either. In the real world youd torch those off.

@ElJoeRN 3 жыл бұрын

I need this gun. Theres a picture frame I've been meaning to hang on my drywall.

@ulysesmunoz3940 3 жыл бұрын

Might need something stronger

@raymondcastany7182 3 жыл бұрын

Bwahahhaa sounds like something I'd tell my wife. 🤣🤣😜💪💪🙏

@Mr.BeyWars 3 жыл бұрын

Save your money Sike go the Home Depot! and drop a bag and get tools we don’t need but need

@Forgivefull 2 жыл бұрын

Im stealing

@edwoodard2884 2 жыл бұрын

You got lath in your wall mate?

@havingfun8192 4 жыл бұрын

Rich, I change tires on 50 ton hauls trucks underground. They have 50 wheel nuts torqued to 500 ft/lbs. I use my Milwaukee 3/4 gun with a 12 amp battery it can remove all the nuts, reinstall them and go around the entire wheel twice and tighten to near spec with an extension and have 2 bars on the battery left over. Milwaukee tools are incredible.

@DEBOSSGARAGE 4 жыл бұрын

Thanks for sharing real world experience. Numbers on a box don't mean much to most. Nothing beats real world!

@havingfun8192 4 жыл бұрын

DEBOSS GARAGE thanks for your reply! Love your channel. I live and work in the mining industry in northern Ontario I’ve got real world experience with Milwaukee tools for days. Last week I changed a tire on a CAT AD 30 rock truck the wheel studs are torqued to 740 ft/lbs and there’s lots of them. Armed with my 9 ah battery I did the whole job, tightened down the new tire and checked it with a torque wrench and my 3/4 was able to hit the 740 tightening no problem. I was a skeptic too when it came to advertised torque output numbers and we did real testing, torqued fasteners to the advertised values and the tools do what they say. I also wanted to know what every different power mode does so I knew what applications I could use the tools on. I don’t use anything under 1/2” drive so I don’t need anything smaller than my fuel mid torque 1/2” gun which is a daily tool. I’ve put them up against the competitors tools from Snap-on, Matco, IR, makita and dewalt and there’s no comparison. The only air tool I currently use is a die grinder and and I haven’t found a replacement for my 1” drive air gun yet, gonna try the new Milwaukee shortly. Milwaukee replaced all other pneumatic tools and allowed me to bring the power with me no matter what kind of mess I find myself in.

@havingfun8192 4 жыл бұрын

DEBOSS GARAGE not to mention the huge amount of grief and hours of time they’ve saved me which I consider to be priceless.

@wobblysauce 4 жыл бұрын

@@havingfun8192 Having to run air all over, and the od leaks that would pop up.

@havingfun8192 4 жыл бұрын

wobbly sauce.... in my line of work compressed air isn’t always available, in fact it not available far more often than it is. Over the years I’ve done several jobs by hand which have taken far longer and with huge amounts more effort then it would have with the use of power tools. When this Milwaukee line came out it was a huge stress relief for people like me who work in several different areas of a mine at any given time. I keep a complete 3/4 and 1/2 impact socket sets in my underground truck and a couple different impacts when I leave the shop so matter what I got the tools to do pretty much anything anywhere without even have to think about air hoses etc.

@JunkyardDigs 4 жыл бұрын

The supercharged big block of electric impacts

@WelkerFarms 4 жыл бұрын

Oh the possibilities we could achieve with impacts like those. There are so many times we could have used something like that! thanks for sharing

@liamjerkins7259 3 жыл бұрын

Hey, do I know you...oh yea, I love your videos 👍

@legohead6 4 жыл бұрын

I call my 1/2" one my "Problem Solver". Its all i need in automotive applications. My air impacts have been collecting dust since i bought it just over a year ago. Never looked back

@Zozo806 4 жыл бұрын

yes who wants an 1400 nm stubby impact in the shop where air is always avaible if you could work for the same force output with an 8 to 10 pound tool. This 18V Tools are great for the field but still they are power to size and weight not even close to air tools and i doubt they never will exept there will be once a Batterie with nearly limitless output and no weight

@legohead6 4 жыл бұрын

@@Zozo806 I use my M12 3/8" impact or ratchet 90% of the time. They are lighter then most air tools, and i dont have to trip over hoses or risk hoses scratching paint. The M18 is only used for larger/stubborn bolts, and ive never found myself holding it for any great length of time. Pick it up, spin the bolt off, then set it back down. I was a huge air tool fan boy too before experiencing these tools. I have probably $10,000 worth of air tools literally collecting dust. I recently removed the air tool rack from my bench and stuffed them all in the back room.

@wes11bravo 4 жыл бұрын

@MarwoodAuto - that's good to hear. I was all set to get an air impact until I started learning how badass the new battery powered stuff is. I need to put new shocks/springs on my Jeep and my old 250ft/lb max Craftsman electric impact was doing absolutely nothing to loosen all those rusted fasteners. Hoping the Milwaukee 2865-20 I'm getting will work...

@Freddie2598 2 жыл бұрын

I feel the same way I have a 3/8” and a 1/2” and my air tools have stayed in my cabinet since

@mjmcomputers 4 жыл бұрын

Coming soon the 1.5in Milwaukee Nut Buster Impact wrench. “If it cant loosen them then it will break them.”

@reaganyoder2279 4 жыл бұрын

MJM’s Workshop LOL, I just lost it when I read this😂😂😂

@bradhaines3142 4 жыл бұрын

bro i use 1.5in drive impacts, theyre no joke. if that doesn't work, you kroil it and come back to it later, if that doesn't work, torch and see if that'll do it. if it doesn't work still, bitch is gone, cut the fucker lol

@leen6bt 4 жыл бұрын

Impact sockets would make a big difference.... and also 6 point instead of 12 point

@GetBlitzified 4 жыл бұрын

Why would impact sockets and 6 point make a big difference? Just curious.

@Piecemakerfirearms 4 жыл бұрын

GetBlitzified impact sockets carry way more material for weight thus transferring more kinetic energy to the fastener. 6 point sockets have contact around the entire bolt head whereas the 12 point only make contact on the corner points of the bolt head thus allowing more energy transfer

@samwagner31 4 жыл бұрын

GetBlitzified impact sockets are harder material so they don’t have as much give and 6 point sockets would offer more contact surface

@WalmartBiker 4 жыл бұрын

Sam Wagner aren’t impact sockets softer while chrome sockets are harder and more brittle? Therefore, impact sockets handle impacts better. Seems like if you wanted the most energy transfer a harder socket (chrome socket) would be best.

@samwagner31 4 жыл бұрын

AaronMoore I don’t believe so.. I’m no metallurgist so I could be wrong, but I believe that impact sockets have a greater hardness so that they don’t twist as much as a standard socket, and they’re built thicker so that they don’t shatter. Like I said, I could be wrong. I’m not an expert, just a diesel tech student.

@bigbird2100 4 жыл бұрын

Great video just waiting for the socket to shatter.

@ombligoapestoso5600 4 жыл бұрын

Leave him alone asshole

@seanmorrison5081 4 жыл бұрын

I know a guy that lost an eye, using a regular socket in an impact gun and it shattered. Stay safe, safety squints!

@flisko123 4 жыл бұрын

@@seanmorrison5081 lost an eye?

@DJ_CROFTY 3 жыл бұрын

@@flisko123 they explode very violently one flew 16 feet and hit me in the arm I needed 5 stitches. I’d rate them as dangerous as ricochet bullets.

@flisko123 3 жыл бұрын

@@DJ_CROFTY thats shit, im using wurth set 96509059 and nothing shattered, or only low quality sockets explode?

@StoneyBaloneyUSA 4 жыл бұрын

Everything will be battery powered in the future. The joint i keep in my shirt pocket is now a vape.

@matty86suk 4 жыл бұрын

Vape pen is great when sitting in traffic!

@jamesavery6671 4 жыл бұрын

Funny thing is women were ahead of the curve when it came to battery powered stuff. They been making battery powered dildo's for years now

@mann8333 4 жыл бұрын

@ian cool story bro.

@viperstrike3827 4 жыл бұрын

grinders will go last

@JayJay-de8vq 4 жыл бұрын

That's funny !! And true!!

@brianpeters4486 4 жыл бұрын

Impact socks would make a big difference not only for fit but mass. If you simply make the socket heavier the gun will hit harder. Problem is you can't always fit a fat walled socket in places like on that mag plate bolt you were showing.

@SidewaysInTraffic 4 жыл бұрын

Not necessarily. Chrome is harder and less forgiving. Impacts are softer which makes them handle more "impacts". I would disagree a heavier socket will make the impact stronger.

@jeremyhundley3142 4 жыл бұрын

@@SidewaysInTraffic Brian is on to something! The more mass that is rotating, the stronger the impact. So, if you get a socket with thicker walls than thinner, it will be more efficient. A good example is crankshaft sockets on cars- they are super beefy.

@SidewaysInTraffic 4 жыл бұрын

@@jeremyhundley3142 I watched a few vids and they didn't do a proper test in my opinion. I'm going to hopefully try it this weekend and record it I get the chance.

@jeremyhundley3142 4 жыл бұрын

@@SidewaysInTraffic For sure dude! Let me know if you post anything.

@chocolate_squiggle 4 жыл бұрын

@@jeremyhundley3142 But the socket isn't rotating? It's the hammer inside the impact wrench that rotates. Bigger hammer = bigger impact, but I don't think the socket mass comes into play. However, I imagine tighter tolerances and 6 point rather than 12 would probably make a difference.

@bryanallen5977 4 жыл бұрын

I was very iffy in whether or not to buy this being a diesel mechanic, (because we have 1 inch air at work) but seeing that gun loosen a shear plate bolt. I am way more than impressed definitely gonna get it and show all those guys up :D

@JohnnyDok 4 жыл бұрын

Have a look at the settings in the One Key app for that big guy. As a dealer I received a TSB last week stating from the factory most if not all of these units leave the factory with the peak settings at 70% or LESS. Wind her up and she’s an animal!

@tomduncan1970 4 жыл бұрын

I'd love to see how this could be done, I didn't know that it was even possible. Very cool

@sundown798 4 жыл бұрын

Why would they leave the factory @70%? Seems like they may stress or overheat maxed out.

@cobrasvt347 4 жыл бұрын

Your losing all Your impact ability with that 12 point socket. All it's doing is putting energy into the very edge of the nut and springing back in the socket wall.

@nickgibb4687 4 жыл бұрын

correct, i was thinking the same thing. And with a non-impact socket, tolerances are loose

@dposcuro 4 жыл бұрын

....So, what you're saying is....is that it was even more impressive that it was able to crack that edge nut loose, right?

@DEBOSSGARAGE 4 жыл бұрын

Yeah, you are correct. Like i said though, I can't invest in sockets I will never use again

@nickgibb4687 4 жыл бұрын

thats fine but i have the same unit and if i can afford a $700 unit i can afford common size sockets. obviously im not putting a 7/8 or 1in on it. like a welder im not going to start the gen set to weld some horseshoes together for a hook. the lil hobart works perfect

@dposcuro 4 жыл бұрын

@@nickgibb4687 "FULL DISCLOSURE: Milwaukee is sending us tools to use, to make videos with, and to give some away." I am assuming, that you assumed, that he bought the 1" rattle-cannon?

@findthetrick 4 жыл бұрын

Has strongest electric impact on the market *still uses chrome sockets* lol

@phillyphil1513 4 жыл бұрын

ikr...?

@ranchotools 4 жыл бұрын

A few$ at autozone for rent a impact socket

@krfredri 4 жыл бұрын

@@ranchotools good luck finding 3/4 and 1inch drives at autozone

@ranchotools 4 жыл бұрын

@@krfredri you are right, maybe home depot have some

@stephenanderson1944 4 жыл бұрын

Like he said he’s not going to buy a couple thousand dollars worth of impact sockets just for a video or two

@nicholasbrown7068 4 жыл бұрын

I'm very sure that since that 988B was new that things such as lift cylinders and bucket have been removed for rebuild. Being in Quarry operations for many many years a lot of our older loaders (980H's) with 20,000 hours on them have had that stuff off for rebuild at that point. We have had 988's in the past that get frame up rebuilds after 20,000 hours.

@ranchotools 4 жыл бұрын

Best review, for those impacts on KZfaq so far i watch,,,, thanks nice video

@toddpfister280 3 жыл бұрын

Check the "torque test channel" great stuff there too

@romeroadrian7312 4 жыл бұрын

Pro tip, if it can’t break it, go forward like you’re tightening then reverse it.

@engjds 2 жыл бұрын

Thanks man.

@engjds 2 жыл бұрын

Is the Milwaukee 1/2" impact strong enough for car jobs?

@JackTheTool 2 жыл бұрын

@@engjds most defiantly

@engjds 2 жыл бұрын

@@JackTheToolthanks man, have some suspension work on a bmw, I did wonder.

@traviscarr6536 Жыл бұрын

@@engjds probably just go with the W9000 Series 20V 1" Impact by ingersoll rand.

@aaronshensky9385 4 жыл бұрын

Nice review. Personally im a Milwaukee tool fan. Growing my collection. In past few years i returned 2 abused broken tools to them, they returned new ones to me in several days.

@mikestrucks 4 жыл бұрын

I love my Milwaukee m18 fuel impact ! It makes work so easy...😬👍🏻💪🏻💪🏻

@Dark6star 4 жыл бұрын

Dewalt 20v brushless snub nose impact is my goto

@ranchotools 4 жыл бұрын

Milwaukee be come the way togo 2019 tech

@thomasfoster2511 4 жыл бұрын

1”: haha I got the nut off 3/4”: because I loosened it

@howcroft22 4 жыл бұрын

You should have used the 12.0 batteries. Not only do they last longer but they actually give you more power. If you have the vacuum and you go from any battery to a 12 amp battery you’ll hear the significant increase of suction you can also fill it with the impact wrenches and sawzalls.

@jasonhull2163 4 жыл бұрын

The 1 inch Milwaukee is perfect for earth moving equipment. Bolts get packed with dirt and weathered. I can actually see the 1 inch line being used in bridge building and steel work. Would be ok for tractor trailor wheels too as long as they torqued back down to at least 450 to 500 ft lbs. Thanks for showing this tool off.

@WBOS72 4 жыл бұрын

Awesome vid Rich. Love the new intro.

@astevenson11 4 жыл бұрын

Great video on the impacts. If those bolts are coming loose that often they could clean the bolt head and area around it and Mark with a paint marker. Then the operator could wipe the debris off at the end of there shift and see if it had loosened.

@CrotchetRocket 3 жыл бұрын

Dude I’m on an impact wrench kick now, can’t watch enough of these things work!

@mitchellvasicek364 4 жыл бұрын

Would be an awesome addition to a truck shop. Good for yoke nuts for diffs, headbolts for engines, suspension u bolts and threaded spring hanger pins.

@matty86suk 4 жыл бұрын

I love my mid torque and 3/8 stubby Milwaukee impact wrenches and 3/8 ratchet.

@Sodium_Hypobromite 4 жыл бұрын

I have the 1/2 and stubby 3/8 and my favorite between the two is definitely the stubby! 250 ft lbs is more than enough for your average car maintenance needs and the fact that it's compact is incredible

@daved7024 4 жыл бұрын

Milwaukee makes QUALITY and the m18 fuels are beasts. Nice video, thanks. 👍👍👍

@christianwagner23 4 жыл бұрын

Your new intro is great, I don’t ever comment but I thought it was worth the time to tell you guys it looks great. Great channel, always enjoyed it keep doing you.

@DEBOSSGARAGE 4 жыл бұрын

Thanks!

@deankruse8751 4 жыл бұрын

After I watched your video from a while back about the half inch gun I bought one too and mine actually can take off track bolts. It worked on an old 336e excavator and a D8T with only 60 hours on it

@mikestrucks 4 жыл бұрын

Awesome! New upload 😬👍🏻

@deezelfairy 4 жыл бұрын

Really wish when buying my cordless kit 4 years ago I'd gone with milwaukee rather then dewalt, would buy this thing in a heartbeat!

@ConTheDon187 3 жыл бұрын

yeah dewalt is meh compared to milwuakee, I've converted a few people after they asked to use mine. Haha

@blackcurrant4782 4 жыл бұрын

Great video man, really help me to decide which one to buy.

@erikaslt 4 жыл бұрын

Our company just bought one of these for tighten down columns when we erect a building. Thing is beast!

@willburr13 4 жыл бұрын

And I called my 1/2" m18 fuel the stud snapper... I can't imagine this

@special_k-hvac 4 жыл бұрын

Hell I snapped a half inch bolt on my lawn mower with my half inch ridgid mid torque impact. These are 3-4 times more torque compared to that

@gregschultz2029 4 жыл бұрын

That Is Impressive,Battery Tools Started Out As Good Screwdrivers !!!

@scinto23 4 жыл бұрын

Crazy how far they've come in such a short period.

@y2kxj 4 жыл бұрын

I tryed the small Milwaukee fan, and it’s soo nice .. I use it all the time at work..it’s worth every cent...

@mitchellvasicek364 4 жыл бұрын

Another good application is for the heavy haul side where the booster pivot pin cover bolts are always a pain to get out since there is always cross tension from the weight of the booster attached, even at level height.

@josepharmstrong9677 4 жыл бұрын

Proper sockets make a world of difference. 12pt. Doesn’t transfer nearly the same force to the fastener as a 6pt.

@kylelaw7210 3 жыл бұрын

It would be cool to see it tested against pneumatic 1" drive impact and a torque multiplier.

@Kystifyable 4 жыл бұрын

Man the Milwaukee stuff looks great, a very fitting partnership for the channel.

@LJ-fe8vb 4 жыл бұрын

Proper pipes make a world of difference! I struggled with wheel nuts on my 1998 sprinter for three days. Penetrating oil, wd-40, heat, breaker bars, adapters, extensions, broke two ratchets with two meter extensions when jumping on them! The nuts would not budge! Then i got a propper impact 6-point pipe and they all came off like butter! (Milwaukee impact tool ofcourse😉😂) I am sure that every single bolt you tried to loosen in this video would have come off with proper pipes. Anyways, good content! Cheers from Norway, where everything is rusted because we use stupid amounts of salt!😂

@tjr7729 4 жыл бұрын

Hey Rich , try a yoke nut on a Eaton Fuller big rig transmission . 2-3/4” nut for a work out . I’d be impressed to see it break it loose !

@pablonator3000able 2 жыл бұрын

I believe 1800ft lbs it can go, it'll be close

@nfarnell1 4 жыл бұрын

bad boy deboss, 12 point chrome is not right!!! you are wasting energy heating and bending that socket.

@Eggsr2bcrushed 4 жыл бұрын

He said he can't be out there buying expensive sockets just to use it once.

@gregorsamsa1364 4 жыл бұрын

@@Eggsr2bcrushed All these subscribers and he can't be bothered to buy a couple impact sockets? Lame

@rizzzzzza4643 4 жыл бұрын

Eggsr2bcrushed How do you work in this industry and not have an impact socket set for a 3/4 or 1 inch. Definitely a waste of time.

@nickdonatoni4741 4 жыл бұрын

I had the same problem I ended up using air, BUT! I use the 1 in cordless for a lot. Some heat helped also

@paulristow9066 4 жыл бұрын

I have a 1/2 inch drive Milwaukee love it has saved me a lot of work.

@jedidiah4004 4 жыл бұрын

I'd like to see some crusty 13/18 speed yoke nuts. Heavy truck guy, I daily my 3/4, need to order a 1 inch now.

@jefferycook9277 4 жыл бұрын

My 1/2 Milwaukee will take off a 2 7/8, and tighten it to well above 500 ft-lb. Still would love to have the 1 inch

@adhdieseltech236 4 жыл бұрын

Test it on steel excavator track bolts. We use hydraulics to loosen them

@ClaytonHartin 4 жыл бұрын

DieselTechRestorations hydraulic impact guns are very powerful

@chippewa1994 4 жыл бұрын

Pneumatic torque wrenches work good too

@markguthrie4178 4 жыл бұрын

Another reason why the smaller gun can break a bolt loose that the bigger gun tightened is because break away torque is always less than um tightening torque. It makes sense if you think about it, when you tighten a bolt down it takes more force because you're essentially wedging the threads in.

@codym7621 4 жыл бұрын

I have the 1inch and I love him and I push my every day to the limits

@RagingOatmeal 4 жыл бұрын

I like everyone talking shit about his chrome sockets for his 3/4" and 1" drive. I doubt you could get a set of impact 3/4" or 1" sockets for less than 1000$ cad.

@vader2774 4 жыл бұрын

I’ll stick with my 1/2” for automotive but cool to see Milwaukee making even better tools for the heavy guys

@Dunki113 4 жыл бұрын

I would get the 1 inch to change tires on my pickup truck and car, not sure about a semi truck though

@StrangaPsychoPachic 4 жыл бұрын

@@Dunki113 my 1/2in has no problem doing tractor trailers and torquing them to about 500 ft lbs (spec). My snapon mg725 struggles, works, but struggles. 1in would be overkill. My old m12 fuel 3/8s does car and pickup wheels just fine.

@Dunki113 4 жыл бұрын

@@StrangaPsychoPachic I'm not too familiar with electric impacts so I'm not entirely sure, I'm glad someone with some experience let me know more or less of what I need

@Dieselmd2008 4 жыл бұрын

Been a tech for a long time went cordless best move ever hard to believe cordless is this good Milwaukee rocks the competition

@ippielb 4 жыл бұрын

I had bought an old Allis and Chalmers m-100 grader that sat in the bush for 20 years, there was a water line on the blade during spring melt off. And I have an igersoll 3/4” impact that was able to get all but two bolts off. Had to get the old grinder wrench out. Always wanted the milwake cordless but couldn’t swallow the price tag.

@El-Chavo- 4 жыл бұрын

It's 2 in the morning, I should be sleeping instead. I'm watching a man loosen bolts on KZfaq 🤦🏽‍♂️

@ToyManFlyer1100 4 жыл бұрын

Didn't wanna go there, did ya! You mean .. Bust nuts !!!! XD

@danbjuliano626 3 жыл бұрын

2:07 for me 😉

@benjaminromshak9904 4 жыл бұрын

People saying “I’ll stick with my pneumatics” obviously have never heard the term “time is money”.

@deezelfairy 4 жыл бұрын

Pneumatics are fine if your in a shop. If your mobile like me and working out of a small van these things have been a total game changer - no more pulling backs with a breaker bar and length of scaffold tube and with the bigger 9ah+ batteries the battery life just isn't an issue anymore.

@jvanlieu1 4 жыл бұрын

A good air gun will out produce any electric gun were there is a lot of fasteners with in one hose length of your hook up and you have adequate air the difference is speed not power. That said I absolutely love my Milwaukee high torque 1/2 and my mid torque 3/8. The cordless impacts are a life save were entanglement is a concern.

@fowletm1992 4 жыл бұрын

1in and 3/4 pneumatic still have the lead for now 1/2 in and 3/8 pneumatic is hardly even in the game these days

@jvanlieu1 4 жыл бұрын

@@fowletm1992 I think it will still be awhile before high volume tire shops go cordless it is just to slow.

@fowletm1992 4 жыл бұрын

@@jvanlieu1 Tyre shops prob not but general mechanics and at home certainly My local tyre shoo is using mostly cordless on cars already just run the nuts up tightish and finish with a torque wrench Much safer not having airlines dragging around everywhere they rekon But they still use phematic on machines trucks and 4x4s They are a huge shop servicing 80% of a 20k population town and 400km radius agricultural and mining zone The other local shop use air everything still but they dont check the torque with a torque wrench very use rattle it up and send it They only have 20% market share due to dodgy business extending eay further than just not torquing wheels When I left heavy diesel engineering 2 years ago every mechanic had cordless tools and a 3/4 phematic impact, the shop provided 1in phematic guns and sockets Mostly Hitachi electric but Milwaukee was coming in big time I'm in aus so USA brands dont have a huge presence over here just yet

@myiddf5911 4 жыл бұрын

Nice video, well done!

@akfarmboy49 4 жыл бұрын

I have the 3/4 milwaukee and I use a 9 ahb good tool I'm eyeing up the 1" drive it's on my list

@deatherageperformance8367 4 жыл бұрын

Try to find a rotary engine that's never been disassembled and try to remove the 54 mm flywheel nut they're torque down to 400 foot pounds but you add 40 years worth of heat cycling it's damn near impossible to get it off unless you have an a blowtorch 8-foot breaker bar and two strong people

@outkast0424 4 жыл бұрын

Some bolts are just not for impacts. Or nuts...

@deatherageperformance8367 4 жыл бұрын

@@outkast0424 ????????

@outkast0424 4 жыл бұрын

@@deatherageperformance8367 like you said Homie!! Impacts dont always work... you often need what you said! Or like a hyro-torque

@deatherageperformance8367 4 жыл бұрын

@@outkast0424 okay that makes more sense

@outkast0424 4 жыл бұрын

@@deatherageperformance8367 yeah... i am fairly nonsensical! 👍

@lanewells5290 4 жыл бұрын

I'm cheap I'll stick with my 3 foot long adjustable

@deezelfairy 4 жыл бұрын

But you'll pay the price big time in your 50/60's if your doing it all day every day... 😂

@lanewells5290 4 жыл бұрын

@@deezelfairy I agree I just work on the big stuff for fun lol

@CascdMorris 4 жыл бұрын

😅😅😅

@jedimasterjoe5386 4 жыл бұрын

Nickname is cripple lane wells

@MrErichotmail 4 жыл бұрын

Truly amazing so much power and so convenient not having to need air compressor , air impact and a set of torch! Do you guys back east use propane/oxygen set? It’s so much easier to have the bbq tank filled up works great and all you need is to change the cutting tip ,cheers

@TexMexJoe 4 жыл бұрын

Been seeing your videos and they are very informative. I saw you forgot to try the one inch on the steel track the other impact wrenches could not budge

@bgd73 4 жыл бұрын

now try a 120v electric outlet chicago electric 1/2 impact gun at harbor fright with an open box sale of $31.99

@jaydunbar7538 4 жыл бұрын

Check out that generator you also need to use them both in the same situations. If your near an outlet your probably near air as well and better off using pneumatic.

@Tony-112 4 жыл бұрын

Ah, I remember using a 12 point socket once, kept hammering on a nut, then the socket split like a banana peel 😂😂

@DdDten 4 жыл бұрын

Damn needed that on our 1988 sanvick alpine roadheader 3/4 always struggled.

@reble_uwu3405 4 жыл бұрын

Very neat follow up

@MustangBranden 4 жыл бұрын

Just watched this vid and Dewalt had an ad to start the vid.

@isbcornbinder 4 жыл бұрын

I have Milwaukee everything. NO problem, ever.

@JustAwesome2020 4 жыл бұрын

Awesome video👌🏼

@TravisInCanada1 4 жыл бұрын

Would be interesting to see some sort of winch system where the drills are turning a bolt maybe welded to a chain holding an engine block (or something)

@nfarnell1 4 жыл бұрын

track bolts on a crawler have killed more guns than anything else, true test !

@SteveRivett 4 жыл бұрын

We used to lay out the two tracks side by side and have a race to put on the new pads.

@blazebox71 4 жыл бұрын

Track bolts on anything are a Mother lol

@pacboxing 4 жыл бұрын

I tried it on track bolts. Check my channel

@Dilanom 4 жыл бұрын

I'd like to see if it could remove diff yoke nuts and if I can tighten it up enough without needing a big 1" air impact

@3511manlyman 4 жыл бұрын

Ive managed to do so with the half inch on trucks

@mesh1248 4 жыл бұрын

I have both the 1/2 high torque dewalt impact and the Milwaukee version on the rare occasion the milwaukee will take a bolt of the dewalt cant but both are awesome tools and I wouldn’t want to live without one as a mechanic

@codered5431 4 жыл бұрын

Deboss your channel is awesome

@flatbrimsickdope2050 4 жыл бұрын

Holy shit, the amount of "expert metalurgist socket engineers" weighing in is amazing! Great content, I remember thinking a 20V DeWalt 1/2 was the bee's knees.

@Deutschehordenelite 4 жыл бұрын

Well what does it say when everyone agrees on something? ;)

@jureno27 4 жыл бұрын

U need a impact socket that chrome socket doesn't have the proper weight for impacting plus hey might shatter

@arturopacheco89 4 жыл бұрын

He mentioned that in the video. I'd also go for a 6 sided socket

@Therealphantomzero 4 жыл бұрын

It's not really about the weight but the material is made of doesn't transfer the energy effectively.

@MrROTD 4 жыл бұрын

Sometimes you can loosen a bolt by tightening it just enough to crack it get it loose when you switch the drive it comes loose.

@1991tommygun 4 жыл бұрын

I hated hauling extension cords and hoses around, very happy with my m18 1/2 and 3/4 guns

@jacobszymczak9323 4 жыл бұрын

Was the loader still in use or effectively retired and just sitting around?

@DEBOSSGARAGE 4 жыл бұрын

Both. Just bought and brought from another yard where it sat idle for a bit

@RoadRunnerMeep 4 жыл бұрын

4:25, have you never considered the new induction heaters rather than oxy?

@thomasjames734 4 жыл бұрын

Inductive heaters have there place but the coils are also expensive and he was saying they just cut them off and replace the bolts

@RoadRunnerMeep 4 жыл бұрын

@@thomasjames734 I wouldn't consider inductive heater coils expensive. You can make your own gun for about $100 and the coils are dirt cheap, it's nothing more than copper tubing. Each to their own though. I agree cutting bolts is usually the fastest way of doing things as the cost of replacing them would be cheap. It may still be a useful tool to own though working on farms as I imagine all the mud and water would cake shit up

@itisdrew1938 3 жыл бұрын

I use my 1 inch milwaukee super gun to spin lug nuts off semi trucks, I found that sometimes you have to help the gun by spinning tbe socket with your hand and it makes a big difference.

@Seveneleven44 4 жыл бұрын

Can we acknowledge that rich one handed this mother in the first shot. Absolute unit.

@matts2ndgen 4 жыл бұрын

The 1" impact is "Nuts" 😏

@Elaba_ 4 жыл бұрын

I would at least look away when using such unsafe sockets or protect my eyes in another way.

@Towtrucknut 4 жыл бұрын

I use the 3/4 one daily I have it in are 35 ton heavy wrecker great for driveshaft bolts

@gungadinn 4 жыл бұрын

I repaired heavy off-road equipment. While a 1 inch impact works 80% of the time, when you get serious about impacts, you purchase the #5 spline impact guns. I've got both a Chicago Pneumatic and a Ingersoll Rand spline gun. The #5 spline guns weigh in at over 25 pounds and use a 3/4" diameter air hose.

@JosephArata 4 жыл бұрын

Those electric impacts should only be trusted for removing stuff, not tightening them. They are biased towards reverse torque not forward torque. That 1" electric impact probably barely puts out 300 ft-lb in forward. More like 700 ft-lbs in reverse, not their bullshit 1800 ft-lbs that an actual pneumatic 1" impact would have in reverse.

@joshbracht3244 4 жыл бұрын

You've obviously never used one. My 1/2 inch fuel tightens to well over 600 ft lbs with ease. Done it multiple times on wheels.

@greengolftee87 4 жыл бұрын

No. Pneumatic tools were biased in a certain direction due to the air motor inside. Electric motors don't care what direction they're going.

@havingfun8192 4 жыл бұрын

Batojiri1 i didn’t believe the power numbers either so I did real world testing. I physically torqued bolts to values they advertise and given a good fitting socket with no extension and rust free they’ll do exactly what they claim they will do. I change several tires underground in fact I changed a tire on a CAT AD 30 rock truck last week and wheel torque is 740 ft/lbs my M18 fuel 3/4 gun will turn every nut to 740 (checked via torque wrench). I do however agree that you should not use a battery impact for tightening unless you check torque by hand afterwards.

@havingfun8192 4 жыл бұрын

I’ve also used my 3/4 fuel to remove bolts a 1” pneumatic gun couldn’t do

@nickgibb4687 4 жыл бұрын

just like when they changed horsepower rating on small engines to foot lbs. it was all deceptive to the end user. ex. 400horse but 20 foot lbs...who wouldnt want to snowblow with 400 horses but can only shoot out 3ft....lol

@bahopik 4 жыл бұрын

It doesn't feel as powerful as Milwaukee advertises it, it had hard time loosening nuts on a dry van, after taking off and reinstalling four wheels, it was already cutting out due to over heating even though it had time to cool off in the shade while tires were getting dismounted and swapped out. I'm betting Milwaukee stretched the truth a little, 1" air guns are not dead yet even though I thought otherwise buying this tool

@mcmc8496 4 жыл бұрын

I've had lots of success with my 3/4" impact with old crusty nuts if after the initial reverse hits to go to forward position (tighten) and give it a couple seconds of impact and a lot of times will release some of the crud in the threads and then reverse it works a lot of times when merely reversing won't get it...

@mitchlesinski7803 4 жыл бұрын

my 1/2in with the slip ring & m18 works like a charm

@shortchange26 4 жыл бұрын

Chrome sockets. I predict anvil replacement in the near future. Shame on you.

@shortchange26 4 жыл бұрын

Also, rusty nuts are rarely the issue. It's the through bolts seized in the bushings that are the real trouble makers.

@ayitsyaboi 4 жыл бұрын

@@shortchange26 I don't even try with bolts seized in bushing sleeves. Cut or torch them out and replace the bushings. Fuck that nonsense.

@johnsailor6081 4 жыл бұрын

I still prefer air tools, but that’s just me 🤷‍♂️

@markburnsworth3591 4 жыл бұрын

Good video, impressive gun. Just a thought, use impact sockets on the impact gun and you will get more removal power, and your gun's anvil will last a lot longer.

@ziggybammurphy191 4 жыл бұрын

We use 3/4’s in the bucket trucks (electric line trade)....thing is absolutly fantastic...took the hydraulic hoses and gun and put them in the side-till.....its got more than enough power and the battery just lasts and lasts...i cant even imagine the power of this beast...

@stefanczechorskidds5536 4 жыл бұрын

Wow! Great Vid. *Milwaukee, WI.*

@danielsunnqvist19 Жыл бұрын

With the 1" i have noticed that if i just tighten the bolt first before trying to loosen it, it have worked in almost all situations. The biggest bolts have been tightened to 1200Nm and i used better sockets than chinesium :-P