Cabinetry Basics Part 2 - Screws or Nails? [video 436]

Рет қаралды 362,358

3 жыл бұрын

I get a lot of questions about cabinet and carcass construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, and here in Part 2 I'm going through the most basic methods of joining the sides to the top & base - but should that be screws, or nails?
Part 1 of this series is here - • Cabinetry Basics Part ...
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
*Support 10 Minute Workshop as a KZfaq Member* bit.ly/10minuteMember
*Support 10 Minute Workshop on Patreon* - / 10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - bit.ly/10minuteShop
Amazon store - bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - bit.ly/10minute-links
Full list of ‘Stuff I use’ at bit.ly/stuff_I_use
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - www.amazon.co.uk/shop/petermi...
++++++++
Mentioned in this video:-
Peanut 2 connector system - shop.intelligentfixings.com?ref=10minuteworkshop
Buttonfix - amzn.to/2JIXa35 (US: bit.ly/buttonfix_US)
Benchdogs Rail Dogs - bit.ly/raildogs
Trend MFT router jig - amzn.to/34wSp3b
Benchdogs rail square - bit.ly/bench-dogs
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Bessey Duo Klamp - amzn.to/2tsSWQs (US:amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool Granat abrasive - amzn.to/2A3c1vW (US: amzn.to/2gPAAUz)
Festool RTS 400 - amzn.to/2x6zGZW (US: amzn.to/2i84yXn)
Spax screws - amzn.to/2oYWydc (US: amzn.to/2oOjkDT)
Festool ETS 150/5 - amzn.to/2sapsq9 (US: amzn.to/2ssbZgq)
Festool CTL Sys - amzn.to/2sKa2t3 (US: amzn.to/2tCvVdZ)
Festool CTL SYS Bags - amzn.to/2G9eFVd (US: amzn.to/2GduBpo)
Trend Air Stealth Facemask - amzn.to/2zah0P6 (US: amzn.to/2T5ww6X)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
Silicone brush set - amzn.to/2guo6Sm (US: amzn.to/2yEWbZI)
Silicone brush (single) - amzn.to/2l5rNTD (US: amzn.to/2zqFaQl)
Polyvine PolyTen PVA - amzn.to/2svT03N (US: amzn.to/2rmHYL3)

Пікірлер: 601

@wellfiredbarbecue1394 3 жыл бұрын

general tip ... if using a nail gun, stick some painters tape on first. nail through the tape. fill without removing tape. let dry. remove tape. only tiny areas need to be sanded.

@daviddavis1322 3 жыл бұрын

Simple enough to remember, I hope for next time!

@longhairmullet 3 жыл бұрын

Cool, thx.

@RikoRey92 3 жыл бұрын

Thank you master 🙏

@sjfarrell2.03 2 жыл бұрын

What a good idea 👍

@hectorgrande8000 10 ай бұрын

Same for any cuts especially if you have a blade that isn’t for finish cuts. Put painters tape down then draw a line on top of the tape. Cut along the line over the tape when you pull off the tape you will have a cut good enough for any cabinetry projects

@apswirl Күн бұрын

My goodness. I really appreciate the time you take going into such detail about what most novices, like me, would like to know or sometimes take for granted. I’m learning more about cabinetry in these short videos than some series that are hours long. Thank you very much!

@10MinuteWorkshop Күн бұрын

Glad it was helpful! 👍

@michaeljowett6864 Жыл бұрын

Really like this chap’s approach for teaching. Great channel. Is anyone else slightly reassured that stuff falls off his shelves too? And he doesn’t edit it out. I’m glad I’m not the only one.

@enigmaticx326 3 жыл бұрын

This series is gold for those of us new to cabinet making. 👍🏻

@10MinuteWorkshop 3 жыл бұрын

Thanks, glad you think so! 👍

@dustinmoore1825 3 жыл бұрын

Brilliant, only video on youtube that actually shows how to assemble an mdf carcass. Greetings from Texas, USA.

@10MinuteWorkshop 3 жыл бұрын

Thank you! And very best wishes from London! 👍👍

@tonypowell7529 Ай бұрын

Very much enjoy your videos, well detailed and explained.

@Nayde 2 жыл бұрын

Thanks mate! Lesson was straightforward, love how you would show the whole duration and not jumping from one scene to the other. This video is relatable

@astro143_ 3 жыл бұрын

Pocketholes are designed for hardwood and make it such that you don't screw directly into the end grain, you go from a face grain to a face grain. I do agree they're messy and are easiest to use in places that will stay hidden, but its worth noting why they are available.

2 жыл бұрын

The problem comes when they are done on plywood/MDF/particle/... They don't give a better join but they leave the "scars".

@Kameron-The-Crafter Жыл бұрын

Personally my teacher had us make rabbets and dados. Then glue and nail them together.

@wdnspoon Жыл бұрын

@@Kameron-The-Crafter Dados are wonderful, but the main reason I used them on my last kitchen reno was because my opa was helping me and insisted they were a better joint. He was right, but with a good glue and screw to clamp it down, I probably could've built it in 1/5th the time. We were using birch ply, which is a good choice for dados vs MDF or OSB where that'd be nonsensical.

@MattGratt 2 жыл бұрын

Finally the kind of videos I've been looking for - quick no-nonsense well-informed advice. Thanks!

@10MinuteWorkshop 2 жыл бұрын

Thanks! 🙌👍

@smirka7 2 жыл бұрын

Loving the explanations, plain and simple for us novices 🔥

@sanjaykandekar9211 Жыл бұрын

Very very useful information for beginners. And I love your style of explaining all things the way you do. Thank you for your efforts.

@RohitKumar-dj9uz Жыл бұрын

Thanks Peter for taking time to make these wood work videos for beginners like myself.

@frankblack1481 3 жыл бұрын

Knocking on the door of 100k. A sublime achievement but thoroughly deserved and, to be honest, should’ve happened aeons ago.

@10MinuteWorkshop 3 жыл бұрын

Thanks Frank - and yes, getting there! 😆👍👍

@Nadia-18 9 ай бұрын

You're a treasure on KZfaq !

@IonutNedelcu Жыл бұрын

as someone who's never done anything like this before, I find your videos very informative and digestable. I need to learn how to build this type of cabinets very soon so I appreciate your tutoring!

@thewayoftheshadows1877 2 жыл бұрын

These videos great. See a lot of people talking about pocket screws but no one breaks it down and shows you alternatives. As someone very new to joinery found this very helpful. Thanks 😊

@marcoras5903 Жыл бұрын

Very helpfull for someone that just wants to build some custom things around the house. Much appreciated!

@laapulsford 3 жыл бұрын

Another great video Peter. SImple, however very informative and super useful. It's the really simple stuff that people frequently get wrong and this stops them from achieving great results. Keep the videos coming Peter, they are excellent...

@10MinuteWorkshop 3 жыл бұрын

Thanks Lester! 👍👍

@cribbsprojects Жыл бұрын

Really helpful all encompassing trip through cabinets. Thanks.

@garethhumphreys3687 3 жыл бұрын

Another informative video Peter, thank you for the great content, your channel is definitely worth the Patreon subscription. Your videos have inspired me to dust off my tools and get back into making again.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍👍

@SimonWad 3 жыл бұрын

I'm totally absorbed by your videos of your techniques and you are inspiring me to delve deeper into woodworking. I've just made my son a cabinet for his computer & have just put together a makeshift table. The more I watch, the more ideas you give me! Thank you.

@10MinuteWorkshop 3 жыл бұрын

Thank you! Really pleased to hear it! 👍👍

@stenlangmann9652 3 жыл бұрын

Really like this series. Subscribed.

@10MinuteWorkshop 3 жыл бұрын

Thanks, and welcome! 👍

@frankblack1481 3 жыл бұрын

Do yourself a big favourite and go back and watch his old ones. Top notch.

@FD-dh2fu 3 жыл бұрын

Get on and Get one made. So straight and to the point. LOVE this!!

@10MinuteWorkshop 3 жыл бұрын

👍

@paulinesegar6379 10 ай бұрын

Thank you so very much. Have been struggling with my RV cabinet replacement. Wonderful and informative video. Simply amazing detailed instructions. Great job. Thanks for sharing.

@10MinuteWorkshop 10 ай бұрын

Thank you.

@gilbertboyer9936 2 жыл бұрын

Practical, down to earth advise. Your presentations are good and honest. Well done.

@10MinuteWorkshop 2 жыл бұрын

Thank you! 👍

@jamesmilton5085 3 жыл бұрын

I am very new to anything DIY and these videos have been very informative. Thank you for doing them and I look forward to the next one

@10MinuteWorkshop 3 жыл бұрын

Thanks James! You’re exactly the kind of viewer I had in mind, so I really appreciate the feedback. 👍👍

@nickgowen7737 6 ай бұрын

Wonderful video, thank you very much. I appreciate you going into the very basic aspects of cabinetry and woodworking.

@10MinuteWorkshop 6 ай бұрын

Thank you! 👍

@kluzz 3 жыл бұрын

Perfect timing with this series, as I am about to start building some cabinetry in my garage. Thanks!

@10MinuteWorkshop 3 жыл бұрын

👍👍

@viveksabharwal9027 2 жыл бұрын

me too 😀

@alainaurelseguin Жыл бұрын

I love your videos. Simple and to the point. I especially like that you are not affraid to share your oppinion on different style of either nailing or using any material (like your pocket hole) comment. I use pocket holes and I agree they leave a nasty mark on the wood. I would like to know how much weight you can put on a small cabinet. It would be great to know since I am always afraid of the putting lots of things in the cabinet just to find out that they will fail. Thanks.

@whomadethatsaltysoup 3 жыл бұрын

Thank you for taking the time to share your knowledge! As ever, a very informative tutorial on a subject many newbie (and not so newbie) makers will be interested. Swamped with an endless choice of excellent tools to make joints, both quickly and easily, it is easy to forget the utility of PVA, nails and screws.

@10MinuteWorkshop 3 жыл бұрын

Thanks! Before this video I’d never used nails to make a carcass before, and have to be honest, I was amazed how well it held up, just with panel pins. 🤔👍👍

@mege0105 3 жыл бұрын

I'm glad I got into your channel. Really useful and very well explained for beginners. You got a new subscriber from Mexico! Cheers!

@10MinuteWorkshop 3 жыл бұрын

Thanks, ans welcome! 👍

@marcuswilliams1694 3 жыл бұрын

Been watching now for a while some great advice and tips has help me so much and given me reassurance when starting a project has even helped me with my PTSD as it has given me focus thank you Peter

@10MinuteWorkshop 3 жыл бұрын

Thanks Marcus! 👍👍

@Rumouruk 3 жыл бұрын

Clear and succinct as always.

@user-sm3xq5ob5d 3 жыл бұрын

Good job! Two ideas come to mind: 1. Using a second set of bench dogs with a spacer to get the corner arrangement steady. Spacer being two wedges with sandpaper glued on. This way they can be easily adjusted to any thickness while checking the corner's angle. Alternatively use a clamp and board as varaible stop. 2. Taping the second horizontal board to the first one in a T-formation. This way you have a plain to put the side board on at exactly 90°. The tape could go around the T-formation all the way like a belt so it does not rely on glueing and is strong.

@scalewarmachines 3 жыл бұрын

Enjoyed that one Peter. Really simple yet hugely useful. Very helpful indeed!

@10MinuteWorkshop 3 жыл бұрын

Thanks Martin! 👍👍

@mick882 3 жыл бұрын

Yet another great series. Thanks Peter

@10MinuteWorkshop 3 жыл бұрын

Cheers Mick! 👍

@outoftheboxmedic1608 8 ай бұрын

Great video!

@SA-xs9bk 2 жыл бұрын

Great vid mate with good explanations

@DaveDoesCarpentry 3 жыл бұрын

It’s so satisfying manually driving a nail in to join cabinetry!

@10MinuteWorkshop 3 жыл бұрын

It is! First time I’ve ever actually nailed a cabinet together was for this video - makes me wonder why I’ve been messing about all these years! 😂👍

@DaveDoesCarpentry 3 жыл бұрын

@@10MinuteWorkshop Got to do what is most satisfying! dont worry about how strong the join is hahah

@london_roubenl 3 жыл бұрын

Really enjoying the content, thanks for your time.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@lesliebauer1248 3 жыл бұрын

I find if you have the nails,screw tips slightly protruding push the board together. It helps to hold it together while you drive home. great videos 😎👍

@chrismcandrew1041 3 жыл бұрын

... and all with a complete absence of muzak. Love it!

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@johnwatson8192 3 жыл бұрын

Or the flash bang wallop I'm coming at you guys

@frankblack1481 3 жыл бұрын

Yep - nothing makes me hit the ‘stop’ button quicker than guitar shreddding

@frankblack1481 3 жыл бұрын

...the only channel that is *enhanced* by its use of music is Scott Brown Carpentry. His use of background/B-Roll/music is exemplary, in my humble opinion.

@davidhull1610 3 жыл бұрын

This is an excellent series of videos, with everything clearly explained and there is information here for woodworkers with every level of experience......you would have made an excellent teacher! On the subject of pocket holes, I quite like them for some jobs, but I am always wary of using them with sheet materials, because the screw is aimed directly at the outer corner of the carcase, and you have to be very careful not to blow out the edge....or perhaps I'm just clumsy! I do like to use them in thicker solid wood and have found you can make the scars almost invisible in pine/whitewood by gluing in a piece of 9mm dowel and cutting it off with a flush cut saw (all my workbenches are built that way). Can't wait for instalment no.3 of this series👍

@10MinuteWorkshop 3 жыл бұрын

Thanks Davis! Yes, I know what you mean re pocket holes and sheet goods, and I haven't used them often, but so far they've worked well - but then so did the nails! 🤷‍♂️👍😂

@viveksabharwal9027 2 жыл бұрын

i will be watching more of your videos.. this is exactly what i need to learn 👍🏻🙏🏻

@MINGLE2008 3 жыл бұрын

A very interesting series. Thank you for sharing.

@10MinuteWorkshop 3 жыл бұрын

Glad you enjoyed it, thanks! 👍

@ogatkinson6274 3 жыл бұрын

Thanks, I always learn something from watching your videos. South Texas

@10MinuteWorkshop 3 жыл бұрын

Thanks, glad to hear it! 👍 Greetings from London!

@stevewalker7822 3 жыл бұрын

As always Peter very informative and helpful

@10MinuteWorkshop 3 жыл бұрын

Thanks Steve! 👍

@johnduffy7502 3 жыл бұрын

Very useful, thanks!

@johannaruona9804 Ай бұрын

Thanks for the info

@fahrgast237 2 жыл бұрын

Great video, Thank you!

@Thaabiet74 9 ай бұрын

Absolute gold! Thank you very much

@danyodice1048 3 жыл бұрын

Great series so far. I hope to use some of the techniques soon.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@essentialhandyman 3 жыл бұрын

Really enjoyed this Peter. Many thanks.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍👍

@TheShutterbug1968 6 ай бұрын

ANOTHER EXCELLENT VIDEO. GOD BLESS.

@conorhulgraine 2 жыл бұрын

your videos are gold!!

@Brian18741 3 жыл бұрын

Great series, thanks Peter. 👍

@10MinuteWorkshop 3 жыл бұрын

Cheers Brian! 👍👍

@VicMacMahon 3 жыл бұрын

Yes please Peter! I would really like to see a piece on 18 Gauge nailers as I'm currently trying to decide between compressor and cordless and there doesn't seem to be much content from UK KZfaqrs.

@michaelplays2449 3 жыл бұрын

Good video, thanks Peter

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@pepster1963 3 жыл бұрын

Thank you so much for insights. I am learning quite a bit. Again. Thank you.

@10MinuteWorkshop 3 жыл бұрын

Pleasure, thanks for taking the time to comment! 🙌👍

@HegartySlings 3 жыл бұрын

Brilliant video Peter , I'm looking forward to the next one.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@user-cm1nm9vu8y 9 ай бұрын

great video I am learning a lot

@johnfitzgerald4274 7 ай бұрын

Thank you.

@thomaskitchin3517 3 жыл бұрын

Happy 100k!!! Finally and well deserved!!! 👌🙌

@10MinuteWorkshop 3 жыл бұрын

Thanks Tom! 👍👍

@deonlubbe6127 2 жыл бұрын

Thank you

@daviddickson7494 3 жыл бұрын

Great work as always

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@andrewknots Жыл бұрын

When I bought my pocket hole jig (Kreg) I also bought the plug cutter which allows you to make plugs of the same material to fill the pocket holes. The result is almost invisible if one takes care to match the grain if using textured board.

@horizontbeskrajneinovacije6440 2 жыл бұрын

Thank you...great videos...

@haileeyarbrough1080 3 ай бұрын

Can't wait to jump to pt. 3!

@wriga007 2 жыл бұрын

Very helpful thanks 😁

@andybarker5552 3 жыл бұрын

Another very helpful video

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@grumpywiseguy5992 3 жыл бұрын

Just a great series Peter!!! I use an 18 gauge Ryobi nailer like the one you use. The only issue is how heavy it is. I also use Grex pneumatic nailers with a small, battery powered air compressor also by Ryobi. Still totally portable, the compressor is quiet, has plenty of power for nailers, and no power cord. The advantage is that an air powered nailer is really light weight for overhead work, such as attaching face frames on high cabinets on wall units. Thanks again, these really are good compilations of your years of work and experience.

@10MinuteWorkshop 3 жыл бұрын

Thanks! Good to hear you’re liking it so far. I had no idea Ryobi made a battery powered compressor - I’ll have to take a look at that, thanks! And yes, the 16g is a bit of a lump, keep meaning to get an 18g cordless; I have a corded Maestri nailer /stapler but it maxes out at 25mm, so a bit limiting. 🤷‍♂️👍👍

@davidsatler1 3 жыл бұрын

You are incredible, keep up the great work!

@10MinuteWorkshop 3 жыл бұрын

Thank you so much! 👍

@davidgerardgeraghty9890 3 жыл бұрын

Great stuff Peter

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@hlca143pr 3 жыл бұрын

Thank you for your videos, I like your method of explanation. I just got into DIY because of this quarantine and have been watching a lot of videos lately. Sadly MDF as raw material is not sold in Puerto Rico, but I can apply your teachings to PVC plastic panels, we are not building too often with wood because our weather is excellent for all kind a termites. How you join them (screw, nails, pocket holes) seems to be a personal decision, depending on your desired finish and tools available. For me pocket holes are not a bad option since I will add a layer of formica laminate. And for sure I will suggest your videos to my other pals. Regards, Héctor.

@10MinuteWorkshop 3 жыл бұрын

Thank you Hector! Best wishes from London! 👍

@96ruly 3 жыл бұрын

Just the channel I needed, subscription earned

@10MinuteWorkshop 3 жыл бұрын

Thanks, and welcome! There are playlists where common subjects are brought together, if you have something in particular you're interested in. 👍

@shanesmaineshop 3 жыл бұрын

Great tips thanks for sharing.

@10MinuteWorkshop 3 жыл бұрын

Thanks! 👍

@ohrammcleod2352 Жыл бұрын

You are a legend mate! Thanks for this

@FragBenitez 3 жыл бұрын

Thanks a lot for your videos! Greetings from Chile

@10MinuteWorkshop 3 жыл бұрын

Thank you! Best wishes from London! 👍👍

@JohnWilson-de6fd 3 жыл бұрын

A very good video, Peter. A lovely antidote to the ones where people seem to spend a whole years income on tools and only ever seem to make plywood cabinets for their own Californian workshops! I'd slightly disagree with you on the downsides of pocket holes though. I make really nice (and pricey!) furniture. Mostly fitted bedrooms. All of it with pre-finished boards that I assemble on site with no further cosmetic re-finishing. Over 99% of it absolutely peppered with pocket hole screws, and none of them visible (unless you look round the back, underneath or anywhere else where no normal person would think of looking!). Using 15mm, 18mm and 25mm boards they're great for fixing at right angles and joining 2 boards butted up to each other, like joining the 2 pieces of the back in a double wardrobe, so you don't have to struggle with a 1 metre wide board. It just needs a bit of time in the planning. But yes, I 100% agree with the basic principle of the series: if you have a way of making a nice clean square cut in 18mm board, and you've got a few basic tools like a drill, a screwdriver and a hammer, and a bit of time, nothing (really) is beyond you. I look back at some of the things I made when I started with an old corded Black & Decker and a B&Q circular saw and still think they look pretty good. And still get customers coming back for more!

@10MinuteWorkshop 3 жыл бұрын

Thanks John! Oh, I know many people - yourself included - who've built nice businesses making very nice furniture with extensive use of pocket-hole screws! But I still don't like them much, I'm sorry! Nothing against the mechanics of them - they're very strong and very easy to use because you're working from the face, every time, and you're only cutting one side of the joint. Now, for me next series, plywood shop cabinets and a walnut credenza, all made with pocket-hole screws - and maybe a couple of brads, just while the glue sets... 😆👍

@taicronck9559 9 ай бұрын

wow thank you for doing this

@paulmaryon9088 3 жыл бұрын

Hi Peter, another great vid thanks, I love those spax MDF screws, they certainly do exactly what it says on the tin! Stay safe, thanks for posting

@10MinuteWorkshop 3 жыл бұрын

Thanks Paul! and they certainly do! 👍

@wjjpearson 3 жыл бұрын

What actual noticeable difference do you see compared to cheap wood screw?

@paulmaryon9088 3 жыл бұрын

@@wjjpearson They never split the MDF even when used close to the edge,can even be driven without the use of a pilot,and the torx heads rarely cam out, also self countersinking, Try them, think you'll be impressed

@charlesbattle4380 Жыл бұрын

thanks....looking for part 3

@racinghome657 3 жыл бұрын

Nice one Peter, very interesting series.

@10MinuteWorkshop 3 жыл бұрын

Thank you! 👍

@marijnwouters4643 3 жыл бұрын

I like your style Sir! Greetings from the other side of the sea channel.

@10MinuteWorkshop 3 жыл бұрын

Thanks and welcome! 👍

@pedrobeck7136 7 ай бұрын

Thanks

@deanwinch7979 3 жыл бұрын

Very nice work 👍👍

@10MinuteWorkshop 3 жыл бұрын

Thank you so much 😀

@SingleTrack66 3 жыл бұрын

Nail guns. Nail guns. I have a 22g , an 18g , a 16g . All compressed air they’re cheap and super reliable. I use them all when doing assembly work, depending on the project. Toe nail everything it’s really strong and of course plenty of glue.

@ciptrofin 3 жыл бұрын

I don't really think Peter's workshop has enough space for compressed air equipment :)

@facundomartinez188 2 жыл бұрын

2 vids inside your channel..already suscribed..keep it up bud!

@10MinuteWorkshop 2 жыл бұрын

Thanks - and welcome! 👍

@jamesvaughn4894 3 жыл бұрын

Just built a kitchen cabinet, used pocket screws to assemble the face frame. First time I have used them, Very quick, easy and got great results.

@10MinuteWorkshop 3 жыл бұрын

Yep, no matter the damage that they do, or the aesthetics, they allow folks to get stuff built, which is fantastic 👍👍

@johnsmith-fz3qk 3 жыл бұрын

Over 100,000 views and only 5.5k likes, this is criminally under appreciated! Informative content as ever. Agree about the pocket hole screws. I'm new to carpentry so eagerly waiting to see where exactly it is they prevail. I know there's a bit of a "for" and "against" thing around them.