Luxor locking hubs

Рет қаралды 8,644

3 жыл бұрын

These are the locking hubs for Luxor wire wheels. Using these hubs and these knock offs you don’t have to worry about your wire wheels getting loose on you while driving.

Пікірлер: 26

@mykoolprojects7659 2 жыл бұрын

Finally someone did a video on these adapters. Thank you. I was about to order some. Now I will.

@manuelramos7945 9 ай бұрын

hey mykoolprojects7659 did you e er get the trulock adapters and knockoffs??? if you did how are they doing for you

@lonestarlows Жыл бұрын

New subscriber.. I dig the DYI approach. This design is atleast 20yrs old. As mentioned in the comments roadster/zenith came up with this. I had a set of 96 spokes locking adapter with rings on hubs back in 2001. A great design.

@ridewitmetv2216 2 жыл бұрын

Roadster wire wheel design that adapter ring and spinner for Zenith wire wheel when they owned it, but all the screws were stainless security hex bolts. The bolts had a pin in the middle of the hex so you could only use the supplied allen key to get them off. I never used the lock on the adapter because it was just that much more trouble to get the wheel off if you had a flat on the side of the road but its still my favorite design..... great video

@jefedejefes3293 2 ай бұрын

Installed mine, were as tight as we could get them, 100 miles later, loose, and some of the lock bolts were sheared. The bolts were also able to bottom out and would not be in the lock mechanism anymore, printing nylon bushings at the moment to keep bolt where it needs to be.

@user-yh2cw7vw5e Жыл бұрын

I just got some 14/7's with the gold center and chrome lip and they look and ride nice on my brown 77 Cutlass

@manuelramos7945 2 жыл бұрын

Hi just bought some trulock adapters for my car. First time using them. Just have a question the longer screw that goes to the adapter do you have to screw it until it gets tight or just screw it in until it gets flush with the top of the knockoff? Thanks.

@gladememmott3001 8 ай бұрын

Fuckin awesome 😎👍👍👍

@chucke9715 Жыл бұрын

Good job guys, at least there's one smart American out there. Who can figure out how to make Good wire wheels for a Reasonable price?

@johnpasco1443 4 ай бұрын

As someone who has these wheels, the screws they sent with it aren’t long enough to go through to the adapter and those bolts the center start to rust pretty quick, might wanna swap out for stainless steel or something

@williamramirez2122 Жыл бұрын

What is the length of the longer locking screws ?

@LOSKOPROJECTZPODCAST916 3 ай бұрын

We need the length of the longer bolts ? Thanks

@gilbertviadani3962 2 жыл бұрын

hi we’re get screws at longer ones

@bradjunkens7891 2 жыл бұрын

Did the longer screws come with them? I didn't see them in the boxes

@cappafpv 2 жыл бұрын

Mine did come with longer hardware for the locks

@bmxpicker 2 жыл бұрын

Why they don't make these in 4- lug ??

@jorgevela3488 3 ай бұрын

Do they need to be Luxor knockoffs or can regular adapter be used. Just won’t be able to lock

@cappafpv 3 ай бұрын

Yes you can use anyone but only the Luxor and the zenith style will work to lock

@manuelramos7945 9 ай бұрын

I see when you screw the bolts in to the adapter it locks like it gets tight. I have a set and when I put the screw on it goes all the way through the knockoff. any suggestions??

@cappafpv 9 ай бұрын

Possibly the wrong size or length

@YourLocalHandyMatt 9 ай бұрын

I highly doubt that since they came with the wheels from the manufacture, I doubt they would send the wrong size bolts

@LOSKOPROJECTZPODCAST916 3 ай бұрын

Where can I get the longer bolts from ?

@cappafpv 3 ай бұрын

Mine came with it. But they are shitty and rusted like the wheels did. Hit up Lowes and get some stainless ones or get a set and have them chrome plated.

@LOSKOPROJECTZPODCAST916 3 ай бұрын

@@cappafpvok what’s the size of those nuts ? Thank you 🙏