Wire Ferrules - BEST Amp Connection

Wire Ferrules - BEST Amp Connection - WHEN TO CRIMP!?

Рет қаралды 1,690,695

6 жыл бұрын

Wire ferrules are a thin copper tube that is tin plated and they really help to clean up our car audio installs and make them more robust. With a wire ferrule we can prevent wires from fraying, we can easily un-install and re-install the wire multiple times without issue, and the wire ferrule securely attaches to the wire in our amplifier or processor. But when do we crimp ferrules and when can we use the amp terminal to crimp them with the set screw? Let's find out!
New MICRO AMPS from AudioControl!
Learn more here: • Feature Packed Micro A...
▼ Tools and Materials:
➜ Crimper Tool & Ferrules - amzn.to/2Jy9eT4
➜ 0 Gauge Wire Ferrules - amzn.to/2LnhzGq
➜ 4 Gauge Wire Ferrules - amzn.to/2Jy9AJo
As an Amazon Associate I earn from qualifying purchases.
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
- Ported Downfiring Subwoofer Build: bit.ly/CAFdownfire
- Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
- SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
- LOUD Wrangler Build - bit.ly/CAFloudwrangler
- SQ Grand Cherokee Build - bit.ly/CAFgrandcherokee
- Stealth Hidden Bass SQ Build - bit.ly/CAFstealthaudio
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
-SUBSCRIBE-
kzfaq.info_c...
--LET”S CONNECT!-
Website: www.caraudiofabrication.com/
Facebook: / caraudiofabrication
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Switch It Up - KZfaq Audio Library
Licensed under Creative Commons: By Attribution 3.0
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Пікірлер: 584

@CarAudioFabrication 3 жыл бұрын

▼ Tools and Materials: ➜ Crimper Tool & Ferrules - amzn.to/2Jy9eT4 ➜ 0 Gauge Wire Ferrules - amzn.to/2LnhzGq ➜ 4 Gauge Wire Ferrules - amzn.to/2Jy9AJo As an Amazon Associate I earn from qualifying purchases.

@markdipietro7493 11 ай бұрын

Thanks for the sourcing. Very helpful.

@Stormmaniac 6 ай бұрын

I just got a system but would like the best 4 gauge wire I can find, I'm new to this stuff and had the system installed but feel I should use a better cable

@NickBuenoo 4 ай бұрын

Where is the Colored plastic part of the ferrule shown in use ??

@kevin409galv 24 күн бұрын

WOW! I just installed an amp in my boat and then saw this video. I really hated the way the amps set screws damaged the wires. I had a defective amp and ended up removing and reinstalling many times and the wire kept getting damaged. I pulled the amp one more time and installed ferrules on all power and speaker wires. I never knew ferrules existed before this. Such a clean and professional look.. Thank you!!

@gilbertsoto3143 2 жыл бұрын

I'll tell you one great thing about wire Ferrules. They actually saved my amp from getting stolen. They were yanking on the wire and still didn't get it out of the Amp. Took my sub but lucky I was using a temp sub. I'll never go without them.

@CarAudioFabrication 2 жыл бұрын

That's awesome!

@RandoManFPV 2 жыл бұрын

Love it lol

@donaldrattansingh7578 2 жыл бұрын

Morning i am using a jlaudio system which includes a12w1v2 sub, one pair of C2650x coxial speaker ,one pair of C2650 component speakers, one XD700/5v2 amp.i want to find out what should be my frequency settings on my amp for the door speakers? Thks Donald.

@krowwithakay 2 жыл бұрын

@@donaldrattansingh7578 I have almost the same setup except I went with two pairs of the C2 Coaxials

@thebrokebasshead9984 2 жыл бұрын

@@donaldrattansingh7578 Try 80 HZ high pass.

@100AcreWoodDesigns 11 ай бұрын

This video single handedly upped my game. My install looks so clean it's scary! Beautiful connections! Thank you so much. 2 DB55s, 2 USS 8", 6 6.5" DS18 Pros, 4 DS18 Tweeters, 2 3.6" Kenwood, 2 Infiniti 6x9s, 2 JBL 6x9s, 2 8" K9s in a sealed box. Thanks again!

@mitsibeaver 2 ай бұрын

Just ordered my 4 gauge ferrules, gotta do things properly now we know how to. 👍🏼

@jagtech06 6 жыл бұрын

You posted this video right after I ordered a set of ferules for my 5 channel amp, validating my decision. After finishing the install yesterday, I must say, I’m never going back! Ferules for the win!!!

@PANTYEATR1 6 жыл бұрын

this is a real car Audio education. Mark you have come a long way bro 💪

@markust.8368 3 жыл бұрын

Thank you for all your videos! This one helped me a lot to make decent connections to my amps. As you know, we all are not professionals and your videos gives us just the info we need. So, thanks again and keep doing the good job there!!

@noahzempel 3 жыл бұрын

Did this for my current build because of your videos....ssssoooo glad I did. It has made dealing with wire so much better. Thanks for the videos.

@chrisrichards1446 3 жыл бұрын

Well done for spreading the word about ferrules/boot lace crimps! I have been using them for years for electrical / electronic work . The one thing I will say is it didn't look like you had stripped the wire quite enough , the wire needs to reach the end of the ferrule as demonstrated on the first power cable otherwise when you screw down the terminal it only catches the ferrule and not the wire , after a couple of wiggle the end off the ferrule will break off!

@joshcosta423 4 жыл бұрын

Still my favorite wiring video you have out. I REALLY need to get that crimper and Ferrules

@Laborchet 2 жыл бұрын

And here I was looking for a crimp tool that would do 1/0 and 4awg wires… little did I know, I could just “crimp” them in the very terminal of the amp for a clean and round result!! Here we go let’s install!

@WindOfTheWisp_Janine 9 ай бұрын

Thanks for the excellent video! Love ferrules & am surprised that more folks in the US don't know about their uses & how essential they are. Have been using them recently on some projects including my outside AC condenser unit. In other countries, but not in the US, in 120V/220V applications, it is against code to connect stranded wire to screw lug terminals, as it will result in splaying of the strands resulting in a poor connection (wires mashed down & not all strands making a good connection). I installed a SureSwitch contactor to replace my standard contactor in my AC unit. It has screw lug terminals & I used ferrules to make the connections. Even though the connections were round, I still believe that there is better contact than using bare strands. As others have pointed out, there are crimpers that make a hex crimp instead of a square crimp to better fit in round terminals.

@cmart9240 3 жыл бұрын

You are quickly becoming one of my favorite audo installers. You and steve meade are so informational, it's great. I still don't understand the concept of setting gains/EQ and finding distortion/clipping, but I'm just gonna have to sit down with some SMD tools and read the manuals I guess before starting my next build.

@GTILOUD Жыл бұрын

Nah bruh waste of money on that bs oscilloscope is all you need a dmm with oscilloscope

@Eebling1 Жыл бұрын

I have been recently watching a lot of videos on car audio, upgrading the factory sound in my 22' Telluride from the pretty unimpressive system it came with. This video was probably the best one to just make the install look cleaner. I ended up ordering the kit through the link and it is so much nicer having those little metal end caps crimped onto the wires than constantly re twisting the bare copper ends anytime I remove a wire to check something and have to get it back into the LOC or amp.!

@nathanyoung5213 3 жыл бұрын

Love these videos. Setting up two car amps and want a nice clean install. I remembered this video and came back to watch what was used to terminate the wires. Wire Ferrules. Putting a Amizon order in tonight.

@CragonThe 5 жыл бұрын

Great video! Some folks in the comments recommended tinning the wires. DON'T DO THIS! That would be unnecessary and indeed a bad thing. A good crimp connection is gas tight (sometimes referred to as a "cold weld"). There's nothing to gain in using solder. Tinning the cable instead of crimping would also be bad practice. "the reason this is so is that the differing thermal expansion rates of copper and solder cause a problem. The solder in the tinned wire end expands more than the copper (brass) terminal and a big peg in small hole causes the softer metal to yield (it gets softer with increasing heat as well). When the temperature drops later the parts contract again but now the tinned wire end is smaller than it was and causes a bad connection." (Wire termination for screw terminals. (2014, December 29). RepRap)

@gabrielM1111 2 жыл бұрын

Not if you twist the stranded hard and go heavy with the solder. Then file the end down to make a perfect hard cylinder with copper exposed from filing. I'm using number for so there is room for expansion inside the poor and the screw I tighten it every two weeks and it's embedded in the end. My way gives a direct contact between the wire and the brass port. For extra measure I wrap electric tape around the cable ends where they go into the ports

@poipoi300 2 жыл бұрын

Gas tight, you're funny.

@philipiano001 Ай бұрын

Thermal fatigue.

@ItalianStallionLouie 5 жыл бұрын

You always take things to the ultimate level, when I think I’ve done a good job you show me excellent new ways all the time.

@phxedcwo 3 жыл бұрын

Ordered and used a crimper set after watching this video, works great. I think of all the years of not having this, what a waste. Thanks for your videos.

@bradleysmith681 4 жыл бұрын

Thanks for suggesting the ferrules. They offer a professional look and give a low resistance connection. Also, there are ferrules that crimp the barrel, behind the contact that fits under the set screw. This style keeps the contact round, doesn't flatten it out. I don't know, however, if they are made for wire that size. You are definitely a pro!! Thanks!

@bravomike09 5 жыл бұрын

Outstanding work! I've been an electrician for 40 years in many different forms. I'm an FAA A&P mechanic and hold an FCC GROL to service avionics. I've designing and installed home and automotive security systems. I've worked commercial and residential electrical work. Both high and low voltage systems. I've repaired autopilots inflight. Several times. And I'm happy to say I've learned several new techniques here. Really cool.... Thank you!

@jonathanrodriguez4464 4 жыл бұрын

Wow - thanks for this video! I'm about to set up a system this weekend and this is going to make it a hell of a lot easier!

@scottwa 5 жыл бұрын

I discovered these a couple of years ago and used them on my last stereo install. Did it old school and these helped make the connections much more secure and cleaner looking. I enjoy Steve Mead's videos and am surprised I've never seen him use them, with his overkill wiring, you'd think he'd like a good connection at his wiring blocks.

@xxjcxx89xx36 6 жыл бұрын

I actually just did my first install and I used ferrules on all my wires 1/0, 4, 14, 16, and 18 awg. I had all insulated ferrules and I would slide on a heat shrink wrap then the ferrule then crimp the ferrule on the side closest to the insulation with pliers (either needle nose or a fatter grip for the big wires) then slide the heat shrink back up just over the insulation and heat it up for a tight fit. This gave a clean result for me and the wires didn't have any issues going into any of the holes.

@huntergowder861 2 жыл бұрын

I thought I knew a good bit about car audio... but every turn in this video I learned something completely new 🤘🏽👌🏽

@vermili0138 5 жыл бұрын

Mark, I have to say, these ferrules are great! I tried them recently to install an extra battery for a friend and the cables look neat, coupled with a heat shield under the hood they look fantastic! Also, they hold on the strands so well it's hard to pull the strands out once they are crimped.

@naptownbucks Жыл бұрын

Thanks! You save my life with this. Bought a Rockford marine amp and I was racking my brain trying to figure out how to get that 2 guage wire to fit in those little slots on the amp block! Thank you so much for posting the link as well!

@ryanwilson5936 3 жыл бұрын

Subbed so hard it shook my windows! Seriously though, just subbed because you’ve taught me a lot in last 2 days. I really enjoy your delivery. I’m getting ready to do a full install in my 2014 equinox and your dad’s series of videos are really helping me out with what I’m about to dive in to. Thanks my man!

@RussLyman 6 жыл бұрын

That tool is amazing I def need to get one, so clean on the instal and I love how you can disconnect and re connect over and over. Love this videos where I keep discovering new things about car audio

@PedallingwithPaul 5 жыл бұрын

I have not had a chance to really use these yet but I did buy some because of this video and I am 99% sure I am going to be very happy I did

@robertmisciagna185 2 жыл бұрын

I broke down and picked one up, absolutely love it! Very shot learning curve!

@jiml4987 4 жыл бұрын

Newer subscriber, love the speaker terminals. Doing a new install and looks much better, thank you for the video

@benjaminreinhardt259 3 жыл бұрын

Mind blown! I hadn't even considered pin ferrules on speaker wiring. I use them on electronics projects and will start using them on my speaker wiring. Much easier than soldering the ends. Thanks!

@thejeff1974w 6 жыл бұрын

Dude...your a mind reader! I just ordered some of these for my subwoofers. Going to order some for my amps soon!

@BRAZENCHROME 6 жыл бұрын

OMG I just started using these things, they are awesome. I haven't yet tried the crimp tool yet and would love to pick that up. But man I wish these things were around in my time when I started car audio. Love these Farrell's!

@versus023 Жыл бұрын

Dont know why, but seeing your ''wire job'' is soooo satisfaying for me! haha. theyre so clean!

@bradwinter7028 3 ай бұрын

Thanks for this video, I’ve had many cars and wired amps/subs over the years on my own. I have never realized these existed until this video though lol. It’s the simple satisfying things like these I love. I love a clean installation and always hated the frayed wiring. Just ordered some.

@brianbarajas2948 3 жыл бұрын

3:50 thanks man. This was a slight nuance that I didn't understand in your install video. This makes sense after you explain it, i thought it needed crimping.

@yuhboireycoon3727 5 жыл бұрын

I like that you used the word "thus" very nice vocab

@SupraBdub 4 жыл бұрын

Been looking for one of these kits, not doing pro install currently but always prefer proper wire termination and connectors. Good to have in the toolbox. Thanks

@mxrius1739 3 жыл бұрын

Love your video! OFC, Wireferules etc. installed! looks clean, doesn't oxidice and low resistance across my system

@scorpven 4 жыл бұрын

This is a great idea, easy and simple. I have always used solder to tinned the wire ends with my handy butane soldering iron for car installs, just had to be careful not to make them too fat.

@bradleysmith681 4 жыл бұрын

Indeed. Tin the stripped area and insert under the set screw. Ferrules are a little cleaner.

@westcoast510 6 жыл бұрын

Awesome video! I just ordered the same set and got it the other day. Was going to use on a upcoming install and I used a paint marker to color one black and red and it comes out looking great.

@hajikelist Жыл бұрын

you are the man, this channel is gold!

@BigLove101 6 жыл бұрын

Opening up worlds, thanks Mark!

@PeteyG708 5 жыл бұрын

Great video. I need to add these to the wires going to my Pioneer Amp in my truck.

@bringmeyourweak 6 жыл бұрын

Great subject to cover there Mark! Glad to see this episode. Thanks!

@danielmoraes9637 6 жыл бұрын

Thank you my friend I didn't know the ferrules very useful

@4EntertainmentOnly 6 жыл бұрын

OH THATS WHAT I NEEDED. !!!!!!!......that process of shoving wires with no crimp was such a head. i did what you said had to cut it agian cause it was so mess up

@MrBroly10000 6 жыл бұрын

For amp power and any screw only type connections, the ferules do come handy. For the square type I tin the end of the wire and that makes for a strong solid connection that I can insert emove multiple times.

@HifiVega 6 жыл бұрын

Great video! I’ve been hoping you’d do one on this subject.

@wegotchumonroe576 2 жыл бұрын

Great video just what I needed on a rewire. I have a rewiring nightmare

@Lady_Tism Жыл бұрын

I didn't even know these existed. This is awesome. Thank you!

@TimothyArmstrongamblixVR 2 жыл бұрын

Thanks for this video brother! I had no idea these were even a thing. My install is so much cleaner now!

@CarAudioFabrication 2 жыл бұрын

Glad I could help!

@itsbmd6225 6 жыл бұрын

I used "1/0 to 1/0 Input Reducers" in my install for all of my 0 gauge. They're similar, just slide the wire in, tighten down the allen screw and add heatshrink. I should get some ferrules for speaker sire, remote wire and such but I think they're more necessary on larger wires as they are usually harder to fit into amps as most don't have true 0 gauge inputs.

@Es0ter1ca 3 жыл бұрын

Hey mark, I strongly recommend using a light around of copper antiseize on the bigger amplifier ferrules. Sometimes the connections can seize inside the bore after the set screw forces the O.D. Of the ferrule out and the copper will prevent that and promote conductivity.

@kevinfoster2308 2 жыл бұрын

Genius

@Mmartinez4774 5 жыл бұрын

Got mine ordered, thanks for the tip

@Tr3ble4u 4 жыл бұрын

Man this dude right here taught me a lot of things. Thanks man!

@scottnelson3031 3 жыл бұрын

On the bigger gage wire turn the ferrules around and crimp it and cut the plastic off of it and it makes it a cleaner look when it doesn’t fit around the installation.

@richk9033 2 жыл бұрын

I used those ferrules for the same type of Phoenix connectors on A/V controllers. So when I installed a new system in my truck, I used them for the remote wire and monoblock for my sub. Need to find a couple for the 4 Guage power and ground wires.

@randomtube8226 6 жыл бұрын

You can also use removable banna plugs for speaker wire connections depending on the wire and terminal gauge on amplifier. I use banna plugs on my 2ch amplifier to feed my full range speakers.

@shawnmcclure7282 4 жыл бұрын

Great video! Gonna get some added to my amp asap

@lukespowerhouse 3 жыл бұрын

exactly what I was looking for thanks

@freddiehill5562 3 жыл бұрын

Dude I like your channel ! Learning a lot !

@rolandschoenke1840 6 жыл бұрын

Thanks Mark, And Congrats on your wedding, I just ordered the tool and Ferrules, had to get different 4awg Ferrules though, the one on your link dont ship to Canada.

@thetoolwallchannel 3 жыл бұрын

Excellent. Very helpful video. Thanks for sharing.

@reid1boys 2 жыл бұрын

Thank you so much for all of your videos, they are so helpful. I deal with a stereo, then years go by and I dont do anything, so I forget whatever Ive learned. I was trying to figure out how I was going to crimp 4 and 8 gauge wire using the crimping tool Your video helped me figure it out.... you dont use a tool....lol

@ghosttroll 6 жыл бұрын

Another great video man. I will definitely checking these out for a more professional look

@CVObservatory 4 жыл бұрын

Recently bought a wire ferrule kit and crimped all of my wire ends. Much neater look.

@TimRelates 2 жыл бұрын

Brilliant! The answer I didn't know I needed.

@MrMousy602 2 жыл бұрын

I was able to crimp the ferrules by crimping on the very end of the ferrule allowing me to still get a tight secure fit and also allow me to plug it into my amp.

@genereynolds6946 4 жыл бұрын

excellent stuff. great knowledge and advice.

@bradquinn4161 5 жыл бұрын

The crimpers are also made to make a hex shape rather than a square. The work better on the round "sockets'" (or holes) instead of using the lug to crimp the ferrules.

@ClimptonDiddlehopper 6 жыл бұрын

I've always soldered my ends to keep from fraying and a nice looking shrink wrap makes a clean install. I have done it that way since I started audio installs back in the late 80's early 90's. I joke about the amount of lead I have inhaled over the years. Back in the beginning it wasn't common to get cable like is used here until I started using welding cable. Now it's easy to get but we used to get monster cable that was no where near as flexible. I'd run welding cable in the unseen and then the nice looking on the amp/fuse fascia panel.

@cboyamg 6 жыл бұрын

Billy Beane the main issue with that method is soldered wire is hard as a rock and it doesn't smash properly. Your not going to get the most contact area that way. Does it make a big difference? Any difference? I don't have the patients to test such things.

@chrispohl7185 6 жыл бұрын

Billy Beane I use to tin all wire but I've seen solder break on thicker gauge wire... so I only tin speaker wire and Primary wires now

@oldNavyJZ 6 жыл бұрын

I would put it in the terminal, crimp it, disconnect, solder, then put in permanently. Takes a little more time, but adds insurance and may improve conductivity.

@emofreako 6 жыл бұрын

I tin the ends as well. Basically free way to prevent the ends from fraying. Never had an issue with it.

@dtorb6657 6 жыл бұрын

Ask an electrical panel builder what they use. Those dudes have to deal with code that is far better designed for superior connections and they use FERRULES. Not back woods soldering of the wire tip. That's an old school old man way. Get with the times.

@mokshahereicome 4 жыл бұрын

the strands that poke out of the connections are called "widow makers"

@nickchimienti8111 3 жыл бұрын

@fleaz4984 2 жыл бұрын

@@nickchimienti8111 m

@A6Legit 3 жыл бұрын

Wire ferrules are a god damn miracle. Same with quick connectors. Saves so many headaches.

@michael6692 4 жыл бұрын

thank you ..thank you ..thank you.. thank you ..ive been going out of my mind not knowing what i have been doing wrong

@kelmed4954 3 жыл бұрын

This guy is a teacher.

@uogotto3732 3 жыл бұрын

I got that look on my face

@ProperMethodz 4 жыл бұрын

Those are called "Phoenix" style connectors :) They're often used in Pro Audio and high voltage amplifiers.

@DR0CK 4 жыл бұрын

Shit. Was going to say exactly that lol

@hannahranga 3 жыл бұрын

Very common in any kind of industrial power supply. They're real nice especially as you don't need any special tools but you still have a connector instead of lots of individual terminals

@NemoPropaganda 3 жыл бұрын

Or euroblock but same thing.

@narmale 2 жыл бұрын

europe has been using them for years, they are great in PLC's and MCC's

@Mukeshmiktecrep 5 жыл бұрын

Neat connection looks beautiful.

@andyalmeida8356 6 жыл бұрын

Tell audio control to start manufacturing the Esp2 again!! One of the best high stage devices I have ever owned... still have mine in my truck today!

@sreekumarUSA 2 жыл бұрын

072621/1304h PST 🇺🇸 Thank you for demonstrating the crimping tool, Ferrules and its salient features. Additionally your instruction, where, NOT to use crimping tool. More so, was your introduction to, two new (new for me) systems viz: ACM-1.300 and LC2. I found those 2 units more intriguing. Will research additionally. I have placed order for the Crimping tool set. My DIY hobby entails the usage of this tool for PV environment etc. Thanks again and stay safe. 73s…

@xandianjos3905 4 жыл бұрын

sensational ... but I always stuck right on the wire I see that the transmission of electrical energy is more efficient ...never dropped any installation !!!!!but this plier is sensational congratulations on the work

@martinramirezmi5457 2 жыл бұрын

I've never seen these before, pretty cool.

@Miffokorv 4 жыл бұрын

this changed my wireing game :D gonna go out shopping and make it on all my cables. thank you for this ! :D

@user-di3dm6ef7z 5 жыл бұрын

전선에 튜브와 터미널 찍는 거네요 터미널공구 찍기가 힘든데 영상 올려주어서 감사합니다

@Sniperssx 5 жыл бұрын

wow that help a lot and protect from any short

@abdullaabdulla187 5 жыл бұрын

Great job many thanks for the great video 👍👍👍👍👍👍🌹

@deft1abc1 4 жыл бұрын

Very helpful. Must drop a thanks.

@CallMeCribby 3 жыл бұрын

Very helpful! Thanks for this video!

@CarAudioFabrication 3 жыл бұрын

Happy to help!

@MarkBeezBlogs 4 жыл бұрын

Very cool could have made my life a lot easier 20 years ago when i was a sales rep for Kenwood Military Sales!

@bigcountry55 4 жыл бұрын

i actually use copper tubing for this purpose, been doing it for years but glad to see someone finally put the idea to use

@bricebowlin8834 Жыл бұрын

I actually like your idea more. The idea of using tin plated copper just doesn't make sense to me when I'm spending so much money on a 100% pure copper wiring

@felipevazquez5339 8 ай бұрын

Yeah copper tubing is the way to go. Solid copper and not just flimsy tin.

@suprola7961 2 жыл бұрын

Hey Mark, there’s a round crimping tool out now. Well, it’s more of a 6 sided thing, but it’s not square.

@tcampbell807 6 жыл бұрын

I love your videos Thanks bro! Awesome! Likes & subscribed

@destinationeuphoriaselfdev2089 Жыл бұрын

Didnt know about these thanks for the great vid

@tcvaldez 5 жыл бұрын

Great explanation and demonstration! Good info on practical applications

@ArcadeDude44 5 жыл бұрын

Awesome as always Mark, thank you! I just ordered some 4 gauge, as well as the tool/set of smaller sizes!👍. The timing couldn't have been better for me to see this video, as I am finally getting into the rebuild of my previous championship Cobra.