@@AmipazlimazJak thank you 😊

So far no issues. Its about correct maintenance of this laser to make sure it lasts. I was using mainly the diode lasers but I have to say the capabilities of P2 are vast. However I think the extra cool features are locked behind the pricey accessories. Overall all for me so far it's easy to use and work with, the software it's really good. That's going to be my main workhorse for getting my business going.

Thanks, you too!

Yes its expensive I have to say but it's more dedicated for a small business rather than a DIYer (unless you are very rich 🤣) And the quality and extra features make it more understandable where it comes to the price. However I can imagine some heavy discounts on this product next year.

Thank you for watching 👍

Glad you liked it!

You engrave the face of the material. So thickness doesn't matter however it needs to fit in the machine. Although you can get a riser bed for it to engrave thicker materials.

Hi, I have a Windows 11 Home and have no issues at all. Could be software related, are you using the xTool software for it? Maybe it would need a reinstall? Or maybe the the USB cable connecting your computer and machine is the issue? My connection on the laptop is bit wobbly and if i move the laptop as the machine is working I loose connection.

Thank you for your answer. I use xtool software. I uninstalled and reinstalled it several times and I tested with an Ethernet cable, it's always the same for burning. I do not know what to do. Maybe I'm using gaming?

​@@dronedjiair2setlaserco2 have you emailed xTool? Maybe they will be able to help

Have you cleaned and aligned the mirrors?

@@CasualDIY not sure why my other comment was removed checked all the mirrors and the lens they're all good (my machine has 1h of operating time) and I ran through the alignment procedure twice.

@@tatehanawalt25 not seen any other comments from you🤔 Well in that case I would get in touch with xTool support, there could be a fault with your machine

@@CasualDIY I think it was because I included a link to the community-support thread with pictures. In any case, I just got word from xtool that they are thankfully replacing my machine 🙂

@@tatehanawalt25 Oh yes thats why it was removed. Good that they are replacing your machine. It costs too much for it not to work correctly

Odpisałem na FB

What do you mean by biggest? Thickest or size wise?

The biggest size wise, like is it 600mm x 300mm or smaller? Sorry it’s really hard to find someone that has this info and has actually done it

@@cymilson9231 the maximum working size is 600x300. If you get the conveyor attachment then it's 300x no limit in theory

You know you can increase the speed and power right? It was a test to establish correct settings. It's my first CO2 Laser and most of my experience is based on diode lasers.

The comment was not written with any intended criticism. The jump from diode to CO2 is massive and there is so much more to discover and learn. Almost everyone relies on the parameters that can supposedly be found by using a cutting or engraving matrix. What seems like a fantastic way to understand your new machine is sadly flawed in so many ways.P lease watch these two videos that will demonstrate clearly why you should be sceptical of matrix parameters. kzfaq.info/get/bejne/hMdlkpmg0Lvde5s.html and kzfaq.info/get/bejne/f9SeqLtox9XddXU.html The Xtool CO2 laser is a lovely well designed machine but ALL laser machines rely on the SAME two elements for their cutting and engraving performance.......... a laser beam and a lens. Everything else is just a "pretty dress" Sincere best wishes for your new CO2 laser journey