CBR400 P1 I've finally started

Рет қаралды 26,881

2 ай бұрын

This is the start of me going over the CBR400 NC29 I bought in October 2022.
Today I am removing the front end to get ready to check it over and replace what is needed.
Biker Stuff merchandise - rdbl.co/3oqGmPF
Twitter - / girlybikerstuff
Instagram - / girly.biker.stuff

Пікірлер: 68

@robertdean3507 2 ай бұрын

Hi Dana, great video as always, this just goes to show that no matter how long you have worked on bikes that you can learn something new. The brake calipers are always getting in the way and I've never hung them like you did, great stuff, no more frustrating calipers battering my fingers, thank. Take care both you and Gary.

@armandplaisancejr8937 2 ай бұрын

Dana thank u for another awesome video. I truly love watching u in action because u love breaking everything down for us. I can’t wait until you’re putting the Honda back together again.

@blackbirdmark495 2 ай бұрын

Excellent video & nice to see it explained as you go through the jobs. Keep up the good work 👍

@scottthorning3963 2 ай бұрын

You go into your videos well prepared, good stuff!

@tonypitsacota2513 2 ай бұрын

Stripping a fork is always my favorite part! :)

@richardhoneywell7411 2 ай бұрын

Great video Dana really enjoy watching you disassemble this front-end of this bike. Looking forward to your next video stay safe Dana and Gary.

@Freddie19766 2 ай бұрын

Another lovely informative video Dana made all the better with your giggles well done

@iansmith7929 23 күн бұрын

Nice work Dana.

@donaldmiller5411 2 ай бұрын

Love watching your channel ❤❤

@randyhartel1558 2 ай бұрын

Good video. Thanks for sharing. 🥰

@AndrexT 2 ай бұрын

Nice job and methodically executed.

@862brady 2 ай бұрын

A grand video/tutorial Dana. Brava lass. :)

@abnrgr7569 2 ай бұрын

Your knowledge of motorcycles is amazing 👏🏽 😊.

@tomtruesdale6901 2 ай бұрын

Good job on the strip down. A little spray lube will help the fork tubes slide in/out easier.

@arthurthorpe5445 2 ай бұрын

Awesome.

@alexgrant4216 2 ай бұрын

Expertly done 😀👍👏 interesting and enjoyable to watch as always ❤️

@edwardharrington678 Ай бұрын

You are so clever. Well done.

@Nrgpack 2 ай бұрын

Good job Dana and a very interesting video...some things I knew and some things were new 😁. Big thanks!!

@bikerstuff2 2 ай бұрын

I hope you stay for the whole series

@strokerwatson4770 2 ай бұрын

Great video I learned something today about that front end thank you

@bikerstuff2 2 ай бұрын

I'm pleased. There is much more coming with this bike. I hope you return to see more.

@williamalansteele230 2 ай бұрын

Great video as always dana

@marineguyuk 2 ай бұрын

Front end detail, calipers etc, looks good

@johnkelly5487 2 ай бұрын

Great job, Jack, RI, USA

@teecee2146 2 ай бұрын

Love ya! 😀

@jedi-mic 2 ай бұрын

When holding the wrench try a holding it in your supporting hand with the palm of your hand underneath and pushing up and forward so you've got support make it easier especially on shallow head nuts where you could round the nut off

@neccron9956 Ай бұрын

I would recommend in investing in 6 point sockets & box wrenches (I noticed that you were using some 12 point sockets). They will reduce the Witness marks, on bolts/nuts, and will have a better grip when torquing (on or off) bolts.

@bikerstuff2 Ай бұрын

Thank you

@southernrebel 2 ай бұрын

Another Great video!! Thanks God Bless safe ridin rubber down

@The_Arby 2 ай бұрын

Nice one Dana...Hope you have a lovely weekend 🙂

@bikerstuff2 2 ай бұрын

Thank you, I will

@mikefurr5281 2 ай бұрын

must have gotten a bit warm checking those headstock bearings!

@dparsons5950 2 ай бұрын

Another great video the bike will look great when you finish it 👍

@bikerstuff2 2 ай бұрын

Thank you. I hope you stay for the series.

@dparsons5950 2 ай бұрын

@@bikerstuff2 I certainly will great videos and you look gorgeous 😍

@drost582 2 ай бұрын

Glad to see progress on the Honda. It looks like a clean bike. Missing bolts always concerns me, people can do weird things to machines. Doing a complete restore like the Kawasaki? Hoping you do reach million subscribers.

@garylcampbell9964 2 ай бұрын

you are the best.

@no1init253 2 ай бұрын

⭐️🌟⭐️🌟⭐️🌟⭐️🌟⭐️

@cowetaok 2 ай бұрын

Tad of Vinnyslick on those fork tubes might have gotten them off easier. 😁

@user-tf1dp5id5q 2 ай бұрын

Super 😍😍😍❤😊

@rexmccomb7589 2 ай бұрын

Dana that’s a lot of work is there a seal on the bottom that can be replaced even if the bearings do look good

@bikerstuff2 2 ай бұрын

The bearings and seals appear brand new.

@rexmccomb7589 2 ай бұрын

Awesome good deal I enjoy your videos

@99jeepxjguy97 2 ай бұрын

Im first here to comment! Hello again Dana . . . . You rock, girl! Your Idaho friend, K.

@bikerstuff2 2 ай бұрын

Potato boy 😀

@99jeepxjguy97 2 ай бұрын

@@bikerstuff2 😏 😃

@terrylucas9662 2 ай бұрын

Great job dana love what you do

@richardwingate9240 Ай бұрын

I enjoy your content. Where did you learn so much about motorcycles? Hubby teach you?

@bikerstuff2 Ай бұрын

You know how it is, you pick up a bit at a time as you go along

@richardwingate9240 Ай бұрын

@bikerstuff2 well you seem to know alot and are able to do just about anything on a motorcycle. I enjoy watching and learning

@peterastley9155 2 ай бұрын

Somehow,,I don't think it's just the headstock that's going to need luring up,,,see how it goes eh,

@bikerstuff2 2 ай бұрын

What do you think might be wrong with the steering?

@rodduncan1183 2 ай бұрын

Have you ever thought of building up a bike & take it to Bonneville & have a go at a land speed record ????? Kiwi Rod

@bikerstuff2 2 ай бұрын

No I haven't.

@rodduncan1183 2 ай бұрын

@@bikerstuff2 Have I planted a seed LOL

@bikerstuff2 2 ай бұрын

No, it is just too far to travel to the far side of France

@rodduncan1183 2 ай бұрын

Huhhhhh Bonneville is a large salt pan in the good old 🇺🇸 USA

@bikerstuff2 2 ай бұрын

@rodduncan1183 so it's even further away than south east France

@mickyleachlover 2 ай бұрын

Seems a little different over time. Interesting though

@bikerstuff2 2 ай бұрын

Is this something you have done previously?

@rodduncan1183 2 ай бұрын

I know they do land speed records on X WW2 airfields you could dip your toe in the proverbial water at 1 of these events. We kiwis either head over the ditch to Australia or beg or sell body organs & head over to the US