CHEAPEST Way to Make Lures - Do-It Molds Essential Series Molds

Рет қаралды 43,712

Күн бұрын

It doesn't have to cost a fortune to make your own soft plastic lures at home! With the Do-It Molds Essential Series molds you can get started at a fraction of the price.
Do-It Molds Affiliate Link: store.do-itmolds.com/?AffId=5
Molds in Video:
ES XL iCraw 3.5" - 4 cavity
ES XL Ripper 3.5"
ES XL Wave Worm 3.8 in.
Slick Shiner Essential Series - 8 Cavity
Please support the channel by USING and SAVING these discount codes and affiliate links!
6th Sense - 6thsensefishing.com/ - Luna10
Omnia Fishing - omnia.direct/xkem3k
GCI Outdoor - www.gcioutdoor.com/ - MLF15
Waterland - www.waterlandco.com/ - Luna15
VIDEO EQUIPMENT I USE - a.co/iw9kx03
Check out my website: www.mattlunafishing.com
Join my email list here: www.mattlunafishing.com/email...
Follow me on Social Media:
Instagram: mattlunafishing
Facebook: Matt Luna Fishing
TikTok: Matt Luna Fishing
Want to support the channel even more? Make a donation here!
www.paypal.me/mattlunafishing
Some links listed are affiliate links, and your use of the links will earn me a commission off sales. Thank you for your support!

Пікірлер: 67

@Darkman-Fishing Жыл бұрын

I love those molds, you’re the reason I got my first one and wrote an email to DO IT to make sure they knew why. So far I have the Icraw and the wave worm, the slick shiner is next. That’s all due to you.

@MattLunaFishing Жыл бұрын

Dude that’s awesome! Thank you for sending that email. That’s really cool that you did that. The slick shiner is my favorite i think. The wave worm gets bit!

@beavisbrowne3497 Жыл бұрын

Gorgeous baits!!! Love your bait laboratory creations

@MattLunaFishing Жыл бұрын

Thank you!

@erniejackson9809 Жыл бұрын

Appreciate the information. Just bought my first set.

@MattLunaFishing Жыл бұрын

You’re welcome! Hope the video helps! Feel free to reach out with questions! Did you buy the molds before or after this video?

@Derk_1 5 ай бұрын

I’m going to get into making lures soon. I will make sure to use your link as a thank you for this video

@MattLunaFishing 5 ай бұрын

Awesome! Thanks for watching and thank you for using the link! Means a lot! Here’s a link to a video I just put out that may help you as well: kzfaq.info/get/bejne/qcB0hNB8ssXTo4U.htmlsi=MasG_Ddi5lvtuCb0

@JOSHWAAHHHH Жыл бұрын

Love these videos man!

@MattLunaFishing Жыл бұрын

Thank you for watching! Really appreciate it!

@maddgoatee9708 Жыл бұрын

Like them all. Wave worm was my favorite.

@MattLunaFishing Жыл бұрын

Thanks! That purple came through pretty cool

@ANGEL-et2sk Жыл бұрын

Muy buenas amigo, unos cebos magníficos y los moldes estupendos, mi pregunta es si se podrían adquirir moldes de ese tipo y diferentes modelos ya que aquí en España es imposible conseguirlos. Un saludo

@johnathentribble 25 күн бұрын

I love the molds

@MattLunaFishing 25 күн бұрын

They make some good ones for sure!

@eagles20jon Жыл бұрын

Absolutely love the baits bro I was wondering have you used the dual injector to make the craw baits with 2 split colors

@MattLunaFishing Жыл бұрын

Thanks. I’m not sure if i have or not with that mold specifically but it’s set up to do it with ease!

@jjsq22 Жыл бұрын

I have used a dual for them, they come out great. Off white belly, brown top. very natural looking.

@MattLunaFishing Жыл бұрын

That sounds like a really cool combo!

@danielgoen9452 6 ай бұрын

Great set up!!!Quick question, can you use Plastisol as a substitute for the Old Mattel Goop? Meaning pouring the plastisol in a flat mold, and cooking it? Thanks, Ive never worked with the stuff

@MattLunaFishing 6 ай бұрын

Not sure what you’re referring to

@Pro_HHHHHLLLLL 22 күн бұрын

Late, but yes. On their website you can buy the plastisol. But that’s what he is using in this video

@ronmacdougall9612 7 ай бұрын

Good video

@MattLunaFishing 7 ай бұрын

Thanks

@owens40 Жыл бұрын

Any swimbait mold recommendation for striped bass

@MattLunaFishing Жыл бұрын

Pretty much all the DoIt molds swimbait molds will work, if i could suggest one, i’d recommend the quakin shad mold. kzfaq.info/get/bejne/Z5Nxeq5qztKopGg.html

@SeaBassHunter 4 ай бұрын

Hi Mate have you got any of these (5:18) molds for sale (any link) Thanks a lot ❤️🙏🏻🙏🏻🙏🏻

@MattLunaFishing 4 ай бұрын

You can buy these mold here: store.do-itmolds.com/?AffId=5

@ronmacdougall9612 7 ай бұрын

I’m trying to decide which mold would be good for walleye

@MattLunaFishing 7 ай бұрын

Head over to the Do-It molds site and check out all there molds to get the best one for walleye. I’m not too sure which would be best. Here’s a link to their site: store.do-itmolds.com/?AffId=5

@deltaking209 Жыл бұрын

Nicee

@MattLunaFishing Жыл бұрын

Thank you!

@Mort3327 Жыл бұрын

Hey does the Slick Shiner Essential Series - 8 Cavity molds work with 3/8 ounce 4/0 hook jig heads?

@MattLunaFishing Жыл бұрын

You could probably get away with a 4/0 hook. I haven’t tried myself. Typically i use something smaller.

@Mort3327 Жыл бұрын

@@MattLunaFishing thanks so much you've earned a sub

@MattLunaFishing Жыл бұрын

You’re welcome! Thanks for the sub! Appreciate it! Hope you enjoy the channel!

@zgang6018 8 ай бұрын

What is the stuff that you put you glitter in

@MattLunaFishing 8 ай бұрын

It’s called plastisol

@saleen12 Жыл бұрын

Dude, can you do a video on the man cave? I love the look of those shelfs

@MattLunaFishing Жыл бұрын

Yeah i can probably do that!

@saleen12 Жыл бұрын

@@MattLunaFishing Are they the olympias from home depot?

@MattLunaFishing Жыл бұрын

I got them from harbor freight

@MattLunaFishing Жыл бұрын

This looks almost exactly the same as what i have: amzn.to/3SStwYk

@saleen12 Жыл бұрын

@@MattLunaFishing Oh wow. They are on sale for 100 at harbor freight. Nice. Thanks!

@harolddamron7279 5 ай бұрын

Do we get a discount if we use your link

@MattLunaFishing 5 ай бұрын

Not a discount, but it lets them know I sent you to their site and I get credit for the sale.

@dustinlind8355 Жыл бұрын

Cnc molds are crazy good too though

@MattLunaFishing Жыл бұрын

Agreed. I have some of those as well. Some people aren’t wanting to sound cnc money, so these are a great option

@dustinlind8355 Жыл бұрын

@@MattLunaFishing I fully agree…I want to see the new katana craw but they gotta go to I cast and tease us for weeks

@MattLunaFishing Жыл бұрын

I’ve been told It’s gonna be available July 19!

@STB_LEVIATHAN Жыл бұрын

The amount of bubbles are killing me

@MattLunaFishing Жыл бұрын

The ones on top of the plastisol?

@antonioferrusquilla4976 2 ай бұрын

Is it cheaper to make your own?

@MattLunaFishing 2 ай бұрын

It can be. There are start up costs though

@empoweringquotesdaily88 8 ай бұрын

I have a design for a lure to catch tuna in 15 mins. Don't know to start to patent it.

@MattLunaFishing 8 ай бұрын

In order to patent it you’ll need an attorney. Most baits aren’t patented

@ugetuget8864 Ай бұрын

do you sell the mold?

@MattLunaFishing Ай бұрын

No i get it here: store.do-itmolds.com/?AffId=5

@AddictedAngler Жыл бұрын

ok the title is misleading :P , u cant just buy one hehe dope molds , do-it molds has really step up

@MattLunaFishing Жыл бұрын

Haha. Some of the cheapest multi cavity molds out there!

@AddictedAngler Жыл бұрын

@@MattLunaFishing I own most of them and love them

@MattLunaFishing Жыл бұрын

Right on! Have you gotten any of the new ones? Katana craw, Bushi beetle?

@AddictedAngler Жыл бұрын

@@MattLunaFishing I got the craw

@MattLunaFishing Жыл бұрын

Awesome

@Kevinob 3 ай бұрын

Cheapest? I’d have to buy the not-so-cheap mold..

@MattLunaFishing 3 ай бұрын

Compared to what? These are some of the cheapest multi cavity molds on the market.