Making Soft Plastic Swimbaits with the Do-It Molds Slick Shiner Mold

Рет қаралды 29,762

3 жыл бұрын

Making Soft Plastic Swimbaits with the Do-It Molds Slick Shiner Mold
Use this affiliate link for all your Do-It Molds Purchases
Do-It Molds (Tackle Making Website)
store.do-itmolds.com/?AffId=5
Please support the channel by using these discount code and affiliate links!
6th Sense Fishing - www.6thsensefishing.com - Luna10
Omnia Fishing - www.omniafishing.com/?shopafm... - LunaFirst15
GCI Outdoor - www.gcioutdoor.com - MLF15
Waterland Sunglasses - www.waterlandco.com - Luna10
Want to support the channel even more? Make a donation here!
www.paypal.me/mattlunafishing
Products I Use:
All products available here: store.do-itmolds.com/?AffId=5
Do-It Molds Slick Shiner Essential Series
Soft Baits Crystal Clear Plastisol
Dual Injector
Colorants: Chartreuse, Smoke Blue Pearl
Powders - Blue Pearl, Pearl
Glitter - Silver
Camera Equipment I use:
Vlog Camera - Sony A7iii
Vlog Lens - Rokinon 14mm
Chest Mount Camera - GoPro Hero 8 Black
Console Mounted Camera - GoPro Here 7 Black
Check out my website: mattlunafishing.com
Join my email list here: www.mattlunafishing.com/email...
Follow me on Social Media:
Instagram: mattlunafishing
Facebook: Matt Luna Fishing
TikTok: Matt Luna Fishing

Пікірлер: 52

@Badkharma21 2 жыл бұрын

Jay Siemens also makes some kick ass slick shiner baits. very natural looking... well done sir!

@JoseMartinez-su3xi 3 жыл бұрын

Good video Matt! Keep pumping them out! Thanks!

@MattLunaFishing 3 жыл бұрын

Thanks! Glad you liked it. I’ll be putting out more for aure!

@markdavis394 3 жыл бұрын

Wow. They turned out really nice!

@MattLunaFishing 3 жыл бұрын

Thanks! I thought so as well. Pretty unique!

@linusmalmqvist4205 3 жыл бұрын

Those looks great! Always loved a hottail 👍👊

@MattLunaFishing 3 жыл бұрын

Thanks man! Appreciate you watching!

@MuhammadFajri7 9 ай бұрын

So happy

@MattLunaFishing 9 ай бұрын

Awesome

@robperez3433 5 ай бұрын

Man they are great!

@MattLunaFishing 5 ай бұрын

Thank you

@il_karki 3 жыл бұрын

awesome video as always!!! love your videos and good luck from Italy 🇮🇹🔥👍🏻

@MattLunaFishing 3 жыл бұрын

Thanks! Glad you liked it! Thanks for watching!

@bassinmike8478 2 жыл бұрын

I’m trying to do the same with the paddle tail I couldn’t figure it out until I came across your video good information and good tips Great video Matt as always

@MattLunaFishing 2 жыл бұрын

Awesome! Glad the video was helpful! You can always just do white and then dip the tail in whatever color. There’s dips you can buy that you can keep with your tackle.

@Roboworm99 3 жыл бұрын

Looks great. Will look great on the back of chartreuse and white Spinnerbaits

@MattLunaFishing 3 жыл бұрын

For aureN

@michaelboettcher9384 3 ай бұрын

I only lube one whole side of mold with Pam spray oil. I shoot a little on my table then take a tooth brush and lightly brush a thin coat of oil in one side of mold. The char lures stick to unoiled side. Take knife and cut tail and lift out body leaving tail in slot. Next I put top mold back on shoot body color. Works well for me. Lot less problem putting tail section in mold.

@MattLunaFishing 3 ай бұрын

Good way to do it

@bayouburner281 3 жыл бұрын

Bro, that looks similar to a saltwater inshore color:Bone Diamond/Chartreuse tail Looks awesome 👌🏻

@MattLunaFishing 3 жыл бұрын

I think nite I’ll catch for sure!!

@ronmacdougall9612 8 ай бұрын

Look awesome

@MattLunaFishing 8 ай бұрын

Thank you!

@passirocks_7005 4 ай бұрын

Great Video and beautiful colors. How did you manage to get the cold tail connect to the hot body?

@MattLunaFishing 4 ай бұрын

Extra pressure and hotter plastisol

@IraldoZenenDelgado Жыл бұрын

One of my favourite lures unfortunaly here in Cuba is almoust impossible to get tem. congratulations you are one of the best in the bussines Good luck

@MattLunaFishing Жыл бұрын

I’m sorry to hear that. I know getting tackle making supplies outside the US can be difficult

@ricardomartins1498 7 ай бұрын

Espetáculo muito bom 👍

@MattLunaFishing 7 ай бұрын

Thanks

@mileswieczorek7431 5 күн бұрын

i have a question. couldn't you just pour in chartreuse for a particular amount of time into the mold to replace the tail process? and then pour in the other color after?? or would they mix??

@MattLunaFishing 5 күн бұрын

They will mix. The color essentially lines the cavity all the way down.

@daleskiog7499 Жыл бұрын

I'm doing my molds in the garage but I do have four little ones that run around and come in the garage occasionally I do have a fan and I crack the garage and I use regular masks the cheap ones should I be doing anything different or something to stay safer is making these baits safe for my kids to walk in

@MattLunaFishing Жыл бұрын

I try to keep my kids away when I’m doing it if i can. I honestly don’t know all the safety things for it. I’m not the best when it comes to that knowledge

@jacobpicard25 7 ай бұрын

So how well did the body stick to the tail? If you slightly pull the tail does it break off where the colors meet?

@MattLunaFishing 7 ай бұрын

It works fine. You just need to pour the body color a little hotter so the adhere to each other well

@ericbuss8484 10 ай бұрын

I didnt see one on the website, but does Do It Molds have a senko tail mold, or do you have to just make the senkos and cut the tails off if you want to add them to another color body?

@MattLunaFishing 10 ай бұрын

That’s the easiest way to do it. I’ll look as well on the do-it site and if i find one I’ll let you know.

@jimvalim1567 11 ай бұрын

Just curious, can you still use the microwave to cook food after using it for making plastic lures? Or do use it as a dedicated microwave for lure making?

@MattLunaFishing 11 ай бұрын

I don’t use it for food. I only use it for marking baits. I don’t know if it’s actually an issue, but I’d play it safe and have one dedicated for food and one for baits

@jimvalim1567 11 ай бұрын

@@MattLunaFishing Ok, thanks 👍

@tysonmcclellan7108 2 жыл бұрын

I just recently got that mold been shooting some baits for some reason they are coming out really dull looking not shiny any ideas

@MattLunaFishing 2 жыл бұрын

That’s how they turn out with the cast aluminum. Use less colorant and they’ll be a little more vibrant, and there’s probably other videos out there about using cooking oil and high heat paint on the mold to get the shiny look. This a cast aluminum mold, and not cnc. Cnc will give the shiny look.

@tysonmcclellan7108 2 жыл бұрын

I was shooting remelt plastics from some plastics I was never going to use so I melted it all down to make some swim baits. Here soon I'll be melting new plastics and making colors

@MattLunaFishing 2 жыл бұрын

Awesome. You can get really cool baits with these molds. When you make your own colors you’ll be able dial them in a little more.

@jabojr5171 Жыл бұрын

Would I be able to take this up as a hobby, if I have a really bad back with some nerve damage?

@MattLunaFishing Жыл бұрын

I think you could. I do stand when i make them, but if needed, you could probably do it sitting down if it was set up appropriately. The heaviest part of the whole process is a falling on plastisol.

@jabojr5171 Жыл бұрын

@@MattLunaFishing thank you

@MattLunaFishing Жыл бұрын

You’re welcome

@Badkharma21 2 жыл бұрын

why not dip the tails into a chartreuse dip after you make the lamination? seems like a lot of work when a simple solution exists...

@MattLunaFishing 2 жыл бұрын

You are correct, but this process will work no matter the color for the tail, but a lot of companies make baits with chartreuse tails, so people obviously want it premise.

@stevequate1797 Жыл бұрын

Ok so there is no way to pour only a tail then pour body ok

@MattLunaFishing Жыл бұрын

Not that I’m aware of. This is the only way I’m familiar with doing it. If the mold had a specific tail mold then yes you could, but there’s no specific tail mold at this time.