Check out the full engine build on the channel! Follow me on Instagram @harleystill
Пікірлер: 121
@python22288 күн бұрын
My 5.3 has 40 series Flowmasters it'd slightly modified and sounds amazing
@trevorsimmons6214 Жыл бұрын
I have a 06 cammed with longtubes, x pipe and 2 spin tech mufflers and it sounds amazing, Pretty loud cold start but driving it sounds so amy
@lyrikzthekid7165Ай бұрын
Honestly sounds perfect, I would’ve thought it would’ve had a lot more chop and be a bit louder, very quiet for a cam and straight pipe not obnoxious at all
@haroldpowell Жыл бұрын
I have same setup but 4 door crew cab and a lq9 6.0 and same cam new cam def made mine louder
@boesgarage Жыл бұрын
Man, that sounds mean! I love it! Making me wanna cam the bronco
@boost17283 ай бұрын
Chopacabra is like a stage 1.25 if there was such a thing which is perfect for trucks.
@carldalsasso86035 ай бұрын
2-1 Y pipe for +HP , to 3" for flow to FM super 10 or super 40/44 3" in 3" out if you dont want the droan🤙
@user-lf8qg8jn6e Жыл бұрын
Long tube headers will take the clap out
@tylerhubbell6410 Жыл бұрын
Agreed 👍 I have the speed engineering longtubes on my 00 gmc sierra and the clap is gone completely.Just alittle raspy
@Peculiarsafe83 Жыл бұрын
Mufflers get rid of the clap noise. If you want it loud without clapping, cut the cats off and run a single Flowmaster or aggressive style muffler. Problem solved. No clapping.
@harleystillwell7519 Жыл бұрын
Great to hear. Thank you
@josephkrakauskas9340 Жыл бұрын
Also if you do a x pipe with longtubes you won't have any clap and if you are worried about passing inspections you can do high flow cats.
@sergeantspeed594111 ай бұрын
Straight pipes will always clap. I have long tubes, and 2 1/4 duals all the way into 2 cherry bomb extremes on my cammed 76 squarebody It claps insanely loud at 2400 rpm
@bluecollarhotrods9781 Жыл бұрын
Add and X crossover, and a couple of Dynomax race bullets. It will still be loud, but have a much cleaner sound.
@harleystillwell7519 Жыл бұрын
That’s my plan👍🏻
@JimBronson Жыл бұрын
That is super clean underneath for an Illinois truck
@harleystillwell7519 Жыл бұрын
Lots of hours under there with a sander and some paint😆 really excited someone noticed😂
@billys462510 ай бұрын
@@harleystillwell7519where I live we just wash the under once a year then every 3 years coat the under with chassis saver paint
@erasedfromgenepool.48453 ай бұрын
That rEd jeep truck is bad ass!
@harleystillwell75193 ай бұрын
Thanks! Hopefully on the road soon
@jonschwartz9669 Жыл бұрын
Just get a duel in duel out muffler it might eliminate the need for an h or x pipe I ended up
@dippinlifedavid7316 Жыл бұрын
Sounds great no need to change it
@fish_R_stinky697 ай бұрын
Agreed.
@Panda-nx8bq8 ай бұрын
I have an 05 with dual cat into a 3’ inlet Flowmaster super 50 with dual 2 1/2’ outlet going out to 3’ exhaust tips for a deep aggressive growl no drone no clap full stock
@fish_R_stinky697 ай бұрын
Lol, I deleted my Flowmasters and got less drone.
@BraydenMayfield06 Жыл бұрын
Where did you get your truck turned after the cam and what all did you replace when you did the cam job I’m looking at doing one and would much appreciate the help.
@harleystillwell7519 Жыл бұрын
I had it tuned by mail order tuner. Go on the website and you can type in literally everything you did then you ship your computer to them and they ship it back only takes a couple days. And I replaced the cam, oil pump, timing chain, lifters, pushrods and every single gasket and sensor on the motor. Oil pan and rear main included because everything was leaking
@sp70587 ай бұрын
Im sure your whole neighborhood loves you fam.
@harleystillwell75197 ай бұрын
Somehow no one has complained
@tatudmarine Жыл бұрын
X and quality mufflers change that tooted sound.
@harleystillwell7519 Жыл бұрын
Both just showed up today👍🏻
@fish_R_stinky697 ай бұрын
@@harleystillwell7519 😭😭
@Captain_curiosity_Ws62 ай бұрын
Can you keep the factory y pipe after the cats? I have cat back from MBRP. it connects to the flange after the y- pipe.
@harleystillwell75192 ай бұрын
Yep I have the factory Y pipe still it’ll bolt right up like factory to the headers
@Snarf_Le_Wombat8 ай бұрын
True duals is why it sounds clapped, needs cancelation via xpipe, j pipes, or h pipe
@chiefpoopydick4 ай бұрын
Agreed I'd shift more on the h pipe x if you want just a tad more power
@storrmo9 ай бұрын
LOVE LOVE LOVE IT😊
@christopherhernandez9115 Жыл бұрын
Hey man what fog lights you running and what brackets you use for them ?
@harleystillwell7519 Жыл бұрын
They’re just 4 pods from Amazon I don’t remember the brand, and then I think I got the bracket on Etsy honestly? It’s metal and really nice. Also buy a cheap 9006 wiring extension and you can cut one end off and wire it to the pods then just plug it into your factory fog light wiring
@logicbewithyou111Ай бұрын
take the cats off, put an x pipe and black widows. It sounds like a squatted truck.
@OGpainster Жыл бұрын
You should run a H pipe and two Magnaflows, H pipes help with low end torque
@harleystillwell7519 Жыл бұрын
Yep H pipe is the plan!
@user-ng7pv6ti8z8 ай бұрын
Nice!
@drewnashtyАй бұрын
Sounds to rattlely like you've got glasspacks, get rid of the old cats, with either new hiflow units or none at all and put some classic Flowmaster 40s or Magnaflows in and it will sound like a legit muscle car with a lopey cam.
@codycaballero3660 Жыл бұрын
Do you have ac issues? I have same set up but long tubes and my ac is cuts out at stop lights etc …
@harleystillwell7519 Жыл бұрын
No sir I’ll have to pay closer attention next time but I think it stays pretty much the same temp driving and stopped
@codycaballero3660 Жыл бұрын
@@harleystillwell7519 do you have a stall converter or factory still
@harleystillwell7519 Жыл бұрын
@@codycaballero3660 factory
@brianpuryear75327 ай бұрын
What color blue is this? Do you have the paint code?
@harleystillwell75197 ай бұрын
I don’t remember the paint code but it’s called Ming blue metallic, almost purple in the sun, its beautiful
@ex-lil7574 Жыл бұрын
Does it have a pretty good chop even with cats on still?
@harleystillwell7519 Жыл бұрын
Yes a lot actually, but before the cam it didn’t chop much except for a certain rpm
@tommyofthehillpeople Жыл бұрын
Look into equal length exhaust with X pipe and add some mufflers. Otherwise, truck exhaust is going to sound like truck exhaust.
@oceanwaves83 Жыл бұрын
You should upload an exhaust clip
@tommyofthehillpeople Жыл бұрын
@@oceanwaves83 i suppose i can. You should search Andregarcia5.0. His truck sounds great.
@operatorsolidsnake2542 Жыл бұрын
Those tips look tiny look more like 3s
@PhilTooTrill3 ай бұрын
What rearend is that?
@harleystillwell75192 ай бұрын
It’s the stock axle with a PPE cover powder coated illusion cherry
@ridin_solo6 ай бұрын
put some 12-18 in glass packs on er
@user-yz2wj9he2v6 ай бұрын
what size pipes
@harleystillwell75196 ай бұрын
2.5”
@05cateye96 Жыл бұрын
Did you have to tune it?
@harleystillwell7519 Жыл бұрын
Yes I sent my ecu to mailordertuner.com with the cam specs and they mailed it back all ready to go
@05cateye96 Жыл бұрын
@@harleystillwell7519 what kind of mpg do you get? Is it still good enough for a daily driver i have the same exhaust and same truck but i dont want to not be able to drive it like normal when i cam it
@andrewa53738 ай бұрын
My 2001 6.0 runs best with an X flow muffler. Ran straight pipes and major loss of torque, and gas milage.
@Snarf_Le_Wombat8 ай бұрын
Plus it always sounds terrible unless it's a fuel racing setup that doesn't need exhaust scavenging
@fish_R_stinky697 ай бұрын
Lol, it's just in your head.
@Snarf_Le_Wombat7 ай бұрын
@@fish_R_stinky69 No it sounds bad because it is bad, are you not familiar with exhaust pulsing and the scavenging positive effects from exhaust thermodynamics? Even a rookie would know true duals almost always sound terrible without balancing or the effects of canceling each other engine banks resonance....etc.etc.
@Truck-This-564 ай бұрын
I like the sound but I would not like it if I had daily drive it
@AS-yg2jv2 ай бұрын
I gotta know, how bad are the MPG's on your rig lol
@harleystillwell75192 ай бұрын
Smiles per gallon man!😂 just kidding, it’s telling me 13
@operatorsolidsnake2542 Жыл бұрын
Do a x pipe. It's still gonna be clap trap unless you do like slp quad tips for a ws6 or get the square tip borlas with circle pipe inside. They will be in alot of trans am videos tips and size and shape of the tips make a huge difference
@operatorsolidsnake2542 Жыл бұрын
kzfaq.info/get/bejne/edB1Z6h23MC5pWQ.html the quad tips make a big difference
@Captain_curiosity_Ws62 ай бұрын
How did you get the factory cats to connect to the shorty headers?
@Chevy_Guy2 ай бұрын
They bolt straight up
@user-mo6bw2el3q2 ай бұрын
Did you have to get it tuned
@user-mo6bw2el3q2 ай бұрын
I ask doing something as well 08 lt chevy silverado 5.3 lifter 1 finally collapsed so doing up grade so looking for cam now what I can get without tune and what will need to be turned want the chop sound, help if you point me In right direction, Thanks
@harleystillwell75192 ай бұрын
No matter what you do it’ll have to be tuned sadly. But I had mine tuned from a website called mail order tuner. I mailed it to him and said what I did and he sent it back tuned. Only about $300.
@jonathandeleon558810 күн бұрын
@@harleystillwell7519do you have to run a specific type of fuel now?
@darioguerrero4374 Жыл бұрын
Do you have a stall?
@harleystillwell7519 Жыл бұрын
Nope factory converter. I went with this cam because they advertise that it’s factory converter friendly and just last year I had the trans built to a 4L65 and didn’t want to replace my brand new converter
@cw.weldingco.341 Жыл бұрын
@@harleystillwell7519 since you just did the upgrade not long ago, does the 4l65 have an extra gear over the 60?
@harleystillwell7519 Жыл бұрын
@@cw.weldingco.341 no sir it’s just stronger internally. Still a 4 speed
@countrycarni Жыл бұрын
Long tubes with a xpipe
@harleystillwell7519 Жыл бұрын
Think I’m gonna do an H pipe and lose the cats
@operatorsolidsnake2542 Жыл бұрын
@@harleystillwell7519x pipe and he's right spend the 299 get the speed engineering long tubes it will make it sound more Camaro trans am ish than squat truck
@jackmcminn2520Ай бұрын
I'd put 2 super 10s on it
@joshritchie_media Жыл бұрын
Was waiting for redline 😕
@harleystillwell7519 Жыл бұрын
Let her get broke in first😂
@joshritchie_media Жыл бұрын
@@harleystillwell7519 always break it in how ur gonna run it 😆
@harleystillwell7519 Жыл бұрын
FACTS
@dylanfinch61865 ай бұрын
Needs mufflers. Will actually run better.
@harleystillwell75195 ай бұрын
It’s got them now👍🏻
@jonschwartz9669 Жыл бұрын
Black widow hour glass internal design no drone thick stainless neighbor hater is the loudest no hour glass design next loudest is neighbor hater this model has the hour glass design and has duel in and duel out
@fish_R_stinky697 ай бұрын
Not too loud.
@chrishansen70042 ай бұрын
I guarantee you it’s a lot louder in person
@fish_R_stinky692 ай бұрын
@@chrishansen7004 I have a straight-piped truck IRL.
@fish_R_stinky692 ай бұрын
@@chrishansen7004 I also have a straight-piped Foxbody.
@ghumphrey859 ай бұрын
Sounds obnoxious. But to each his own.
@harleystillwell75199 ай бұрын
I agree! Too obnoxious haha
@fish_R_stinky697 ай бұрын
💀
@fish_R_stinky697 ай бұрын
4:16 EWWWW😨
@harleystillwell75197 ай бұрын
What
@fish_R_stinky697 ай бұрын
@@harleystillwell7519 What
@fish_R_stinky697 ай бұрын
@@harleystillwell7519 Oh, there's a gurl there : (
@brandonnunez36446 ай бұрын
Personally ill never understand why people make slow ass trucks/cars super loud, they never sound good 💀 but hey to each his own
@ihatecarslmao6 ай бұрын
It literally has a cam in it
@brandonnunez36446 ай бұрын
@@ihatecarslmao okay?? Whats thats got to do with anything ? 😂
@ihatecarslmao6 ай бұрын
@@brandonnunez3644 do you understand what a cam does
@brandonnunez36446 ай бұрын
@@ihatecarslmao yes.. again.. whats that got to do with anything?
@harleystillwell75196 ай бұрын
Sorry you don’t like it
@johnmask7459Ай бұрын
If there are cats it doest have straights those still muffle