This is a 2012 chevy cruze. These turds are all the same.
Пікірлер: 143
@o2tank0464 жыл бұрын
It's amazing you know where all those bolts go back into. Thank you for sharing! Awesome video!
@CarMechaNick4 жыл бұрын
Thanks! Im big into organization I'll show how I put them on my magnets. It all helps with speed!
@eddiesheeran57914 жыл бұрын
Thanks for taking the time to document and share this. I'm halfway through a carport engine swap on a 2011 Cruze that overheated, blew the head-gasket, and warped the block. I took the engine and transmission out together so I can swap the transmission to the new engine, and then drop the two back in the car as one piece. This strategy works really well if you have to do this job without a lift + fully equipped shop.
@CarMechaNick4 жыл бұрын
Thats awesome advice man! My first ever engine job was on my own car in my back alley on ramps. Anyone with the want can get it done. You're awesome keep up the good work!
@JustLearningbyDoing Жыл бұрын
Great instructional video. I have a 2012 Cruze transmission to replace soon. Thanks for the video.
@CarMechaNick Жыл бұрын
Thanks!
@patrickmcclatchy91212 жыл бұрын
Love the short and sweet 10 minute video. Gave me the general direction I needed to take. I’m so happy you can just unbolt the rack and sway bar from the cradle and drop it. I was flabbergasted that I couldn’t take it out the top when this pays 9.7 hours. I guess it’s easier then it looks. Appreciate your time man. 👍🏻
@CarMechaNick2 жыл бұрын
Thanks! Some of these cars are put together like they were meant to be taken apart.
@zoticus13 жыл бұрын
Great video, my dude. I just did a r&r on a 13, 1.8 . I pull the whole drivetrain assembly, takes about 3 hours (removal!) max on the ground, using a load leveler with cherry picker. I don't even mess with the cradle, only strut spindle bolts to remove cv joints. I've done a lot of these, very easy to work on.
@CarMechaNick3 жыл бұрын
Thanks! Thats awesome great info!
@brennanobieone87403 жыл бұрын
Cool, come do mine for me lol
@CarMechaNick3 жыл бұрын
🤣🤣
@zoticus13 жыл бұрын
@@CarMechaNick sorry I didn't mean 3 hours total, just removal!
@napieraustin4 жыл бұрын
Just did a 2012 Chevy Cruze engine . Went up and out with engine and transmission. Put transmission and any other good parts on new engine. CHECK HARNESS AT AC COMPRESSOR! New engine came with harness. Everything was the same except the ac compressor needs 2 plugs and harness only had 1 so we had to swap harness after we already dropped in car. Still wasn’t to bad but had a lift when needed under it. Took us 10 hrs to do swap. But was first time pulling a engine and transmission
@CarMechaNick4 жыл бұрын
That's awesome. I always use the engine that came with the car. Assuming it is in good condition. Sometimes these motors from salvage yards come from different years or other models when they can. So it's best to use the original harness from the car.
@brotherkron3 жыл бұрын
I gotta do one today should be fun.. thx for the video.
@CarMechaNick3 жыл бұрын
They are cake have fun! 👍
@semirm8248 Жыл бұрын
Im about to take on a project like this in my 2013. Did you have to reflash the ecu after? Or anything electronic. And also how long did it take you to complete?
@antoniocervantes12343 жыл бұрын
@Car MechaNick do you by any chance have an installation video.? Me and my tech are having difficulty stabbing it back into the engine. Greatly appreciated!
@CarMechaNick3 жыл бұрын
I don't I'm sorry. Put a little lube on the pins and the pilot hole that may help. You can line up a bell housing bolt and thread it a few, then try lining up another. Make sure the converter is set all the way into the trans as well. I hope that helps! Lmk!
@TexasRoast3 жыл бұрын
The only good thing about the Cruze is that it's common enough to find how-to videos on pretty much anything in them (because they break all the time). I was already having issues with the damn thing when the driver-side window regulator failed. Thankfully it proved to be easy to fix by myself. It only has 70,000 miles on it and I already had to have the engine rebuilt due to coolant leaking into the cylinders. That happened at 60,000 miles FYI. Thankfully I got an extended warranty on the powertrain so it didn't cost me anything.
@CarMechaNick3 жыл бұрын
Yeah some dealers have a lifetime powertrain. One of the techs at my work has on his newer impala. I always tell my friends my views on my videos show a good idea which cars are the bigger turds. I mean let's face it even the good ones boil down to turds.
@skgarrison46349 ай бұрын
Hello I have a 2013 Chevrolet cruze LS 1.8L engine with 227,000 miles, I haven’t ever changed the tranmission or fluid, do you I have to change it or i do not?
@dirediredude4 жыл бұрын
Nice work! Have you done this job on any 2018's? Just wondering if it's a similar procedure.
@CarMechaNick4 жыл бұрын
Thanks! I have not, if I do and if appears different I'll make a video for sure.
@keithdin73374 жыл бұрын
wOW! This is one best video! Job made easy! Tell me, a friend of mine has 2012 Cruze but after his transmission (clutch plate) was recently changed, the car doesn't crank/start. He told me he has to kick/push-start it daily. Could it be that the guy who changed or worked on the transmission interfered with starter solenoid perhaps?
@pack13sheet4 жыл бұрын
Just the video I've been looking for... thanks.... subscribed!!! ☺️
@CarMechaNick4 жыл бұрын
Awesome thanks!
@trublue23196 ай бұрын
What kind of pliers are those
@cosmo78164 жыл бұрын
Very Nice job!
@CarMechaNick4 жыл бұрын
Thank you. Appreciate you watching!
@Firecracker899 ай бұрын
Can someone explain to me how to get transmission module clip off the one that's clipped onto the cover right at the transmission module is behind it the big red and light grey clip I can't seem to figure out how to get it off and I don't want to break it I got a 2015 Chevy Cruze I just need to get that clip off in order to get to the module so I can clean it the song noise all that pleased can someone explain to me how to unclip it disconnected whatever you want to call it
@eddiedejongh78793 жыл бұрын
Do you use a Engine brace on top to support the engine?
@CarMechaNick3 жыл бұрын
I used a single post stand to support the engine. You can use one up top but you can't lower them from underneath like you can with the stand.
@1983bigfrank4 жыл бұрын
Hey my guy you seem like you did that was so much ease and confidence. I know you must be a professional. Just a quick question. I know that's not I Wrong a right answer. But for some time I car seems to not be pulling with a lot of power. Now a year later. I got these codes PO700 and p 0 0 16 Looking it up. They say it's related to the solenoid in the transmission. Or the crankshaft sensor or exhaust sensor and my card now. Sometimes it has slipped reverse gear. But then it jumps back in. And it will go into every gear. But I can tell the power is not there. What I really need to look into. The solenoids and the sensors I would that maybe a whole transmission problem. Sir Please answer me. Thanks in advance.
@CarMechaNick4 жыл бұрын
You should look at live data and see what the computer is doing. Its really hard to diagnose a car over text/phone calls. Anyone in your area with a few years of good experience should be able to figure out the issue.
@oldmanriver89223 жыл бұрын
Do you have to support the radiator and condenser from the top before you drop the subframe?
@CarMechaNick3 жыл бұрын
It wouldn't hurt to use some mechanics wire up top or a bungie on the bottom. I do so many and have done it without support and had no issues.
@dennisalcocer69023 жыл бұрын
Hi good evening. We have a 2012 cruze and We just replace the rear main seal and everything came out good. Only problem I have now is a can feel a slight vibration on the steering wheel. It didn't do that before. Any ideas? You think maybe sub frame bolts on to tight? Please help. Thank you
@CarMechaNick3 жыл бұрын
Are the rack bolts tight?
@saulbroa75512 жыл бұрын
Finally finished installing my transmission but when I started the car the "manual shift" option doesn't appear in the dash when I move the gear shut stick to that position. Got a licensed stablishment to reprogram the transmission but still won't get it. Is it because the transmission wasn't rebuilt properly or it needs to be programed differently?
@JamesRazorbacks2 жыл бұрын
Think there a ground wire this video didn’t show taking off , think it’s on the rack somewhere
@julianmikoloski72152 жыл бұрын
Nick... I am currently working on replacing my clutch on my 2011 Cruze--- my haynes manual tells me that I need to use wire to hold the steering gear/ rack up by attaching the wire to the frame... however I don't see you do anything the hold the steering mechanism up... is there something I need to do or does it just hang there after the subframe is removed?? After I get the subframe off I feel like the job will move smoothly Thanks Julian
@CarMechaNick2 жыл бұрын
Any little holes you may see. But its nothing to crazy to do. Try to avoid hanging from brake and AC lines. Good luck! 👍
@julianmikoloski72152 жыл бұрын
@@CarMechaNick Thanks Nick--- would you say that your video here is a step by step and I would be able to follow it to do the job?
@julianmikoloski72152 жыл бұрын
@@CarMechaNick And one more question.... do i need to take the Tie-rods off?? It doesn't look like you take them apart
@crisediosbany4 жыл бұрын
Did you have to reflash the ECU or reset transmission adaptations after?
@CarMechaNick4 жыл бұрын
Shift adapts and you're good to go.
@crisediosbany4 жыл бұрын
Car MechaNick Thanks boss
@saulbroa75512 жыл бұрын
Did you have any problems with the steering angle after installation?
@CarMechaNick2 жыл бұрын
Nope 😁
@father.of.4.azzholes4 жыл бұрын
I've got a 2011 eco with 6 speed. Can the clutch and flywheel be replaced without fully removing the trans? My last car you could just pull them apart from one another and had enough room. Mines starting to slip and I figure I'd get rid of that dual mass garbage.
@CarMechaNick4 жыл бұрын
You may be able to im not sure. When doing it at home that may be easier for some. I've always fully separated the two.
@father.of.4.azzholes4 жыл бұрын
@@CarMechaNick ok gonna be some trial and error lol. Im planning to do it here very shortly. Any advice on problems you ran into on r&r?
@CarMechaNick4 жыл бұрын
Its not bad just be patient. Ill try to answer any questions you might have.
@betuki3 жыл бұрын
If the subframe is lowered, does the engine / transmission fall?
@CarMechaNick3 жыл бұрын
Nope, the mounts hold it. When removing the trans, you do need something to support the engine. Because you're removing the trans.
@zaidchalabi1599 Жыл бұрын
atleast 100 bolts. how do you not lose them and know where they go!!! my cruze transmission is not shifting and getting this swap done this week. was wondering how much work it is. ALOT
@CarMechaNick Жыл бұрын
Lots of bolts indeed!
@ninorohena60103 жыл бұрын
When you replace the transmission do you have to program it??
@CarMechaNick3 жыл бұрын
Best to do shift adapts. It's hard to remember what cars need what process. Typically our snap on or autel scanner do. If not we just ship them to the dealer.
@whitebuffalo14262 жыл бұрын
Is a Chev Trax the same kind of procedure to replace the transmission?
@CarMechaNick2 жыл бұрын
Should be very similar
@qureshi31342 жыл бұрын
When I am accelerating Cruze 2013 above 60 it's dropping the speed UpTo '0'.... Exactly don't know what's the problem....some one is saying, needs to change spark plugs, gear oil..... One mechanic told gear box needs to be repair or fix... Could you help me please....
@CarMechaNick2 жыл бұрын
I wish I could help you but it's hard to diagnose a car here.
@FlippingTheFort2 жыл бұрын
Wait, so what part was broken? Which fluid leaked out?
@chrisbowpiloto Жыл бұрын
That's a cover on the front of the transmission, lost all the automatic transmission fluid
@jaimeleonmoreno3 жыл бұрын
Hi what about a 2013 cruze? Is it the same ?
@BritneyLeeElizabeth Жыл бұрын
Or 2015
@Chris-mp3tqКүн бұрын
How many labor hours 😢
@brianwright84333 жыл бұрын
What all socket sizes did yu use for the removal
@CarMechaNick3 жыл бұрын
Its been a while so its hard to remember. I want to assume lots of 13mm 15mm 18mm and some e torx or whatever you want to call them. Typical Chevy sizes here a standard socket set would have them all.
@brianwright84333 жыл бұрын
@@CarMechaNick what about the Chevy trailblazer engine what sockets
@arturalbertyan9073 жыл бұрын
Chevrolet Cruze 2012, 1.8 manual transmission 6speed what diameter clutch kit
@CarMechaNick3 жыл бұрын
I wish I knew that answer?
@tedsgibson2 жыл бұрын
Made that look to easy!
@CarMechaNick2 жыл бұрын
Haha thanks! 😄
@kkjjffss2 жыл бұрын
Seems really doable, thanks for this💯🛸💨👽👍
@rollinspokes73957 ай бұрын
Love It
@viniciusderricodasilva76954 жыл бұрын
Hi, great job! Do you have a video installing this transmission?
@CarMechaNick4 жыл бұрын
Unfortunately i don't. I can add it to the list though and next time I do one I'll make a vid of their install.
@viniciusderricodasilva76954 жыл бұрын
@@CarMechaNick It's ok. This video will help me a lot. Thank you very much! You whould have a table torque for all this screws?
@DougsAwesome123 жыл бұрын
i’m getting my 2015 cruze transmission rebuilt under warranty. would it be easier to rebuild it or replace it, what would you do?
@CarMechaNick3 жыл бұрын
They remove it to rebuild but I'd be okay with a rebuild. Just service it when they suggest.
@DougsAwesome123 жыл бұрын
Car MechaNick a certified chevy dealer is doing it under warranty so i trust them i just wish they would have replaced it lmao but it’s free so i can’t complain
@CarMechaNick3 жыл бұрын
I'm sure it will work great 👍
@miceinoz11813 жыл бұрын
Guys, plenty on these 6T35/40/45 and even the 6T70 series on the web (see Gary Ferraro posts). The wave plate in 3,5,R drum breaks and takes out the circlip. First sign is no reverse and 3, 5 shift issues. Sonnax has a drum saver kit that prevents this happening again as the GM updated wave plate breaks as well. I would make sure I have the Sonnax drum saver kit installed at rebuild, otherwise you are just waiting for the same thing to happen again. If you keep driving with it broken, it can get very expensive pretty quickly. I am in the middle of doing one right now.
@CarMechaNick3 жыл бұрын
Great info I'll look into that. We don't rebuild or have a dedicated builder unfortunately.
@markjou97993 жыл бұрын
I have a 2018 Cruze and the car is absolutely horrible in stop and go rush hour highway traffic especially at 20-30mph. Its almost a downright nightmare. The shifting is so sloppy and rough that it ends up giving me a headache.
@CarMechaNick3 жыл бұрын
Dang, I'm sorry to hear that Mark. Things cars are really hit or miss when it comes to the transmissions. Atleast it feels that way.
@treychavis22323 жыл бұрын
Is the procedure pretty much the same for the Chevy equinox???
@CarMechaNick3 жыл бұрын
It's got some pretty bug differences and idk why I haven't put a video of it because I've done a million. It does require removing the subrame but the starter is in a different location. Along with some other things. Not a hard job though.
@treychavis22323 жыл бұрын
@@CarMechaNick Knocked out the Equinox yesterday, only thing I did different was dropped the Rack w/ the Subframe. Great video sir 🤟🏽
@CarMechaNick3 жыл бұрын
@@treychavis2232 That's awesome man! 👌thanks! Keep up the good work. 👍
@wallacephilippe32264 жыл бұрын
@carmack hi sir, I have a 2013 buick regal turbo and my car won't take drive and it has a whistle sound coming from the transmission. Now I had taken down the tcm board an clean the solenoids an put it back and got the same issues.
@CarMechaNick4 жыл бұрын
It sounds like you need to remove and inspect the entire unit or replace with a new one buddy.
@sahudansari2432 Жыл бұрын
I Have 2012 chevi cruze 1.8 where i find transmission number..?
@CarMechaNick Жыл бұрын
RPO codes in the glove box.
@El161003 жыл бұрын
So why was the transmission removed?
@CarMechaNick3 жыл бұрын
Someone at one of our stores said it was bad so I replaced it. I can't recall, sorry.
@Newb_Manster Жыл бұрын
1:30 this is what happens to your Prius but quicker lol
@CarMechaNick Жыл бұрын
Hilarious 😂
@pearljameric3 жыл бұрын
Take me back to the days cars were simple to fix.
@CarMechaNick3 жыл бұрын
😂😂 But these ones are, I promise! Atleast it's not a hybrid or electric. Those are much less fun than these. 😁
@tallevi617210 ай бұрын
I would say it will be much better to take out all the power unit up, take apart the transmission and put the new one in, and 0ut it all back...
@javiles23314 жыл бұрын
Awesome video!! Do you have any idea how much could cost something like that? Thank you again awesome video
@CarMechaNick4 жыл бұрын
Thats a good question. I can't remember how many hours the job calls for, maybe around eight hours or so. Which in my area shops average about 110 per hour for labor only. Then you have to pay for the unit and your fluids.
@mikeflay124 жыл бұрын
@@CarMechaNick my transmission just exploded in my 2011 CD cruz and they told me around $5000 to replace.
@CarMechaNick4 жыл бұрын
@@mikeflay12 Wow that's a bunch of money. Was that a full rebuild with a warranty? A used unit is typically cheaper. But you also have chances of having reoccurring issues if you replace with a used unit versus a rebuild.
@mikeflay124 жыл бұрын
@@CarMechaNick that's new transmission and installing warranty wasn't discussed they are renowned for transmission problems car has only 150.000 ks on the clock and the first time the trans gave out they reconditioned it wich cost me $2000 so I told the mechanic $5000 is to much I could get a reasonable car for that price
@chazzmccloud362 жыл бұрын
My 2011 Cruze trans went to hell, got a quote for a replacement at about $4300, and got told by the shop that it'd be no guarantee that the replacement wouldn't have problems right away. Was looking into swapping out for a manual transmission, but that looks like waaaaay more work than I know how to do.
@FordPickUPRed Жыл бұрын
I just heat my bolts instead of cutting. A before O or up you go lol.
@matthewmarsh19714 жыл бұрын
My clutch just went.. Looking at this video is scaring the shit of of me and wishing I bought a 2 post lift vs a 4 post
@CarMechaNick4 жыл бұрын
Nothing to be afraid of Man!
@napieraustin4 жыл бұрын
matt if can’t get our bottom. pull engine and transmission up and out. Then fix and put back in.
@dillaseven93732 жыл бұрын
My mechanic refused to replace our transmission even though we could afford it. I see why 😂😂
@CarMechaNick2 жыл бұрын
It's good to have a guy that knows his limits.
@chrisgeorge57674 жыл бұрын
How do you reset the transmission. Replacing transmission from junk yard
@CarMechaNick4 жыл бұрын
You need a proper scan tool. I have two that my job supplies. Or you can take it to the dealer.
@chrisgeorge57674 жыл бұрын
@@CarMechaNick so it differently needs reflashed after install.can it relearn on its own
@CarMechaNick4 жыл бұрын
@@chrisgeorge5767 You can try whatever you want. I personally don't do that.
@keithdin73374 жыл бұрын
@@CarMechaNick Does "reflashed" mean resetting the ECU with a scan tool? My friends 2012 cruze doesn't start after his transmission work! Surely the guy who worked on it did something seriously wrong in there! But my suspicion is a solenoid or fuse relay.
@CarMechaNick4 жыл бұрын
You do shift adapts. I would check the grounds. And make sure his voltage is being supplied to the right connections. Should have a 12v constant, typically the thicker wire. Then the ignition wire the smaller will have voltage when key is cranking. Use jumper cables to make see the block is grounded to chassis. Does the starter make any noise when you try to crank?
@irfansayyed22222 жыл бұрын
Is this car is 6 clynder or 4 can anyone help
@CarMechaNick2 жыл бұрын
As far as I know every cruze was a 4 cyl. This one here, is a 4 cyl.
@angeltavarez75553 жыл бұрын
Hi r u removed the muffler to remove trans? I quest u work in a dealer 👎🏽
@miceinoz11813 жыл бұрын
Technically only need to remove turbo flange bolts, but as you saw, the removal is pretty quick and it gives you much more room around the starter to acess the torque converter bolts. Sometimes taking bits off that are not needed makes the whole job a lot faster and easier. He works in a big shop, so time is important to them.
@CarMechaNick3 жыл бұрын
You're right you can leave it, just use a cord to hold it to the firewall. Like you said, not hard to remove, same goes for subframe. Thanks for watching! 👀🙂
@shirneetbenzo66192 жыл бұрын
Should’ve just pulled out engine and gearbox
@richardpenaflor20194 жыл бұрын
Just changed old transmission with a junkyard one but the car won’t turn on. Do I have to reset the car or did I do something wrong? Pleas help
@CarMechaNick4 жыл бұрын
Do you have your grounds bolted? I see this issue more than any other with guys that dont do this regularly.
@richardpenaflor20194 жыл бұрын
Car MechaNick well all the bolts we took off we put back on. I feel like the car isn’t in park because when we shift down it skips reverse.
@richardpenaflor20194 жыл бұрын
Well we just fix that part but it still won’t turn on. Where are te bolts located and how many?
@richardpenaflor20194 жыл бұрын
Car MechaNick we double checked everything and it was a ground bolt! Thank you so much.
@CarMechaNick4 жыл бұрын
So sorry I wasn't able to respond but hey good job! Never give up!
@reginocastro79054 жыл бұрын
Como. Savard. Las. Tuerca. Del. Conbertidor. De. La. Tramicion. De. Un. Vruse. 2015
@pepinillorick1214 Жыл бұрын
Bro used the 1/2 matco impact on battery nuts and bracket bolts 🤣 🙊 fuck it
@CarMechaNick Жыл бұрын
I mean, it worked didn't it? And it is a 3/8 not 1/2.
@BraydenTaves3 ай бұрын
That fuckin Matco puts in work gawd damn
@josesantiago185 Жыл бұрын
All nothing all I saw how to steal money from people at dealership not how to replace the parts scammed