Chevy Equinox intake removal PCV clean and high-pressure fuel pump removal 2.4 four-cylinder

Рет қаралды 183,403

4 жыл бұрын

Several people have commented on this video and said that this helped them out so you may as well give this vented oil cap a try here is the link to the Amazon for it.
Note : I’ve never personally used it but several people have commented that it worked on their 2.4. Probably wouldn’t hurt on the 3.6, 3.5 3.4 and 2.2 either….
amzn.to/3F3IEeP
If you ever had to remove your intake off your 2.4 eco-tech this video is going to show you how to, Nut and bolt remove it along with showing you how to also remove the high-pressure fuel pump off your cylinder head this information is going to be useful on the 2008 2009 Chevy equinox but is going to be different because the 2008 and 2009 do not have a high pressure fuel pump like this one does . This information will be also very useful for cleaning the PCV valve on the 2.4 eco-tech so pay attention to what I say and how I talk about it and hopefully we can keep your vehicle on the road for many more years. I appreciate you taking the time to watch the video God bless and have the best of days
if you own a 2010 Chevy equinox ,2011 Chevy equinox, 2012 Chevy equinox ,2013 Chevy equinox ,2014 Chevy equinox, 2015 Chevy equinox ,2016 Chevy equinox ,2017 Chevy equinox, 2018 Chevy equinox ,2019 Chevy Equinox
You should watch the whole video .(sometimes I’m fun) So you can inform yourself with all the great information that I put in my videos and God bless. I hope the videos helpful for you!
And Thank you for viewing!
Have a great day
“You can’t really break it if it’s already broken!”
Please subscribe!!!
if you want to reach out to me and get a message to me hit me up on clays ac and auto repair on the facebook And if you have any questions it’s easier to message me straight through Facebook
Why should you Subscribe to my channel ? I constantly make these videos that show you how to use your tools and show the techniques that we use in our auto repair shop every day. And all it does is help me send you stuff . I do not sell your information I do not solicit you. all it does is add a couple 100 thousands of a cent to me . And it cost you Nothing ! you would only be helping me . And hopefully i was able to help you !! So please be kind and enjoy!!
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products
List of cars names
Chevy trailblazer ,GMC envoy , Cadillac Sts ,Cadillac SRX ,Cadillac Escalade, Chevy avalanche ,Chevy Silverado ,GMC sierra ,Toyota RAV4 ,Honda CRV, Acura MDX, Volvo XC 90 Volvo S 70, Audi A4 , Audi asix Audi S4,Volkswagen Passat, Volkswagen tiguan Chevy Equinox ,GMC terrain , Chevy Silverado, GMC sierra, GMC Acadia ,Chevy traverse,Pontiac Grand Prix ,Pontiac G6, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018Jeep grand Cherokee ,jeep commander ,jeep liberty,Jeep patriot, 1995,1996,1997,1998,1999, 2000, 2001,2002 ,2003, 2004, 2005 ,2006 ,2007, 2008, 2009 ,2010 ,2011, 2012, 2013 ,2014 2015, 2016, 2017 ,2018 Chevy impala ,Chevy Malibu, Ford F150, Ford escape ,ford fusion ,ford Taurus, Dodge Nitro ,Chrysler 300 ,Dodge ram. Pontiac Sunfire, Pontiac Torrent

Пікірлер: 255

@chrisssmith3206 10 ай бұрын

ATTENTION----ATTENTION THESE WERE ALL MY SYMPTOMS AND THE THINGS I REPLACED ON THE CAR BEFORE I SEEN THIS VIDEO AND SOLVED MY PROBLEMS. I HAVE A 2012 2.4L ENGINE CHEVY EQUINOX EXACT ENGINE AS THIS ONE. MY VEHICLE WAS WAS SHAKING AND ROCKING AT A COMPLETE STOP AT THE RED LIGHT, ITS WAS JERKING SO BAD AFTER DRIVING FOR A WHILE THAT I HAD TO PUT IT IN NEUTRAL EVERY TIME A CAME TO A RED LIGHT. I REPLACED THE FOLLOWING THINGS: UPSTREAM AND DOWNSTREAM O2 SENSORS---PURGE VALVE----AIR INTAKE SENSOR REPLACED THE LITTLE U PLASTIC TUBE GOING TO THE AIR BOX, THE ONE THATS FILLED WITH WATER SOMETIMES. I REPLACE THE THE THROTTLE BODY WITH SENSOR ON IT-------I REPLACED THE FUEL CAP AND THE OIL CAP-- I USE CAT CLEAN AND OIL ADDITIVES--- I CHANGE THE TWO ENGINE AND INTAKE VALVES THAT SIT ON TOP OF THE ENGINE (GREY AND WHITE ). I DID MUCH MORE BUT WHEN I SEEN THIS VIDEO, I SAID TO MY SELF, ITS NO WAY IN HELL THIS IS MY PROBLEM AT ALL, NO WAY!!!! IT WAS THE FOURTH OF JULY AND IVE HAD THIS VEHICLE FOR 5 MONTHS NOW AND ITS BEING DOING THIS SINCE I BOUGHT IT. I HAD CONVINCED MYSELF THAT IT WAS JUST THE TIMING CHAIN THAT HAD SKIPPED, LIKE THE ONES YOU SEE ON KZfaq, BUT IT WAS THE 4TH OF JULY I WASN'T DOING ANYTHING SO I SAID TO MYSELF, LET ME RUN INSIDE A GET MY DRILL. I GOT THE SMALLEST SCREW I COULD FIND, I FOUND TWO THEN THE LITTLEST DRILL BIT AND I DRILL A HOLE IN THE AREA I SEEN IN THE VIDEO AFTER REMOVING ALL THAT PLASTIC AIR INTAKE CRAP, IT TOOK ME 2 SECONDS BUT I DIDNT FIND THE HOLE, SO I HAD TO DRILL ANOTHER HOLE UNDER THE FIRST I DID CASE IT WAS TO HIGH FROM THE HOLE INSIDE THE ENGINE MANIFOLD. BUT THE SECOND HOLE WAS PERFECT SO I TOOK SOME CARB CLEANER WITH THE STRAW AND SHOT THE CLEANER ALL IN THAT NEWLY DRILLED HOLE, CARB CLEANER SPLASHED EVERYWHERE CAUSE OF THE TWO HOLES I MADE. AFTERWARDS I TOOK A PAPERCLIP AND WENT THROUGH THE DRILLED HOLE TIL I FELT THE OTHER HOLE INSIDE THE MANIFOLD, WIGGLE IT IN AND OUT THEN SPRAYED SOME MORE CARB CLEANER IN IT AND TOOK MY TWO LITTLE SCREWS AND SCREWED THE TWO DRILLED HOLE SHUT. I PUT EVERYTHING BACK TOGETHER AND IT TOOK ME LESS THAN 12 MINS, ENJOYED THE HOLIDAY FOOD AND DIDNT THINK OF IT AT ALL. I JUST WANTED TO SAY I DID EVERYTHING POSSIBLE BEFORE I LET THE DEALER FIX THE TIMING CHAIN. BUT WITH MY AMAZEMENT THE NEXT DAY. I STARTED THE CAR AND I FERLT SOMETHING DIFFERENT, YOU JUST COULD FEEL IT. YUP, GO TO FIND OUT THAT ALL THESE PROBLEMS MY VEHICLE WAS HAVING WAS BECAUSE OF THIS SMALL PIN SIZE HOLE THE ENGINE WAS FIGHTING TO GET AIR FROM. THIS HOLE WAS PLUGGED UP WITH CARBON JUST AS THE VIDEO DESCRIBES . SO THATS MY STORY, I HOPE THAT YOU ALL CAN USE THIS TO SAVE YOU A LOT OF GUESSING AS I DID. THANKS FOR TAKING THE TIME TO READ MY WALL OF LOUD TEXT, LOL

@mitchellharmon9947 7 ай бұрын

Mine has a rough idle at start but smooths out shortly after. Do you think it’s the same?

@firemanfred2175 21 күн бұрын

Thanks for this video. Great explanations and easy to follow steps. Most videos out there lack good or clear shots of what have to be removed or where they are. Thanks for taking your time to do this!

@TheNAVagator 2 жыл бұрын

I just want to say thank you for this video. I was noticing my equinox 2013 not driving well. Chevy had extended the warranty to 120K miles for the PCV orifice, however apparently my VIN was not covered. After a long fight with them I decided it wasn't worth it. I opened their bulletin and used a manometer to confirm PCV was blocked. Engine was bucking, there was white gum (condensation) at the oil fill cap (and no I'm not losing coolant). I checked the PCV hose like you said, and it was gummed up as well, with oil in the air box. I was consuming some oil as well. These are all symptoms of a clogged PCV. I decided not to drive the vehicle for a few months until I had time to fix it. For all of you decided if you should look into this, the answer is YES. After Chevy denied to work on it, I reached out to a local mechanic and he was quoting me 500 to 700 USD. So I decided to open it up myself. PCV orifice was blacked out and gummed up. Used to WD40 Carb Cleaner, placed high pressure into the orifice as well as cleaning with a drill bit. Put everything back together. Overall tooK less than 2 hours of my own time. I did not need to change the gaskets or PCV hose. I cleaned everything out. Cost for the job is $0. If you need a new PCV hose, you can get it on amazon for $10. For 2 hours of time, this was completely worth it. My equinox is driving like new now. PLEASE DO NOT WAIT FOR THIS TO CAUSE YOU AN ISSUE DOWN THE LINE. I WILL BE DOING THIS EVERY 1 - 2 YEARS. IF YOU DO NOT TAKE CARE OF THIS, YOU WILL FOR SURE DEVELOP AN OIL LEAK FROM ALL THE PRESSURE BUILDING UP IN THE SYSTEM. THE OIL LEAK FROM THE REAR MAIN SEAL (WHICH IS THE MOST COMMON IN THIS CASE), THAT WILL COST YOU $3000 TO $5000 IN REPAIRS. JUST TAKE CARE OF THIS, IT TAKES A FEW HOURS. I AM NOT A MECHANIC IN ANY WAY AND WAS ABLE TO DO IT. I WORK IN HEALTH CARE LOL.

@bnolascor 2 жыл бұрын

hay slguna manera de limpiar el pv sin desarmar todo eso? desconecte el pvc y se ce muy espeso el aceite y como si estuviera mixtiado con agua pero no esta perdiendo refregerante.

@thommytruong29 2 жыл бұрын

Hi! What was the mileage on your car when you found it had PVC clogged up? I'm buying an 2017 equinox, and planning to do this every year as well. How's the weather in your area? Mine is around -30C in the winter, so I'm not sure if doing it once a year would be enough

@sharpcarco 2 жыл бұрын

Sorry this was an excellent excellent message I did not see it before but thank you so much for the testament and I’m glad that it helped

@TheNAVagator 2 жыл бұрын

@@thommytruong29 I live in Toronto and Upstate NY. So we get pretty cold Temps (not consistently negative 30 though). Every year should probably be fine but also depends on how much you drive. I'm not a car expert in any way (I work in medical field). Keep in mind, if you always have cold weather, I would definitely clean out your PCV hose often. The bend on the hose is poorly designed, with the moisture accumulating on the top of the hose while driving, and then when you stop driving, the cold temperatures freeze all the moisture in the pcv hose and then crank pressure builds up. So make sure you clean that out. Another option (which I did as a fail safe) was to buy a vented oil cap. I bought a AC DELCO one for $10 on Amazon. It's kind of like your back up. If the crack vases cannot leave through your PCV VALVE or PCV HOSE, then at least they can escape from the vented oil cap so that the pressure doesn't build up. Small expense for $10 but worth it.

@thommytruong29 2 жыл бұрын

@@TheNAVagator Thank you for your reply man! Did you end up cleaning PVC hose the 2nd time after 1-2 years? Did it have oil built up again? And yea, I'm planning to buy the ACDelco FC219 oil cap ASAP as well (even though it looks exactly the same as the normal cap from the picture). I may even put an oil trap can as well.

@JetFuelnSawDust 3 жыл бұрын

Thanks for the help and insight. Also, as a fellow Michigander, I really appreciate what you’re doing to help families in need by providing them with a vehicle.

@cristianblanco4485 3 жыл бұрын

Thanks to your video i was able to turn off a check engine light that said that my engine needed to be replaced,,now my car runs like new ,,thanks brother

@bricemiller2644 3 жыл бұрын

I've had this vehicle before and it leaked oil didn't know how to fix it I recently got a 2013 Equinox and want to make sure it doesn't happen again I think this video will help thank you Clay for this video

@rhondastevens312 Жыл бұрын

Sure wish you were here to work on my 2011 Equinox. Been sitting in drive way approximately 6 mths. I'm an Ole lady and can't work on it myself...Problem in Oklahoma.

@sharpcarco Жыл бұрын

Oh there’s a beautiful waterfall that I like to go swim under in Oklahoma…

@rhondastevens312 Жыл бұрын

Maybe you could fit me in your schedule lol

@sharpcarco Жыл бұрын

Actually I’ll be down there next month , Unfortunately though will be on vacation

@rhondastevens312 Жыл бұрын

Man-o-Man...that's my luck

@csrunner6296 3 жыл бұрын

Fantastic! I have 2012 equinox and after reading the tsb on this been wanting to do this but wasn’t exactly sure how, this was super helpful. Looks like I only need to buy two new tools, the fuel line thing and some angle nose pliers. Luckily no oil leaks yet. We really like the car, too bad chevy made such a crappy engine for it.

@brentspepper2087 Жыл бұрын

Thanks for this video. I just performed this yesterday and what a difference it made. My daughter took it to a local shop and they told her there was metal shavings in the engine and that the engine had been submerged in water. There was no signs of metal shavings and the moisture they were seeing was because of the plugged PCV orifice. This is a great do it yourself job.

@sharpcarco Жыл бұрын

That’s an awesome thing testimony thanks, Brent glad it helped!!! Welcome to the channel. Very happy to have you.

@franciscomarquez3033 4 жыл бұрын

This video helped me thank you so much!

@bnolascor 2 жыл бұрын

I just want to comment that I changed the spark plugs on my Equinox because the RPM needle was unstable after I changed the spark plugs the needle calmed down a bit but when I was removing everything to change the spark plugs I noticed that there was thick oil in the pcv valve I just cleaned it little and so I drove it like this and after seeing this video I went and bought a new pcv valve and replaced it but first I cleaned well the duct where the air passes to the engine and the hole where the pcv valve connects to the engine. problem solved From now on I will clean it every 6 months. Thanks for the video, it was very helpful.

@shannonsisk 2 жыл бұрын

I love the facts down below.

@mocosos0401 3 жыл бұрын

excelente video bro muy bien explicado gracias x su información Dios te bendiga

@quietclarence7998 3 жыл бұрын

Hi Clay, Would you recommend installing oil catch can inline with the PCV line running to the top of intake?

@louisseaman8455 3 жыл бұрын

It might help to take the couple of bolts that hold the AC compressor on the block so the AC lines can be more easily moved out of the way.

@bobpalmer4740 2 жыл бұрын

is it possible to just add a normal pvc valve to the manifold and connect it to the top rocker cover? and just forget that vent? if not what about drilling straight thru from that vent thru the intake and then plug that hole but that makes is so you can remove the plug and clean out the vent easier?

@neutech 3 жыл бұрын

Thanks for the vid, so what would be an actual fix to prevent this from happening?

@mikekotarba5828 3 жыл бұрын

thank you for the video

@samuelbedolla9797 2 жыл бұрын

muy buen video,super explicado,

@sbond1963 4 ай бұрын

Thank you and a question. Your video goes over cleaning out the clogged fresh air inlet part of the PVC system? If that’s the case, how is PCV pressure controlled and how is blowby gasses managed? Where is the outlet?

@larryk.8666 Жыл бұрын

Hello sir, thank you for the video. Couple quick questions... looks like these intake are pretty reasonable to purchase. Would there be benefit to just getting a new one and installing it rather than cleaning the old one? I plan to keep the equinox for many more years. Then, any thoughts on adding a catch can? Thanks!!

@toddcanipe1190 Жыл бұрын

Thank you so much for this video!! Our GMC Terrain, 2013, 2.4ltr is having this issue. There is an enormous amount of pressure felt coming from the valve cover oil filler cap after removing it. It is just way too much than should be. My Son and I are going to try cleaning the PCV port as you have demonstrated, but, I wanted to ask you if fully tearing down the hoses, high pressure gas pump, and the other things you have shown is necessary to gain access to the PCV port in the Intake manifold? The reason I ask is that we don't have all the tools you mentioned in your video and the Terrain is our only vehicle and our funds are very tight meaning I can't really go and buy them. The Uber rides are killing us financially. Is there a shorter or short cut way to do the port cleaning without doing a full tear-down and removal of the intake manifold? Thank you for any help you can provide us as we really are in a bad financial situation and we need the car at least until we can get a better vehicle. Additionally, there is oil leaking from the rear seal on the engine. It isn't an exorhorant amount, but I feel if we were to drive the car in it's present condition the seal would blow-out completely. Again, thank you for all your help and advice. Todd Canipe, 704-942-8601, todd.canipe@gmail.com.

@frankgeorge1744 4 жыл бұрын

Thank you

@renegade4719 2 жыл бұрын

Hey Thomas, I’m having issues with getting the high pressure fuel line to seal to the pump. It leaks every time I put the key in the on position (not starting it)

@littmus32ify 2 жыл бұрын

Everything installed (including a new HP fuel pump gasket w/ o-ring (o-ring broke)). Started it up, and engine shakes with check engine- P0203 code - cylinder #3 misfiring. Any idea what might be wrong? 108K miles. (New plugs at 100K). Wiring? A piece of dirt got in the fuel line and went to the fuel injector for #3? Leak? Slow acceleration. Thanks a bunch! And thanks for your earlier response. Edit: P0203-00 Cylinder 3 Injector Control Circuit with misfire (P0300-00)

@tonyabernathy9585 3 жыл бұрын

Having problems with the 2.4 Chevy equinox reduce engine power no pauls for crank sensor and cam low pressure in the fuel rail installed a new fuel pump on the gas tank. what do you think. and thank you.

@ddterry3113 5 ай бұрын

Excellent video... thank you!!

@sharpcarco 5 ай бұрын

Thank you very much welcome to the channel

@sharpcarco 5 ай бұрын

Thank you very very much welcome to the channel. I don’t know why I didn’t post the first time.

@jeremetiedtke3256 2 жыл бұрын

Very helpful video

@sharpcarco 2 жыл бұрын

Well thank you very much welcome to the channel we’re very happy to have you!!

@DEEVAH929 3 жыл бұрын

My 2014 Equinox is showing code P023F and P1255, it’s an Eco Tech and Flex Fuel. Any ideas"?

@timgephardt9448 3 жыл бұрын

Thank you for the informative video. One question though. Does the engine need to be rotated by hand or any special tools required for reinstalling the old fuel pump? It went back with some resistance which I would say is compressing of the fuel pump spring and the old oring gasket that was cut when reinstalling and now needs to be replaced. The reason I ask about the rotation of the motor is a generic Bosch high pressure fuel pump replacement video shows rotating the motor and inserting a plug that I would say makes sure the lobe on the camshaft is facing away from the roller.

@sharpcarco 3 жыл бұрын

Well the only reason you would rotate the motor is so it’s easier to put in this is a spring and cam actuated motor meaning that when the lobe is pushing out it pumps the fuel injection pump so other than you applying enough pressure to push down on the spring and insert the screws there’s really no reason why you can’t insert it at any position of the engine.

@hectorpena1119 Жыл бұрын

thank you your video is very good

@sharpcarco Жыл бұрын

I appreciate that very much Hector love having folks like you hear welcome to the channel

@jessicawaller819 2 жыл бұрын

I have 2016 equinox, stalls in reverse and it stop/light signs. Checked air box , filter smells like gas, and see white..😔 really dont need this now, only car, 3 kids and im disabled, divorced. Seems like i never catch a break😭. Thanks for this i might be able to give it a go to fix myself.

@dentxnone9815 Жыл бұрын

Is The Fuel Pressure Sensor located on The Mounting Surface Area ??

@christopheraguilar3214 Жыл бұрын

Thank you.

@sharpcarco Жыл бұрын

You're welcome!

@fernandobarrera4699 Ай бұрын

I love you video thanks chingon El vato 👍💪😎

@sharpcarco Ай бұрын

In my very limited Spanish ability, Mucho Gracias señor ….. punchy punchy Chaka Chaka 😂😂😂

@yamaahmad4469 2 жыл бұрын

Hey i have a p0171 code after replacing intake manifold also in the intake box their is fuel inside of it

@ecoaster7200 2 ай бұрын

Had oil consumption of around a half quart a week, replaced the manifold and cleaned out the port on the engine block and it's been two months without any oil consumption...I check weekly just to be sure

@sharpcarco 2 ай бұрын

That’s awesome thanks for sharing that with us. Because that is a big problem. I’m gonna do a really lengthy video on oil consumption hopefully this year.

@bogdanovichracing9138 Жыл бұрын

So the ac line doesn't have to be undone?

@joemccormick6790 3 жыл бұрын

If you remove the studs on top of the intake you don't have to remove the fuel pump, and it goes back in easier too. This was on a 2013 Equinox, just did it this afternoon.

@350Zquicksilver 2 жыл бұрын

I don't know what you mean by "studs" but I'm about to find out. I was going to remove the plenum and inspect and clean it, but changed my mind after watching this video. I may also try "TS SCI's" testing procedure first - (Owners can test the orifice very easily for blockage. While the engine is running, remove PCV tube and block the plastic fitting leading to the camshaft cover. You will hear a whistling sound. This is air being drawn past the rear seal under vacuum. You can also pull your dipstick and place your finger on the tube. You should feel a slight vacuum. This means the orifice is open.)

@mph5896 2 жыл бұрын

Yup, did the same. Also no need to pull the intake completely out. Just tip it back and inspect the hole.

@rodilloz Жыл бұрын

Yeap.

@michael931 7 ай бұрын

Is there a matching hole in the head or just the little hole in the manifold?

@genehan1597 Жыл бұрын

Hi Clay, I have 2011 Equinox 2.4L engine,could you tell me the location of EGR valve please? Fail emission test code p0405. Thank you 🙏

@christopherduncan803 3 жыл бұрын

May I suggest using an audio compressor filter to level out your audio?

@jwchondaatc7289 2 жыл бұрын

Great video Clay. I just did this to my 2013 equinox. Video helped tremendously. Question, at 6:18 in the video, what is that part? Mine doesn't have that or the wire bundle that runs up the intake at the left side of the throttle body mount. Thanks!

@sharpcarco 2 жыл бұрын

Well you would think I would know that question I went back and looked at the video I don’t normally do that but I Think that was for the emission system probably a purge solenoid of some kind can’t say for certain though. If you don’t have it it probably didn’t come with it the engine block in the cylinder head are the same from 2010 and upward but some of the emission systems are going to be different.

@walterregula6573 2 жыл бұрын

Love your videos especially the facts! Can you confirm the location of the crankshaft position sensor on the 2012 Chevy equinox 4 cyln.? and any tricks getting to it? I think it is on the backside of the engine but not 100% sure

@sharpcarco 2 жыл бұрын

The crankshaft sensor on that vehicle is located on the backside between the engine and the transmission output shaft sorry about not seeing this message sooner I greatly apologize I try to answer everyone but I get so many messages daily it’s very hard to keep up

@littmus32ify 2 жыл бұрын

Any advice how to reinstall the high pressure fuel pump cover? The holes don’t want to line up. Thx for this video.

@sharpcarco 2 жыл бұрын

Start both sides a couple of threads and then tighten them up each equally

@briangermann9158 2 жыл бұрын

Hello Clay, I'm very thankful for your videos. I do have a question, which is - I had a major fuel line leak from the high pressure pump fuel line (top side that connects to the pump) after taking the fuel line off. I'm trying to figure out why it's leaking after tightening, I didn't over tighten it and it is tight.. Is it TRUE that we have to replace this short line after removing it? If so do you know where the the best place to get it is? I've searched but can't come with anything. Thank You. B

@sharpcarco 2 жыл бұрын

Well I’ve never had one leak so what I would probably do is pull the line off completely because it’s fairly simple inspect the ends and make sure that it is seating correctly as you tighten it down. . If it has any like straight edges to it and it looks like the ball is cracked or something you will have to replace the line. I’ve never bought them before but I would assume that you can get them from the dealership rather easily since they’re always saying “they always need to be replaced” I personally never had mine replaced but I’ve had people tell me that before if they’re not Leaking I wouldn’t see any need and replacing them

@briangermann9158 2 жыл бұрын

@@sharpcarco Thank you Clay! The 3rd time I put the line back on it's no longer leaking, two thumbs up! I got a cyl. # 4 misfire code after starting her up, switched coils and now a multi misfire code, and that darn stabltrac on message center. getting ready to pull off intake man to double check everything. Thank you Clay, you saved me from spending $$$ on a unneeded part.

@brendonkeen2408 3 жыл бұрын

Only thing I'd add is to put to oil fill cap back on. Just incase anything was to fall in.

@stuartcaddick5837 11 ай бұрын

I have 2.4 ecotec when I shut it off it sounds like it has pressure build up and the engine shake

@2481derrick 3 жыл бұрын

I am having issues with slow acceleration on 2.4 ecotec and I am also seeing oil in hose that runs from engine cover to top chamber over the engine. What is my issue?

@TheNAVagator 2 жыл бұрын

did you look into this? I was having the same issue. I cleaned out the PCV system just like in this video, and it resolved the acceleration and equinox is driving like new again!

@scottmain3173 Жыл бұрын

About what mileage does this issue develop?

@appalachiansheds2898 Жыл бұрын

Another thing to help is take off valve cover and drill it out thats another reason for these burning oil cause it gets trapped and cannot leak back down thats one of the tsa's on these engines if you dont want to do that you can buy the upgraded valve cover

@bomark2002 9 ай бұрын

Where would you drill the holes in the valve cover?

@briangermann9158 2 жыл бұрын

Hello Clay, just took my exhaust manifold off and there is a screen down in there that appears to be (SUPRA) Plugged that's like a whole other level above Super Plugged, I don't see how anything was getting through there. Wow. This could explain my cracked Exhaust Manifold.

@sharpcarco 2 жыл бұрын

That’s quite a common occurrence with these things pieces of crap if you ask me

@skillzcorly2714 6 ай бұрын

How do you replace pvc on a 2018 equinox… nobody can tell me how to get the screw out?

@michaelmcguinness6756 3 жыл бұрын

Dude, you’re trying to do a good thing here (intro is freaking great) but for many of us with attention deficit and related-combined OCD issues it is absolutely impossible to follow your instructions and read (and comprehend) the bottom-of-screen factoids at the same time. Can you print a version without the distractions? If not, I still appreciate the help you provide with these videos. Thank you.

@sharpcarco 3 жыл бұрын

That’s the nicest way anybody has ever put that, So I greatly appreciate the time you trying to be nice I’m sure you’ve looked at KZfaq several times Michael and I’m sure there’s been several times that you watch the video fast forward to the part that you’re looking for watch that part then turn the video off and never think about it ever again, i’ve personally done that exact same thing dozens of times until I started making KZfaq videos. Then I realized what happens to the producer of that video it kills his channel algorithm. So I certainly can understand being able to pay attention but what it does is it makes you watch the fact toyed‘s and then go back and rewatch the program. I very much enjoy the facts it makes editing the video that much better. Editing is the worst part of making any video it’s very time consuming and extremely boring So I do it for the exact reason you’re telling me I shouldn’t do it but KZfaq videos only make about 2/10 of a cent per view and I don’t put them in there on every single video. Just the ones that I believe people will skip a crossed, and we’re still in the testing stage so it’s very possible that we may not do it any longer bought they are fun and help you out in possible awkward social situations. Once again I do greatly appreciate the kind words it’s just difficult at this point to see if it actually works or not like I said they’re not every single video

@briangermann9158 2 жыл бұрын

Hello Clay, I did a Ohms test on the fuel injectors in this 2012 Equinox 2.4l ecotec. I got a steady 1.6 reading on all 4. I thought I would check them since I already had them out, still trying to diagnosis a #4 cylinder misfire code P0304 . Does 1.6 Ohms sound right to you on these fuel injectors? Thank you Clay...

@sharpcarco 2 жыл бұрын

Sounds right , not 100 on it , but try Compression test ?

@briangermann9158 2 жыл бұрын

@@sharpcarco Hello Clay, My compression tester rental comes in Monday, I wanted to add, I've been looking at some videos on another common problem with these 2.4l ecotecs which is (cracked exhaust manifolds), so I thought well, while I,m waiting on the Compression tester I would take the heat sheild off and check out mine, and sure enough there's a crack not 1 but 2. Not as bad as some I've seen which are so bad they are removed in two pieces. So I'll be replacing that too. Always, Thank you Clay for your sharing.

@jacobringler5905 4 жыл бұрын

u have a typo in your video description by the way but i love this video might be doing this to mine her in the upcoming weeks i am having that problem as well

@sharpcarco 4 жыл бұрын

What was the typo Jacob?

@jacobringler5905 4 жыл бұрын

@@sharpcarco If you ever had to remove your intake off your 2.4 eco-tech this video is going to show you how to not and bolt remove it along with showing you how to The NOT should be NUT unless ur telling us how not to do the job

@sharpcarco 4 жыл бұрын

🤔😂 valid points sir lol

@sharpcarco 4 жыл бұрын

By the way Jacob thank you very much for noticing that

@jasoncusati9537 Жыл бұрын

Clay, are you able to tell me or show :) how to do this procedure on a 3.0? I believe the valve is in the back bank of the motor, but I can't find any digrams for it. Thanks!

@sharpcarco Жыл бұрын

Absolutely I would get one one of these days but unfortunately I don’t have one so I can’t do it and I’ve never done it before but I’m sure it’s fairly easy.

@justinniester7228 Жыл бұрын

I followed step by step and after firing it back up it has a mis. Not sure of what it could be.

@Blacklight72 3 жыл бұрын

Thanks for the advice Clay, I solved the big problems. I put in new intake/exhaust solenoids, and a new throttle body, and everything smoothed out. I do have one question though: as someone familiar with the Equinox, what could be causing it to burn so much gas? I got about 277 miles on my last tank. Are there any possible solutions? I would appreciate any advice on this.

@notquiteordinary 2 жыл бұрын

Pretty sure they come from the factory with incorrectly sized piston rings

@RUGGLIFE 3 жыл бұрын

When I crack open the fuel line to replace it the fuel keeps pouring out is there some way to stop that or is it just draining what in the fuel rail?

@mjkirk12 3 жыл бұрын

Try and disconnect battery or remove fuel pump fuse to keep gas tank fuel pump from pressurizing system.

@briangermann9158 2 жыл бұрын

Hello Clay, Brian here again with another question because you obviously know 2.4l ecotec engines. I started out just replacing the Timing chain on my sister's 2012 Equinox 2.4 l then both cam solenoids, then did the intake removal to replace gaskets. Still ran rough after 5 seconds of idle. I removed the valve cover today and found a lake of oil/fuel just sitting in the back on top of head under the exhaust cam. Any advise on this? I've spent more time in front of my computer screen reading comments/advise and research on GM flaws (surprised it's still legal for them to design engines) trying to figure this engine out than I ever have. My eyes are exhausted lol

@sharpcarco 2 жыл бұрын

Usually that’s going to be the PCV valve is plugged like I show you in the video that you’re talking about. I don’t know everything about these engines but I do know that the problem that you’re describing could also be related to your cam bearing clearance and that’s probably the issue with yours. It’s possible it could be a PCV valve problem but if it’s not that it’s definitely Cam bearings

@briangermann9158 2 жыл бұрын

@@sharpcarco Thank you Clay, I did like you showed/said cleaning out that PCV hole the first time I took the Intake off, I was actually happy to see it was plugged, because it meant time well spent Thank you! I also noticed oil sitting in the head opening where the PCV hole aligns up with the head. I don't understand why there would be oil there. also to add when I replaced the Cam Phasers I noticed a gap on the Exhaust Camshaft (Between the passenger side of the Camshaft and the Passenger far side Cam Bearing and was able to move the Exhaust Cam to no longer have a gap. So with that being said I'm with you on what you are saying. I wish I worked with you.

@blancadurazo2994 Жыл бұрын

Hello I have a 2014 equinox that has been stalling on me for about 3 months. Have replaces fuel pump, sensors, acceleration petal etc.. my equinox stills continues with the same issues. We check the intake and it super dirty. They mentioned that it could be carpartments that close and open inside the intake that ain’t working very well.

@shimba2506 Жыл бұрын

did you replace the solnoids?

@alessandroarellano9475 3 жыл бұрын

When replacing high pressure fuel pump is a tool needed to measure cam position or can it just be reinstalled?

@sharpcarco 3 жыл бұрын

The cam position doesn’t make any difference Because it’s a mechanical pump

@jwchondaatc7289 2 жыл бұрын

Thank you for the great video! I am currently doing this to my Equinox. Just for the extra security, I put the cam in the correct position. No need to remove tire or splash shield or have someone else there with you. Going between the belt and splash guard from the top of the engine bay, I used an open ended 21mm wrench in my left hand and used my right index to see which way the roller was going. When I felt the roller cup was all the way in, I used a sharpie and marked where the roller cup was inside the housing. Rotated the engine a couple more times to verify my marks, still using my finger for pressure. Easier for me to see the movement instead of feeling for it. Takes about 5 minutes.

@thommytruong29 2 жыл бұрын

Hi. I live in a cold climate weather (usually -30 C in Northwestern Ontario winter). How often do you think I should do this maintenance? I'm planning to get it done once a year, but not sure that would be enough.

@sharpcarco 2 жыл бұрын

It depends on your driving habits. I’ve never really measured it that closely. So I don’t really have any recommendations for that.

@jimandnancymcoil Жыл бұрын

Hey Tom, Your Big problem is that cheap black plastic 90 degree fitting that goes into the air box, from the valve cover, the oily misty vapor turns to goop that freezes, Blowing out your rear main seal? I put a 3/8 brass barbed fitting there, ran a 3/8 hose from new fitting to a cheap air/oil separator , $10.- from Home Depot, to the valve cover, just remember the dirty air is coming from the valve cover, run that hose into the IN arrow on the air /oil catch can, (stuff a SS scouring pad into catch can) then to the new 3/8 barbed fitting on air box? I also used a Vet vented oil fill cap from Napa, $12.-? It's a cheap, quick fix, to prevent disaster? Heck, the vented oil cap, will prevent the rear main seal from letting go? PS, I went further; I installed a K&N Intake Kit, I flushed the engine, & soaked the rings overnight with Gumont W/PEA, Great for the Carbon on the rings? I have a 13 Terrain, problem started at 80K, now have 108K ? I love the car, if & when it Blows, I will not get a crate motor from GM, Same problems all over again? There are a 1/2 dozen reputable engine rebuilders out there that have fixed & improved everything that is wrong with this engine! Good Luck!

@mph5896 2 жыл бұрын

To much work. I had one cleaned out in about 45 min today. No need to unbolt the fuel pump, just pull off the bracket and insulator and low pressure fuel line. Remove the 1 stud on the right side of the intake with 5mm socket. Intake will slide off and tip forward. No need to pull the intake entirely out, just check the pcv hole with the intake tilted back.

@TheZehnerhjk Жыл бұрын

What are you prying on??

@marcusgomes9580 3 жыл бұрын

I have a 2011 equinox Ls. I have replaced the intake/exhaust solenoids, throttle body, spark plugs, coils and the high pressure fuel pump. But it is still going into limp mode and at red lights/stop signs it will idle very rough. Current codes are P228C, P163A and P0171. Any ideas why it’s still acting up? Any suggestions would help. Thanks!

@sharpcarco 3 жыл бұрын

Well my best guess would be did it has low oil pressure Which is then causing the cam phasers to turn on and off Which causes Erratic engine operation

@edwardberry7983 2 жыл бұрын

Clean your EGR valve

@amazonpapokpullo9468 Жыл бұрын

I clean my pcb in the same way that the video and open little bit more the hole with small drill now my engine is whistle. I don't know if for this reason or for clean the 4 admision.

@sharpcarco Жыл бұрын

Yeah I don’t know if I mentioned it in the video but a while after making this video Frank told me never to open that thing up because it will do exactly what you described I thought I put it in the video but I could be mistaken…. Sorry to hear that but that is your problem

@mattthompson9921 3 жыл бұрын

Clay way I got a 2013 equinox ecotec 2.4l at startup it stalls but will crank right back up also there is a knocking noise coming from fuel tank area occasionally

@sharpcarco 3 жыл бұрын

Well you probably have two different problems and engine problem and an exhaust problem would be my best guess from your description

@Rich-ew9bv 3 жыл бұрын

How do you relieve the fuel pressure you pointed to what looks like a relief valve do I just depress that valve?

@sharpcarco 3 жыл бұрын

Crack the line open, If you’re worried about it getting on the ground put the catch pan underneath the vehicle crack it open gently and it will trickle out crack it open quickly and it will spray out quickly and last for about two seconds, And yes you could press that valve down with a l little screwdriver

@Rich-ew9bv 3 жыл бұрын

@@sharpcarco thanks. Yeah I pressed the valve and cracked the line. I didn't have to take the pump completely off had to get it out of the way to get to a cam sensor. How do those disconnects work I tried and gave up.

@sharpcarco 3 жыл бұрын

Sorry can’t remember for sure if they’re the type you stick a little tool inside or if there are the pressure release ones

@adangutierrez7162 3 жыл бұрын

Why does my 2014 chevy 2.4 liter equinox LT make raterling noise when starting in the morning?

@sharpcarco 3 жыл бұрын

More than likely you have a broken upper timing chain guide it’s very common

@mph5896 2 жыл бұрын

Yeah, timing chain guide. Fix it before it turns into a serious problem.

@jesuslara9597 2 жыл бұрын

What is the name of the blue stopper at minute 9:03?

@albinmiranda8930 3 жыл бұрын

Friend I already made the hole in mine. But now there is a noise I do not know if it is from the hole? Either it will be very big, or very small, or is the throttle body strange. how big i have to doe the hole? "that when I take out the dip stick the noise goes away but the speed goes up higher, has the same thing happened to you? Or any idea?

@ramonrodriguez6480 Жыл бұрын

Replace the valve cover, they clog as well, I did the whole a little bit bigger but the sound is for the valve cover clogged, $75 in Amazon

@nelsongarcia5521 3 жыл бұрын

Hello, how do you remove intake manifold on 2011 malibu lt 2.4l

@sharpcarco 3 жыл бұрын

I’m sorry I do not have video of that and I unfortunately do not know off the top of my head.

@nelsongarcia5521 3 жыл бұрын

@@sharpcarco hey Clay do I need to drain coolant before I remove intake manifold 2011 malibu lt 2.4l

@nicholasthompson5385 Жыл бұрын

We have one and have changed out plugs and more need help we only have 1 car in our fall of four and my wife uses it for work ever day

@rotwiler7674 3 жыл бұрын

I added a GM vented oil cap for extra reassurance.

@sharpcarco 3 жыл бұрын

That’s really cool thanks for sharing

@timh36 2 жыл бұрын

Do you remember the part # for that? I'm interested in doing that also

@sharpcarco 2 жыл бұрын

Here ya go…. The Amazon link for it amzn.to/3vsPuqR

@badpapasmurf5981 3 жыл бұрын

Great video Clay, very helpful. Now that I've cleaned out the PCV and removed the bolt I I off in the block( thank goodness part was still sticking out) upon reinstalling everything, when I go to crank the car it acts like it wants to start but just can't. Because I depressurized the high pressure fuel pump, will it take a bit for it to get back up to the engine? I'll go and triple check that I've reconnected all the sensors. Thanks.

@badpapasmurf5981 3 жыл бұрын

Just me being impatient, all the sensors checked out good, and eventually the fuel made its way to the engine. Thanks again Clay, you're a lifesaver.

@sharpcarco 3 жыл бұрын

So you got it started up? I hope that’s the case I would certainly think so if everything was re-assembled correctly if you have any more questions it’s easier to get them answered quicker on my facebook page clays Ac and Auto Repair God bless have a great day thank you for the kind words

@markfiorella7447 4 жыл бұрын

will using moble1 keep the carbon down and what does this service cost

@sharpcarco 4 жыл бұрын

The service itself shouldn’t cost that much depends on what part of the country you’re in but should only take about 2 to 3 hours. At the most for a novice Mechanic there’s nothing to technical about it. Personally I’m not gonna give my advice on different types of oil because I have opinions that will not go with what most people think. Hope you can respect my decision not to make a fool of myself

@tssci6774 4 жыл бұрын

You can reduce the carbon by using a high quality synthetic with a low volatility score. API minimum is 15%. Look for 100% synthetic oils which resists breakdown and has a volatility score of 7% or less. Also these GDI engines are known for higher than normal fuel dilution and soot which contributes much to the wear and other problems. Ignore the OLM and stick to a 3k interval. I have seen in many engines the oil will shear back to a 20 weight in as little as 2k miles.

@michaelsera746 Жыл бұрын

Other than you being funny, your video are informative... I see lots of videos on clean out procedure. Would a new manifold be recommended and is a new OEM or aftermarket intake possibly have an improved design correcting the issue? thx

@sharpcarco Жыл бұрын

It probably wouldn’t hurt because of the amount of carbon that builds up inside them. I personally never done it that way, so I can’t see what the results would be, but I would assume that it would not hurt anything. But your pocketbook little bit.

@michaelsera746 Жыл бұрын

@@sharpcarco Just read a youtube poster using a vented oil fill cap FC219 as a temp solution that have actually stopped (not corrected) their previous oil leak caused by crankcase pressure. If you look at the comments on Amazon for this cap it is encouraging. Maybe I can get thru the next few months on NJ winter until i get a chance to do the work. Thoughts.

@mcchatman6226 3 жыл бұрын

hey clay.can a pvc line be add to the oil cap

@TheNAVagator 2 жыл бұрын

There are videos of people doing this modification. They also add another PCV line to the intake manifold as well

@melvinthomasjr.45 4 жыл бұрын

I have to thank you Clay! I think that I'm getting my problem resolved with the 2013 Equinox. I removed and cleaned the throttle body and the PCV intake. The power and acceleration is back, but now when I stop it vibrates while idling. Any idea how I can address this? Thanks again.

@sharpcarco 3 жыл бұрын

I suppose that vibration could be coming from a lot of different things if it wasn’t vibrating before I would double check my work and see if that’s a possibility. Sorry I really wouldn’t have a clue unless something else is going wrong

@tssci6774 2 жыл бұрын

@@sharpcarco Go to the Chevy Equinox Forum on FB, they can probably help you.

@DJR5280 2 жыл бұрын

Does the car smooth out if you put it in idle ?

@countdowntomidnight692 3 жыл бұрын

I have a 2012 2.4 ecotec equinox, it's dieseling for a couple seconds after I turn it off, and there is a fuel smell on the oil dipstick. Any ideas? I figured either High pressure fuel pump or fuel injectors, im still learning about this stuff lol.

@miguelc236 3 жыл бұрын

Did you figure out the problem with your vehicle?

@countdowntomidnight692 3 жыл бұрын

@@miguelc236 Bad Mass Air Flow sensor and faulty fuel injector

@miguelc236 3 жыл бұрын

Thanks

@taylorbranch1427 3 жыл бұрын

I'm having the same issue. Took our equinox to the dealership for a warranty fix on the oil consumption. As soon as we got it back the car would diesel like crazy and the whole car would shake. Took it back in and they said it was the high pressure fuel pump and quoted me 1000 to replace it. (Obviously it wasn't their fault so it's not under warranty)

@QuinnStan 4 жыл бұрын

When replacing the high pressure fuel pump should I also be replacing the fuel line too? Thanks

@sharpcarco 4 жыл бұрын

We never do but it is recommended

@Rick-ci5hj 2 жыл бұрын

thats a LOT of stuff to remove for routine maintenance surely there must be an easier way to clear that little hole ...

@pedritoc.c.t.665 3 жыл бұрын

Bro. My fuel line after remplacing the the hp fuel pump it drips gasoline on the treat

@edensnicolas9593 3 жыл бұрын

I have the same vehicle and I getting reduce engine power and service stabili track. The car has no power and got a code p0090, p0092, p0420 with no check engine light I’m planning to Change the high fuel pressure pump. Anyone experience something similar? Or as a fix

@shadmeyer7791 3 ай бұрын

Catch CAN!!! Simple way to stop the bad fluids entering engine .

@moustaphacheva3757 2 ай бұрын

Do you have p0172 code ?

@mrstutz3333 2 жыл бұрын

I've got oil in the throttle intake, pcv plug, and air box. What could be causing this?

@sharpcarco 2 жыл бұрын

I would have to think it would be a plugged PCV valve.

@charliewilliams3622 2 жыл бұрын

i drilled that hole out a little bigger... when I put it back together after about 15 minutes you could hear a whining sound. If I take the oil cap off it quits or if I pull the oil dipstick out it quits whining..... I took it back apart and all of the passageways are clear.... do you have any suggestions

@sharpcarco 2 жыл бұрын

Well I mentioned in the video you can never drill them out and you have to be careful with making it bigger you need to replace the intake. Sorry to say

@charliewilliams3622 2 жыл бұрын

@@sharpcarco thank you very much for your quick reply...is there 2 vacuum lines near the throttle body that supply the brake booster...the bottom one is bigger then the top one.....the top one has a sensor right beside it...do you have a video that kind of explains that operation...im curious and like to try to understand how it works..thank you so much for your reply

@sharpcarco 2 жыл бұрын

No I sorry I do not have one and if I had an escape or a terrain in my possession I could show you how it works. And I would definitely explain it to you if I could remember exactly how it worked but I will keep that in mind next time. I’ve got one of them sorry couldn’t help you with that one this time

@charliewilliams3622 2 жыл бұрын

@@sharpcarco thank you for your reply...im not doubting your advice by no means....i just dont understand why drilling that hole bigger would cause the noise...i read where some ecotecs was making same noise due to a clogged orfice in that black platic air intake...i do plan on replacing or platic welding hole shut then drilling correct size hole...i have to find out correct size this time lol

@TheSalohcinekalb 3 жыл бұрын

How do you relieve the pressure from the pump?

@sharpcarco 3 жыл бұрын

I personally just crack the line lose.

@TheNAVagator 2 жыл бұрын

Use a 17mm wrench and loosen the line just below the fuel pump.

@StephanieLammers-uc5pb 9 ай бұрын

I have a chevy equinox, she's my only vehicle, she has reached 344, 670 and I smelling fuel when I remove the cover she doesn't leak fluid at this point she just eats it and I love my car she is my only life line and need someone to give me advice 😢

@karatejoejr 2 жыл бұрын

Hi Clay so my car is slow in accelerating when I hit the pedal it jump up to 3000rpm before it picks up speed. Could this be the fuel pressure pump or the pcv. Any help would be appreciated

@sharpcarco 2 жыл бұрын

Well I can’t say for certain, Do you think it’s a transmission issue?

@karatejoejr 2 жыл бұрын

@@sharpcarco Thank you

@edwardberry7983 2 жыл бұрын

Clean your EGR valve

@karatejoejr 2 жыл бұрын

The transmission is not slipping it just does not accelerate fast with out high rpm.

@karatejoejr 2 жыл бұрын

Also the 2012 does not have a EGR Valve.

@tonyasmith8333 3 жыл бұрын

I am thinking this is my 2014 Chevy Equinox's problem; however, don't have the tools to do this myself. About how much should I expect to pay to have my PCV cleaned?

@sharpcarco 3 жыл бұрын

Maybe 200 just depends where you take it dealer is going to be the most expensive

@karatejoejr 2 жыл бұрын

Can you make the pcv hole bigger on the in take manifold ???

@sharpcarco 2 жыл бұрын

No do not do that.

@karatejoejr 2 жыл бұрын

@@sharpcarco what would happen if the whole where to be made bigger

@karatejoejr 2 жыл бұрын

@@sharpcarco Thank you

@sharpcarco 2 жыл бұрын

It creates all sorts of weird things I’ve never done it but a friend of mine told me to never do it that does them all the time and I don’t remember what he said happens

@karatejoejr 2 жыл бұрын

@@sharpcarco someone added another pcv valve from intake manifold to oil cap is this a good idea. Is 2 better then one

@roberthall1287 2 жыл бұрын

Do you work on customer cars? If so how would one go about getting a quote for repairs?

@sharpcarco 2 жыл бұрын

Generally I don’t work on customers cars. I would recommend reaching out to me on clays ac and Auto Repair on Facebook it’s easier for me to have conversations there. I can listen to your concerns. And possibly give you some directions.

@rodrigueze59 2 жыл бұрын

What do you mean by shoe coming off?

@sharpcarco 2 жыл бұрын

The only thing I could think of that you were referring to is the shoe that is on the end of the high-pressure fuel pump.

@Packer1290 3 жыл бұрын

Is the symptom actually oil leaking on the driveway or just oil consumption?

@TheNAVagator 2 жыл бұрын

Its oil being dumped into the intake manifold and into the air box. You generally wont see oil being burned or oil on the floor until the pressure builds up enough to blow a gasket or ruin your engine, which will happen over time if you dont get this taken care of

@Packer1290 2 жыл бұрын

@@TheNAVagatorSad Update. This video was a warning and I ignored it. Since I posted this, my rear main seal blew out. Lilkely for exactly this reason. EXpensive fix as they had to pull the engine.

@TheNAVagator 2 жыл бұрын

@@Packer1290 oh no! I'm sorry to hear that! Do you mind me asking how much people were asking to fix it? My guess would be between 3k and 5k? I hope you moved onto a better vehicle maybe?

@sharpcarco 2 жыл бұрын

@ Blue Mustang sorry I didn’t see your post 10 months ago that’s generally why I recommend people message me through my Facebook. And I’m very sorry to hear that that happened to you. @Navneet Khaira Thank you very much for helping folks out I love to see that and I greatly appreciate folks like you for helping everybody else if we all help one another a little bit we would all be in a much better place

@TheNAVagator 2 жыл бұрын

@@sharpcarco not a problem! Just hope that others can act on issues like this before it becomes a bigger issue!

@sharpcarco 2 жыл бұрын

⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Thank You! Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/3wbql3i CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3w3oyP3 EPAUTO 45 Pieces 3/8" Drive Socket Set with 72-Tooth Pear Head Ratchet: amzn.to/3KeUhjW Gumout 800002231 Carb and Choke Cleaner, 14 oz.: amzn.to/3N8pasq CRAFTSMAN Pliers, 6-pc. Mini Set with Pouch (CMHT81716): amzn.to/3PbgEdI AUPREX 7PCS AC Fuel Line Disconnect Tool Set for Most Ford/GM/Chrysler/Mazda,Includes 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch: amzn.to/3whnfL6