Chief Air Hammer Test Head To Head VS Snap On

Рет қаралды 65,270

Күн бұрын

#Chief #harborfreight #Snapon
Head to head comparison and test with the Chief air hammer from Harbor Freight VS the Snap On. Can a $120 tool compete with a $550 tool? Let's Find Out!
Thanks for watching ! I truly appreciate each and every view we get on our videos. Your support and comments are truly amazing. You guys that are subscribed, are awesome, thanks for giving us your time to watch the videos.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime !
Follow me on Instagram: KoonTrucking and Diesel Medic we always post interest and funny content plus some cool pics we take of jobs and new tools. TikTok: Koon Trucking
If you are interested in Koon Trucking or Diesel Medic shirts or stickers teespring.com/stores/diesel-m...
Here are some of my favorite links to get some awesome tools and coupon and discount codes to save you some money.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
For some of my favorite tools click the link here: www.amazon.com/shop/koontrucking
Bolster Bolt Organizer 10% Off use KoonTruck10 boltster.com/?ref=baqhdrdkkss
That code will even work on Amazon amzn.to/3fV9TKI
www.gripty.com code KOON10 for 10% off
www.motivxtools.com use code KOON for 10% off entire order
Olsa Tools: Use the code KOON to save 10% off your purchases rebrand.ly/KOON
OTR Performance a cheap and effective way to clear codes and force a regen. Use this link and reference code: CKoon to save 5% off
otrperformance.com/?ref=claykoon this is a owner ops dream!
Rinse Kit rinsekit.com/?rfsn=4227393.66...
Check out www.vampiretools.com and use the code KOON15 and save 15% off your entire purchase plus free shipping in the Cont. US
LunchEaze luncheaze.com/?refer=68 $5 off purchase
Type E Marking Paste markingpaste.com/products/typ...
Use Code CLAYKOON for 10% off your purchase
Tribus Tools: bit.ly/2MalUQ0 use code: koontrucking save 5% plus free shipping
Wera Screwdrivers and other awesome German Tools: www.kctoolco.com/?rfsn=293179...
Capri Tools Work Light: 620 Lumens of awesome: www.amazon.com/gp/product/B07...
Tekton 1/4” socket set www.amazon.com/gp/product/B07...
Grey Pneumatic Duo-Socket Set Metric Master Set. This is an awesome set can be used on a ratchet or impact!! www.amazon.com/gp/product/B00...
Lang Tools Master Feeler Gauges:
www.amazon.com/gp/product/B00...
Gearwrench Bolt Biter Set 👍🏻 www.amazon.com/gp/product/B07...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light, super bright. My favorite magnetic light)
www.amazon.com/gp/product/B01...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com/gp/product/B00...
Streamlight Stylus Pro Rechargeable Flashlight:
www.amazon.com/gp/product/B00...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com/gp/product/B00...
Gearwrench Brake Reset Tools (Drum Brakes): www.amazon.com/gp/product/B00...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow our Diesel Medic channel / @dieselmedic5673

Пікірлер: 258

@EVILVIKTOR 3 жыл бұрын

Contact Project Farm. He'll make a test jig for it.

@MatthewScott 3 жыл бұрын

No doubt

@9000yugioh 3 жыл бұрын

Honestly project farm has the BEST comparison videos, no one can say the opposite

@ortalionowywiesaw9455 2 жыл бұрын

Torque Test Channel kzfaq.info/get/bejne/htuFmql9zbWwZ40.html

@jeremyelliott7094 2 жыл бұрын

@@ortalionowywiesaw9455 yes! Also they revealed that the chief is made in same plant that the Mac Airhammer is only difference is trigger mechanism

@Mtg_MoBrocks 3 жыл бұрын

Clay find someone who needs a rear wheel bearing done on a Ford Explorer. That will be a real test for these air hammers lol

@joshmacdougall3360 3 жыл бұрын

So true

@TrudeauCallsMePapi 3 жыл бұрын

Those are torturous. The salt of eastern canadian winters certainly dont help either!

@CJGeibe 3 жыл бұрын

I know a way better way than an air hammer for those

@Mtg_MoBrocks 3 жыл бұрын

@@CJGeibe yeah recommend a whole Knuckle lol

@CJGeibe 3 жыл бұрын

Lol nope, find my channel. Ill make a video qnd upload it next one i get in

@zbrown362 3 жыл бұрын

Use it for 6 months and give us an update how you like compared to the snap on that’s a real test I would say

@anon58973 3 жыл бұрын

Not much to go wrong on an air hammer bud. Even a soft hammer is good enough for awhile. Not a harbor freight shill, don't own this hammer, and plenty disappointed with a decent amount of dumb tools from harbor freight. Basically comes down to moisture removal and oiling before putting a tool away. Maybe he more $ is less sensitive to proper use, but this is a great deal imo. May be disappointed in time for semi-occasional-hobbyist use after I get one for honda ball joint and bearing removal, but I bet it would be quite good for quite a while. t.buys american whenever possible, as in +200% cost over chine shit for an "I need it for this task, may need it in the future, so why not". I do have several other chief tools, purchased for specific projects, that sit until I need them again (infrequently) and they're just fine.

@zbrown362 3 жыл бұрын

@@anon58973 well I’ve had my snap on air hammer rebuilt a couple times but I use it every day so just cause it’s a simple design doesn’t mean it doesn’t wear out if it wears out in 6 months it ain’t worth it to me I can get a few years out of my snappy and before it needs a rebuild and the rebuild is cheap and fast, I doubt your gonna walk into the store get them to rebuild the chief or give you a kit to do it yourself. I think your thinking everyone is a hobbiest which is not the case for me hence why I said use for 6 months then let me know how it is

@anon58973 3 жыл бұрын

@@zbrown362 thanks zack, your probably thinging everyone is a pro user. So let's meet in the middle, chief prolly a great choice for amateurs snap-on for the prose like you.

@Lukey741 3 жыл бұрын

I have that snap on air hammer and it is hands down my favorite tool in my box. When nothing else works, I grab the snappy. Love that vids Clay keep it up❤️

@articbaer116 3 жыл бұрын

Thanks Clay. I have bought one as I am DIY kinda guy and can’t justify paying $$$ for something I might use on occasion. I have been pretty happy with the performance of the Chief. Keep ip the great vids.

@jakepeeler1535 3 жыл бұрын

If you really want to give it a good torture test, go to the closest concrete plant, and let the drivers clean the mixer trucks with them.

@bigrigtruckrepairmobileser2546 3 жыл бұрын

Answers my questions thanks Clay. Thought about a big nasty but the chuck shank is different & I've wondered about that cheif considering it's from Harbor freight. But wow, for the money I don't think you'd go wrong

@ajp2811 2 жыл бұрын

I had the chief long barrel and I just returned it today. I had 2 of them in just over a year. It hits hard but after 8 months both just stopped working. So I went to matcos newest long barrel.

@hamilton5071 3 жыл бұрын

Awesome. I got the Chief air hammer about 2 months ago and have used it almost daily since. Working in Wisconsin it gets put through its paces. Hasnt been stopped by a seized in hub assembly or brake rotor so far!

@KoonTrucking 3 жыл бұрын

That’s good to know ! I’m impressed with it

@hamilton5071 3 жыл бұрын

I did pay the extra $15 or whatever it was for the extended warranty in case i have any issues but so far its been great.

@G5Hohn Жыл бұрын

I just got the Chief hammer. It broke two different chisels the first time I used it. It’s a beast, it should probably not be on the .401 shank, but should be .498 instead.😊

@ericracette9716 3 жыл бұрын

This was my idea ! for the price i guess you cant go wrong. I have the mac long barrel and compared to my buddys snap on it hits a little harder and less vibration it has like a little air cushion or something like that . Anyways great video !!

@spiritualhouse2 3 жыл бұрын

I've had my 3050 for 18-19 years and have beat the tar out of ...finally had to replace a trigger seal last year

@oakcliffpride 3 жыл бұрын

I had a PH2052 since 1997 it still strong as ever. I've so used many times for the real test was losesening ball joint using a pickle of fork and low speed control to loosen striped dome shape allen bolts !! Precion Speed control is key to nothing beats a snap on !!

@jamesu 3 жыл бұрын

Thanks for the video Clay

@MichiganMechanic 3 жыл бұрын

Been waiting for a reliable source to review one of these thanks for the content!!

@KoonTrucking 3 жыл бұрын

It’s really hard to test an air hammer because there’s not a real good way of showing how hard or fast it hits. Like this video the snap on had a fresh edge on a new chisel and threads to help hold it on the bolt. The Chief fought a blunt edge and no threads ..... but it shows it can compete even with those against it.

@benjaminblackmon9130 3 жыл бұрын

I’ve always had good luck with Sioux air tools, they’re an excellent value for a very well made tool.

@creigjordan2322 2 жыл бұрын

Guess who purchased Sioux some years back? . . . Snap-On.

@85jmccoy 3 жыл бұрын

The matco air hammer is the shiznit..... I have that same snappy air hammer and my coworkers matco air hammer always out performs it.....I'll be traiding it soon. I'd also like a big nasty....

@lovetolearn5253 3 жыл бұрын

I to would like to own a big nasty. Astro tools are having a giveaway for a custom big nasty (well thier calling it Thor's hammer). Look at south main autos last video for details. I know i entered to win.

@85jmccoy 3 жыл бұрын

@@lovetolearn5253 yeah I saw that, I've followed Eric o for a long time now...he is a great mechanic and just a good dude in general And I've learned alot from watching his videos...after tech school and being in the field....

@upnorth5465 3 жыл бұрын

+1 for the new Matco air hammer. It's worth every penny. Got mine in orange!

@jessemccartney3191 3 жыл бұрын

Great video as always Clay!

@mytesttickles9355 3 ай бұрын

So yeah, it’s definitely worth it. Thanks for the video. I just need to break fan clutches. 😂😂

@dakotajohnson2182 3 жыл бұрын

Impressed so far, interested to see how it holds up in the long run. For $129.99 hard to argue not picking it up.

@audinthusiast3750 2 жыл бұрын

Been using it for several months, holds up great I have been abusing it. The only issue is the threads keep coming out from vibration so as soon as you buy it loosen all the threads put threadlocker and tighten it down and you will be golden

@wendycharles4777 3 жыл бұрын

That's nice chief tool review is cool

@oldman3388 3 жыл бұрын

Great video I have a buddy that has a earth quake impact that is like 8 years old and it will not die rusted hub bolts do not faze it. Like you said HF is stepping up there game. 🔧🔧🔧🔧

@housseinahmed6240 3 жыл бұрын

I have a earthquake xt I’ve had it for 2 years and beat the hell out of it. I leave it outside In the rain and still works as good as new except the throttle on the trigger doesn’t work the best.I’ve taken it apart and you can tell it’s very cheaply made but it holds up.

@wftseriously6694 3 жыл бұрын

Cool video as usual. I've been thinking about replacing my old IR air hammer, it's got a lot of miles on it. This chief might be a good option

@KoonTrucking 3 жыл бұрын

That’s what I am replacing with this one. It’s gotten pretty weak but it’s also not been cared for very well either

@gregcothrum4045 3 жыл бұрын

Great video have a great one and stay safe 👍

@David.. 3 жыл бұрын

11:25 sounds like someone had gas station burritos for lunch.

@KoonTrucking 3 жыл бұрын

It be like that sometimes ! 🙄

@jimhaines8370 3 жыл бұрын

I have a CP 714 for light duty 401. shank type work witch is for precision work when I need something to give up and move I get out my 498 shank air hammer which is a CP717 and an ASTRO 4980. They make things happen.

@nosliwttam77 3 жыл бұрын

Wow, my second air hammer video today. If I don't win the Astro, I might have to pick up one of these. 👍

@bb2status 3 жыл бұрын

I use the Chief air hammer professionally and it's a absolute beast! I also own the Chief reversible cut-off tool and it's a beast too lol!! You can also still use the 20% coupon on the Chief line.

@nikkapubess3349 Жыл бұрын

You're the reason why America will never be great again. Thanks for giving money to China's military.

@realsaxual2357 Жыл бұрын

@@nikkapubess3349are you dumb? If you have an issue with what people are able to buy write to congress not a consumer. This tool is less than half the price with identical internals

@cardo1111 Жыл бұрын

Good honest comparison vid.

@upnorth5465 3 жыл бұрын

I've had that new Matco air hammer for about 4 months now. It is by far my favorite out of any I've owned/tried. It has awesome trigger control and hits whicked hard for a 401 shank. It also feels great in the hand and i can't get enough of that Matco orange!

@robertpadilla9457 3 жыл бұрын

We were trying to drive out kingpins from the forklift at work... using heat and good old hammer and punch, wasn't budging those kingpins... I recommend the chief air hammer to the boss man so he sent me to go grab one.. the price went up to $139 and Harbor freight didn't have any accessories (hammer, chisel). Ended up getting an 8 inch hammer bit from Matco. I'll tell you, this chief air hammer is a beast !! It took a little bit of time but it drove them kingpins out 👍👍 for the price, compared to snap on.. can't be beat.. another great tool from Harbor Freight!!

@KoonTrucking 3 жыл бұрын

It hits hard!

@bildo508 3 жыл бұрын

Great video!

@puterg0d 8 ай бұрын

TTC just tested the Chief, new Aircat, new Thor, and Snap-On and the Chief was pretty much dead last in that group. Performance per dollar, sure. But the Snap-On is made in USA, which is worth a lot to me.

@gabrielmerza6904 3 жыл бұрын

I bought my chief air hammer when it was only $99 and I used the 20% off coupon i got it around $85 , best n strong air hammer

@dennisfalan1623 3 жыл бұрын

Thanks for the video I think I am going to go buy a chief Long barrel I have an IR medium barrel but want more power

@derrikskidmore9752 3 жыл бұрын

Thanks, Clay

@josephriddle2772 3 жыл бұрын

MAC and Big Nasty i like most, and of course Snappy, ill have to look into the Chief Clay, thx's for bring this new hammer to my attention and realy good straight down to earth video, 🔧🔧🔧🔧🔧

@drwrencho4392 3 жыл бұрын

My mac airhammer is a beast for real

@FunkRanch 7 ай бұрын

Each hammer should have it's own new bit

@JustinDowDIYcentralhighway 3 жыл бұрын

Great Video Brosuff 🍻😎🤙

@spiritualhouse2 3 жыл бұрын

Do a side by side of the 2 removing upper and lower ball joints on a 4x4 ford with a flat punch bit

@payco1000 3 жыл бұрын

Good test. 👍

@luxuryacuraz 3 жыл бұрын

Great Video

@jantrzesiara8095 3 жыл бұрын

Thanks for the video clay I have been tossing up the thought of getting an air hammer but the price is nuts for something that doesn’t get used that much

@KoonTrucking 3 жыл бұрын

Well here’s your answer and you can use the 20% off coupon on them so that brings it to just over a long wheel based $10

@vieyraart2720 3 жыл бұрын

I use mine all the time for various things like hub and rotor removal with a flat bit to breaking wheel bearings loose and many more things

@peterchristlieb 2 жыл бұрын

Mr Clay, I used the big chief a bunch the last two days breaking some welds on our shop gate and I had to bust the head and nut off a stainless 5/8 bolt (not the head size, a real 5/8 x 11 bolt on a stuck conveyor shaft. The hammer is solid, it survived an air line full of water and a couple knuckleheads at the controls. The trick is to use a real Mayhew chisel. The chief brand are ok but you run back to the grinder about 3:1 vs a USA made part. Thanks for the review, I normally buy Astro but didn’t want to be stuck using an oddball .498 shank chisel. Tool junkie that I am, I may buy the Astro anyway 😁

@koorite. 3 жыл бұрын

I love my matco air hammer. Everyone in the shop wants to borrow it because it has more power than theirs haha.

@jeffdarkness666 3 жыл бұрын

I have one, the Damn trigger fell off.. Seriously.

@koorite. 3 жыл бұрын

@@jeffdarkness666 Dang, that sucks man! Probably out of warranty too, right?

@jeffdarkness666 3 жыл бұрын

@@koorite. YEP, I'll get it fixed one of these days, until then I got my old bullet proof Snap on I've had for 15 years, it's not as powerful as the matco but a heck of a lot more reliable.

@koorite. 3 жыл бұрын

@@jeffdarkness666 Heck yeah. Our engine guy was using his snap-on air hammer a while back to knock out some frame rivets on a 2500, and after a while of slow progress he asked to try my matco since it was only about a month old then, and it knocked em right out. He said he would get one if he wasnt planning on retiring in about a year haha.

@jeffdarkness666 3 жыл бұрын

@@koorite. I like the Matco, don't get me Wrong, just wasn't impressed with the trigger, I had it for 2 years until that happened, and to make matters worst we don't have a Matco Man right now, ours retired to play with his dirt track car full time I reckon.

@TheTheomax 3 жыл бұрын

I think that the price point is going to get it in the hands of a lot of people. Also the warranty for the Chief and how many times you'll have to use it. I don't own any HF tools so I don't know how they warranty their tools. Final thoughts.. At that price I would buy one and I really don't need one since I already a IR hammer. Need or want what's the difference

@Jason607 3 жыл бұрын

Snap on is expensive but it just works

@srssrv7478 3 жыл бұрын

Harbor Freight has stepped up alot I have alot of there tools today I have A 3/8 Earthquake 20V Xt it works well and I have abused the crap out of it!

@c.r.edmister5223 3 жыл бұрын

I have that and the 1/2" and, it breaks'em all loose. My coworker uses M18 Fuel tools and my Earthquake XT are just as good if not a slight bit better.

@gilbertsanchez8914 3 жыл бұрын

What brand air tool oil do you prefer?

@c.r.edmister5223 3 жыл бұрын

@@gilbertsanchez8914 I'm not sure who you're asking but, I use Marvel.

@BearMeat4Dinner 2 жыл бұрын

Bau Bau great channel name!!! N great video. New sub here.

@johnkemple 2 ай бұрын

Okay what went unsaid was how the stroke length made the difference in being able to hold the tool on target. the snap on's shorter stroke made it easier in my opinion..like to know if the chief held up over time...

@brandong1990 3 жыл бұрын

I'm shocked you didn't buy the napa air hammer that thing goes on sale for 80 bucks every year and its awesome

@terrellscaife2411 Жыл бұрын

Thank you

@rossrides918 Жыл бұрын

Please do an update video on this! I would like to see how The Chief has held up after 2 years, great vids!!

@KoonTrucking Жыл бұрын

Works great. Torque test channel exposed it as the same air hammer as mac tools

@robertzerafa4806 3 жыл бұрын

Great test Clay but I think it would be a lot more fair if you used two new chisels instead of using it on the snapon then the harbour freight. I am sure when you cut off the first bolt it would of blunted the chisel a little. But great show as always 👏👌👍

@KoonTrucking 3 жыл бұрын

Yeah you are correct but I wasn’t going to ruin two chisels to end up with the same results and two ruined chisels ...... just saying

@robertzerafa4806 3 жыл бұрын

@@KoonTrucking Fair enough

@cassiuspuckett8789 3 жыл бұрын

Nicely done video, Clay! Got a question for you about the air hammers, after you put the chisel in the hammer. I was told not to push the trigger without the chisel against something because the chisel could come out, of course thats with the spring retainer instead of the quick change chuck. Of course I do the same thing you did holding the chisel when testing to insure it's installed correctly. Thanks for sharing....

@KoonTrucking 3 жыл бұрын

I have done it with the spring type too but ai can see how they can come out but I don’t think it will with the chuck style

@creigjordan2322 2 жыл бұрын

It can also knock the end out of the gun if done too much. The hammer hits against the end of the barrel along with the chisel - not good! The test would have been better with fresh bits, or sharpened bits in each tool. That, or using a hammer bit, or a ball joint splitter. It was good of him to do the comparison.

@haenahaesung 3 жыл бұрын

Good review..

@EATSLEEPFARM 3 жыл бұрын

Can’t beat the Astro tools aka big nasty. That is hands down the hardest hitting air hammer on the market. I’ve drove out unit bushings on a John Deere anhydrous rig with it and it either breaks um or sends um flyin across the shop. Anyone that’s took these out know they where drove in by Thor’s hammer. The Chief is good for people on a budget though for sure

@user-qz8yh8oq9e 2 жыл бұрын

The Mac and chief are the same lol

@MrADVANCEDTEK 3 жыл бұрын

Great test Clay my only downside was not giving the Chief a sharp bit on the bolt cutting test. I think it would have done it just as fast. Mac used to make a devastating air in the 90's that was so strong it destroyed itself if you weren't careful. I'm trying to remember the p/n but I think it was a PH8060 with the 4" barrel and you could feel how much more power it had over the snap on. I regret getting rid of mine. I had more problems with destroying my bits then the gun. But they changed it and the newer design wasn't as badass. Interesting vid though let's see how it holds up oh and what was the warranty on it? That's something to consider in the mix....

@KoonTrucking 3 жыл бұрын

I just didn’t want to destroy another bit when it really didn’t matter anyways. With the shape of the bit that just shows the Chief is even more than it appears! Haha I’m not sure on the warranty I’m sure it tells on the website

@MrADVANCEDTEK 3 жыл бұрын

@@KoonTrucking oh ok gotcha

@StormLaker 9 ай бұрын

I've been thinking about upgrading from my McGraw medium barrel air hammer to one of these for chassis work on my pickup. Today I had an axle spline on a CV axle that would not break. Used a dead blow hammer on it first, then hit it wiht the air hammer.....the axle is seized in there, probably the original axle that's been in it since it was built in Michigan in 02'

@KoonTrucking 9 ай бұрын

The Chief is well worth the money. It hits super hard.

@johnkordish3546 Жыл бұрын

Have you try the ingersoll rand air hammer

@abeodez751 3 жыл бұрын

Maybe test it on some suspension parts like ram truck ball joints or some big rivets Like on chevy, Not a bad test though 👍

@KoonTrucking 3 жыл бұрын

If I would have had one handy when I was available to film this it would have been perfect

@sixtytoogood-1452 5 ай бұрын

I know it’s not in the video but I’m certain that the Mac tools MPH1911 is identical to the Chief. But the Chief, it’s 1/2 the price, I found that out too late.

@andybub45 3 жыл бұрын

Ingersoll Rand makes a pretty kickass air hammer.

@KoonTrucking 3 жыл бұрын

That’s the one this is replacing, it was wore out

@joehyundaitech7961 2 жыл бұрын

my only beef is the 90 warranty it should be longer I wonder if an extended warranty is available

@kevinkieel6778 2 жыл бұрын

Chief seems to be the power tool version upgrade like Icon is the hand tool upgrade. I like my Matco better than the snap-on. most of matco's power tools are better performers than Snap-on. Except the Snap-on long and short speed ratchet. By far Snap-on's most prized power tool.

@nathanielyoung5737 3 жыл бұрын

We use air hammers in Aviation on a daily and juat so you know careful when you pull the trigger with the bit in without it against something cause I have seen them fly out with alot of force. Spring and quick styles.

@KoonTrucking 3 жыл бұрын

The spring styles I have seen but not the chuck style. I’ve tried making my snap on release one with no luck

@nathanielyoung5737 3 жыл бұрын

@@KoonTrucking when you switch rivet head sizes all day it starts to get loose and then it happens.

@jeremiahthomas2669 3 жыл бұрын

@koon trucking They have apps to measure desible levels just so you know

@donaldhollums3278 3 жыл бұрын

All you can do is be honest, that's the best way.

@Basslicks82 Жыл бұрын

How's it holding up after 2 years (presumably) on the service truck?

@KoonTrucking Жыл бұрын

Still going strong. Can’t beat it

@freedomiseverything2767 Жыл бұрын

Snap-on is an excellent tool but it's not what's the money

@zaytyga 3 жыл бұрын

Hey koon what IR branded Air hammer did you replace?

@KoonTrucking 3 жыл бұрын

I don’t know it was silver and wore out

@Journeyman1642 2 жыл бұрын

Should have put something like a metal T in the vise on both sides of the bolt so the bits wouldn’t slip off then, they both could have had a fair advantage

@Taylor98564 3 жыл бұрын

Is the chief still holding up well? I was looking into buying one.

@KoonTrucking 3 жыл бұрын

Yes

@levijasperson3457 3 жыл бұрын

Mac runs circles around the Snapon my buddie would come steal mine over his Snapon one and it feels great in the hand.

@Trappingranch Жыл бұрын

torque test channel also breaks these down in a more scientific look if anyone is interested.

@ducatiparts966 3 жыл бұрын

Tighten your vise I can’t stand watching it move side to side. Get a pointed bit and a 3/4 plate of steel and drive it in. Fresh bit first each. The flattened bit hurt the chief on the bolt vs the fresh cutting edge the snap on had. Then it was flattened worse and hurt the snap on on the rebar test. Not an easy too to test but you should use a fresh bit on each top on each test and make a guide to hold the bit from slipping off

@KoonTrucking 3 жыл бұрын

I didn’t figure it was worth ruining two bits to show pretty much the same outcome.

@misfitgarageutah Жыл бұрын

Im sure you know that the threads of the bolt are quite a bit weaker than the shank of the bolt. Also Not giving both a fresh bit right of the bat. I feel like the chief was at a big disadvantage before it even started!

@KoonTrucking Жыл бұрын

It was at a disadvantage and still performed well that was the point

@wickedbeto2732 Жыл бұрын

the advantage of the snap on is its variable trigger

@infidel66687 2 жыл бұрын

Rumor has it that the Cheif is a Mac in black clothing. Check out Torque Test Channel video on the Mac and the Cheif.

@twigb8628 3 жыл бұрын

I was one who ask about this review, thanks for taking the time and energy to put this video out

@TheTheomax 3 жыл бұрын

Ya man it's nice when you put in a request and it comes through! Also he wanted one for the service truck which means a new tool and a video to watch

@Thebassguru84 3 жыл бұрын

Drive some anchor pins out of a spider. That’s a test

@lazzyrj1 3 жыл бұрын

Clay what do think of the I.R

@KoonTrucking 3 жыл бұрын

I have one and it has been abused so this is the replacement for it

@andrewkarppinen4348 3 жыл бұрын

I just can't see spending 129 at Harbor when I can get a new Ingersoll Rand long barrel with quick connect and with a chisel set for 149.

@zaytyga 3 жыл бұрын

I used the IR branded Air hammer today. And it didn't do the job. Trust me either get the super duty air hammer that Ir makes or get the chief lol

@sergjavier1582 3 жыл бұрын

The price point...I’ll stick with the chief. Not that big of a difference between the two. Harbor freights warranty is second to none as well 👍🏽

@KoonTrucking 3 жыл бұрын

Exactly!

@walkersullivan6201 3 жыл бұрын

you also have to remember that as the veins in the air motor ware out so it will get weaker so the snap on will be weaker than when it was new.

@KoonTrucking 3 жыл бұрын

The snap on hasn’t had much use on it at all now the IR that the chief will replace is wore out !

@Chumly409 2 жыл бұрын

Want it to look cool? Snap On PH3050RBOOT should fit on it. It's a .401" shank so I'd rather invest in the truck or Mayhew brand bit sets rather than the crap that comes with them since they're all about $275 for a 5-piece set. The gun itself is good.

@jakeschmitt5161 3 жыл бұрын

I bought the IR118max kit off of Amazon for about 120, it's awesome

@kaosaepharn4326 3 жыл бұрын

Bought the 119max kit last week. POS just shot air out after a couple seconds of squeezing the trigger like one of the reviews had mentioned, which I had seen but thought maybe it could’ve just been a bad batch. Anyway, ordered the Matco the next day and returned the IR.

@jakeschmitt5161 3 жыл бұрын

@@kaosaepharn4326 idk about the 119max but I've never had an issue with my 118

@zaytyga 3 жыл бұрын

@jake my coworker has the 118max. I might have to agree with the other guy with this one. I was doing a axle recall on a accord. Used his 118 max and it didn't budge the axle out of the spindle. Used my boys mac tools air hammer and it did the job well. If I was to consider the IR line up I would get the super duty 123max( I think thats what it is) lol

@jakeschmitt5161 3 жыл бұрын

For what I paid for it, it does what I need it to

@zaytyga 3 жыл бұрын

@@jakeschmitt5161 it's def an affordable air hammer with a punch ! No doubt$

@davidwalle5025 3 жыл бұрын

good review. will either hammer drive aluminium rivets?

@KoonTrucking 3 жыл бұрын

Never tried but I figure they would. They hit hard

@davidwalle5025 3 жыл бұрын

@@KoonTrucking to drive aluminium rivets they need a smooth trigger and a long stroke, will try the chief hammer after I get one in the future.

@ronblack7870 4 ай бұрын

so you didn't have 2 bolts ?? also you used the brand new chisel with snap on then used that same chisel which is now not as sharp in the chief??

@KoonTrucking 4 ай бұрын

It was put at a disadvantage on purpose and still performed amazing. It’s easy to tell it hits harder than snap on

@AH6man Жыл бұрын

15:29 yeah ive got one too bud 🤣

@slickrick343 2 жыл бұрын

That chief air hammer is the same as macs, made in the same factory but with a different trigger mechanism

@KoonTrucking 2 жыл бұрын

You must have been watching the @torque test channel

@slickrick343 2 жыл бұрын

@@KoonTrucking lol yep, thought you call me out on that one 🤣 Any interest in trying out some tools from the UK? We got a harbour freight type store over here called Halford. They have a life time guaranteed range of tools. In my eyes it's no tool truck brand but believe it or not I find it easier to warrant a tool with them than with my snap on guy. But that could just be because my snap on guys only interested in soccer. I guess I big factor in tools is your tool man hence why you stick with old Hamilton

@coburn_karma 3 жыл бұрын

What Home Owner DIYer buys Snap On Tools?

@slowride55 3 жыл бұрын

I own a Matco air hammer that I’m guessing is from the 80s or 90s. It’s wicked and has a stiff trigger so it’s pretty much on or off. It’ll get away from you!

@rok-n-rob 3 жыл бұрын

This was not a fair comparison test. The SNAP-ON started with the bit as NEW and cut through the thinest part of the bolt being the threads. The CHIEF started with the bit already blunted and try to cut through the thicker part of the bolt which had no threads.

@KoonTrucking 3 жыл бұрын

You are right that’s why i put the text on the screen like i did to notate that

@hddm3 3 жыл бұрын

I never use 90 psi. It’s always at least 150 psi

@creigjordan2322 2 жыл бұрын

The test needs to be more scientific. New bits for each gun/test. That would be expensive, but the only way to be fair. Thanks for your effort.

@KoonTrucking 2 жыл бұрын

I was going through this exactly like I planned to give the chief a less fighting chance with an older bit to prove it can do what the snap on does w a new one. There’s really ZERO difference in power of them.