Thank you for posting this, a big help for the diesel heater I just purchased. Would love to see a heater maintenance video.

Beautiful videos on this. You saved the nightmare of an eBay heater from being returned! Got it all running now. Thank you. D🤙🙏

Woooow amazing video. No clickbait no ads spamming. A great intro with the times explained. I just knew this was not kid that made this video. Very very very nice. Straight to the point. Great explanation. ❤👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍. Realy these days u dont find a lot of videos like this. Great job 👍

Very good video for this new controller, thanks for sharing

Cheers pal just got mine up and running in 10mins thanks to your tutorial 👍

thank you for making this vid - i have 2 heaters heating my home ( well the 2 rooms the 2 of us use 90% of the time) - one is the older version and the other is this one - i prefer the older version as you can use secret menus to adjust fan , pump speeds etc etc ...... the new one has none of this ..... but saying that this one works just fine ......... i have it set to minimum all the time , thats all it needs to keep me warm - same for herself downstairs - all good - looking at mixing in filtered used engine oil but will probably make a duel fuel system with a selector valve between tank a and tank b - start up on pure kerosene , after at running temp switch over to 60/40 keresone / oil mix on tank b , and go back to tank a for 10 min before shuidown to burn off all the carbon ....... great vid man , well done

Fantastic vid,much more confident with my new heater.Many thanks for this and your previous vidio.

Quick note about the remote's battery: "27A" stands for the format (more accurately "A27" or "MN27"), not 27 amperes, which would be one hell of a revolution in the small battery world. The "A" stands for "Alkaline" (I think). The A27 is about the same diameter as the AAAA battery but much shorter, and holds only 20-22mAh of capacity, 28 times less than a 1.5V AAAA battery. The higher voltage makes it last longer on low usage.

I think these would sell better, if it did not have digital LCD controls and instead had regular knobs ...that are labelled. Having to use these screens and hold down multiple buttons, etc..gets to be to complex for something as simple as a heater.

I have this type of controller and would like to say thanks for this video. I have modified my controller to work with Amazon Alexa to be able to turn it on and off. May sound basic but it allows me to turn it on with my phone before I get home.

Have you a way to synchronize the remote control on in this style of controller panel?

Great video. Thank you.

Thank you very much for this video - theyre not the most intuitive unit. Im curious to know your thoughts on the safety of these units, especially from the persepctive of the checks it go thorugh to monitor for faults, be it during start up or operation. I am considering plumbing the pickup into my vehicles deisel tank, but would like to have a better understanding of any potential risks first.

Legend! Thank you so much for this man! So so helpful!

Thank you helped a lot.

Excellent informative video. I was on the verge of goin to check into the nutty ward before i found your vudeo an realised I'd bought a heater with the new but looks the same controller. Much Love 😂

The first mode that this guy did when it was on those who don’t know it actually did do some thing it turned on a light with a gear circle and inside the gear circle is the thermometer so it’s telling you the inside temperature and it’s to protect the inside temperature, so if it goes to a certain temperature, it’ll shut off without catastrophic failure

So helpful thank you.

Thank you for yet another great video...I watched your last one with the timer setting but cant seem to work it out..what your saying is, ie set for 12hrs at 9am should come on at 9pm..and set to run 1-2hrs..could you do another video just on timer setting please.

A very useful video. On mine I just use the timer settings, mostly. Usually the auto turn-off after the set time. It allows me to run it for the set time after leaving the area. Good for a heat boost on a cold night with just a quick trip to the heater to start it, select pump speed (usually H 6) and select the timing mode (a one hour run has been adequate thus far). Then lock up and leave. Top two buttons on the controller (I think, but not sure) select the timer mode when running. They must have programmed the minimum pump speed (5000 strokes per hour seems usual - 50 strokes in 36s or 1.4Hz) and the maximum stroke rate, along with the associated fan speeds somewhere. I am wondering if the motherboard has any means of re-programming these settings? Or maybe the smaller heater is simply fitted with a smaller capacity pump? I have a 2kW ‘small body’ heater which I have not checked out much.. That it works is a bonus, with these heaters.🙂

Got mine working but is there a setting that is the best heat for fuel ratio?

There are 3 or 4 firmwares! I have the same firmware on my blue panel, as you have on your black panel! The remote also allow button combinations too!

Thank you for your response. I am still having a problem with the heater running too hot and not responding to the set temperature. The controller is set at 20° and the room temperature is 24. This is been set for over three hours. I am roasting.

Thanks for the excellent update Mic. Your first video sorted me and my new heater. Do you know if this" new controller", can be changed for older or blue controller without changing the mother board( ECU)? Also I noted that in all your video answers you had alpine mode on. Was this necessary? Thanks. N

VERY useful, thank you. How does the "Alpine Mode" function for actual alpine altitudes--6,000--9,000 ft? In the USA mountain West, such altitudes are common. Thanks!

Good stuff Mic, I look forward to your future videos. When running the heater in manual in H1 setting, is the pump running at 0.044ml per second ie (2 pumps per second)

Great advice you give . My question is my heater turns it self on without touching any thing .I sometimes open my van and it's on draining my battery ? I have change control unit ?

We have this controller and your vids are so helpful. Do you still need to start this heater on high to burn off any residue? I’m a little confused as I know it starts up in manual mode then we switch over to auto.

Something to mention, i think these units auto regulate fuel and air to maintain a 150C case temperature. I have been testing if these units will run on waste oils, and they do. I tested with used motor oil mixed with 30% gasoline, this mixture runs fine around 145C and the machine will start on it just fine. a 20% gas mixture ran fine but the start up was rough in 4C ambient temp, took 2 tries to start, and smoked a whole lot, with this mix id recommend starting and stopping on diesel to get combustion temp up. I also tested 10% gasoline and 90% used motor oil, this ran fine around 140C but eventually i think it made it to close to 150C, i did not try starting on this mix, as i feared it would not start and i would have to re-prime my lines with diesel. I think this unit auto regulates air and fuel because if left long enough, the oil gas mix will reach close to 150C case temperature, even though it starts out lower. I also ran this heater on straight diesel and on setting 6 i only got the case temp to about 150C. HOWEVER, after running my 10% gasoline mix i switched the fuel back to straight diesel and once it went through all the lines i was able to see 190C case temp, then it slowly lowered back down to around 160C. I think this unit attempts to auto compensate for different grades of fuel and it tries its best to get the case temp to be stable at 150C, this process is slow, but i think that is what it is doing. I am trying vegetable oil in this heater next.

Omg ive been pulling my hair out trying to figure out why i cant figure out my controller - didnt know until i found your video that theres a newer model that looks the same but operates differently 😣 Thank you so much for posting this 🙏

My temp on the top left stay 34C try lower down using manual but won’t change to 19C. Any help much appreciated.

Again thank you for the knowledge about the heater panel. Did you really test all 1000 possible numbers for a menu? :D

Really helpful video. Just installed our new heater and could work out how to turn on and off but nothing else. This has helped tremendously 🙌🏻👏🏼

Hi, Have you ever gotten 3 lines and a smal v.......... like this. - - - v On this controller. Just lights up when i connect to battery and no buttons are responsive. Instead of P12 v it show the lines and v. So I can not use the heater at all. Suggestions? thanks so much.

Nice

Can you point me to, or do a video of how many controller iterations there are or have been and their respective timelines. If I ever want to upgrade I would like to know which may be compatible without rewiring the board, or how-to rewire the controller.

Great information, can you show how to set the time/clock and the timers? Thanks

Thanks Mate.

hi , how long did you have to prime before the fuel reached the pump ?….also I have the blue controller and it appears to do exactly the same functions as your black one and the little blue icon by the air intake is exactly the same as yours but there are other blue controllers that function differently with a slightly different icon .

😈👍...Hi..I bought it for my garage, it works great,.thank you.!!

Says video was uploaded 3 months ago I guess they have released another controller since then .. the new one I’ve seen has a round dial on it and it’s voice activated along with your remote control. Can you check it out and make a video on that one .?.

Hi very detailed explanation thankyou..just fitted heater and get error 2.. its connection to 12v battery

I have what i think is this new controller but my fan blade image does not rotate- but heater works well- have you come across this?

On this type of controller do you know how to put it into Hz mode as i need to connect it to a separate water heater controller

So if you have it on H3 can you put it in alpine also, to slow fuel use?

I recently purchased a diesel heater, but I can’t work out how to prepare the remote to it and it’s got the circle with a lightning like that one you showed on display

Legend!

if I want to order a new control for my burner, (3 years old) does the new type of control have a type number and how do I know that it fits the burner?//Erik

Same control panel as I've just received, did you manage to pair the remote please as I'm having no joy what so ever 🤔

My diesel heater has a red controller that went out. Will the black one work on this diesel heater?

Hello, it melts to a maximum of 90-95 degrees Celsius. I don't know what to do, I can't set anything. i At full power it seems that the fan is running at full speed but the fuel pump is running slowly .. Thanks for the ideas

Hey i cant figure out how to set an automatic timer, is that even possible with these new controllers? I hwve exactly the same as you

hi have u had any problem with the controller going faulty and doing in the fuel pumps as i have had a near new pump go faulty so replaced with new one and it has stopped working as well so tryed new controller and pump and all seams ok . would love feed back on this problem and if i can replace controller with old stile unit .

Can you fine tune the fuel/ fan ratio on this controller?

Hi what is the symbol that is circled In the picture on the video before you start

Can the heater also be set to turn off when the desired temperature is reached, and turn on again when the temperature in the room has dropped too far?

Does the remote need to be programmed prior to use?

I would like to know why my controller do not show the voltage? I only see 3 bars and that it? also I tried to push the buttons for diesel pumping and then after i tried to start. it doesn't work. I cannot see anything moving. I cannot browse the menu. The only time I see something was CO-1 for remote control pairing and that all. The battery is fully charged and it is a deep cycle battery for rv and not used at the moment. and it is a 95 amps hour deep cucle group 31D. also the engine and diesel pump does not any noise. is it deffective unit ?

Hi the heater i have is the upright all in one,its up and running but i, struggling to set the thermostat so it switches off at say 20c, help cheers.

Im looking for an icon guide for this unit.

Hi, Can the heating stop by itself ? No sound when I reach the correct temperature ?

So, on the new one I cant adjust max/min fan speed, hertz pump etc????

I noticed on this newer heater the fuel pump pulses fast no matter what temperature I set it. And consumes twice the amount of fuel my older heater does. ??

Any thoughts on why my power on off switch won’t work. I have to keep insert /remove the battery to start /stop👎 I used to on off with the remote but since changing the battery in the remote the remote doesn’t seem to talk to the main controller

What does the red circle with the red dash mean?

Hallo het rode stekkertje zichtbaar op mijn controller wat betekend dat?

E-2 error. my first battery wasn't strong enough for the glow plug. i switched to a big car battery and no error. hope this helps.

How do I get my heater to stop at the set temperature? In manual or automatic the heater continues to pump fuel and heat. 6:10

how i can reset the remote control pair for use in another identical display?

really helpful video, as is the one prior to this. I was hoping to set the timer to have the heater come on daily for an hour and then turn off itself, but it appears its only possible to set it to come on once, and then you need to set the off time while the heater is running... Am I picking this up correctly?

The new remote control with OLED display has 2 x AAA 1.5V Micro LR03 cells. WTF A27 or A23 that annoys everyone. OLED display remote control (433Mhz) should be / is compatible with the new controller according to the operating instructions. It is cheaper to buy an OLED display remote control than A27 batteries. I use two old 1,2V Ni-MH... Thank You for the Video!

Got a E8 code. Pump is pumping Diesel. I removed and checked the glow plug and it got very hot. Primed to a point that raw fuel is coming out of exhaust and still shutting down on E8. Screen on glow plug is clean...HELP PLEASE...

Setting button is not working on mine. What can i do?? It is totally without function.

Hello , for this tipe of contoller i have an error E-2. COULD YOU TELL ME PLEASE HOW TO FIX IT? THANKS

Do you know how to fix E-02 over voltage?

My heater doesn’t display anything unless I hit the on button and then tries to start up heating can’t stop it.

Mine scrolls past 1-6 never a heat temperature. It just cycles straight through. Wish it would stop on 1 or 6 when using the remote i never know what setting its on without looking

I set the controller to oc1 but the attached remote control does not make contact. Does anyone recognize this problem?

Hi I have the exact same controller but when I try to prime using up and down button screen goes blank and won come on....😢 any ideas ....help appreciated

After priming, I turn the power on and then it shuts down and powers off after a few seconds. Any thoughts?

What is the circle with the red line

How do you change from Celsius to Fahrenheit

Is it possible to change it from °C to °F ?

One option for a controller is simply a rotary knob with an LED on top for errors. But I did not realize that the lowest it will go is 2 hz, or I would have gone for this controller. At the temperatures I am in, I only need 1 hz, so 2 hz is using twice the fuel I need to use.

The heater with this display seems not to get any hotter than 184 Celcius. I've got two more of these heaters, bought 2 months ago, they have blue displays. These heat up to 212 Celcius, of which I'm very satisfied. How can I crank this new one op to at least 200 Celcius??

I have an e: 01 code coming up every now and again what’s the problem?

My heater does not stop when it gets to set temperature. For example: 1) Trailer is at 14C 2) I set temperature to 20C. Heater turns on and heats 3) Trailer reaches 20C. Heater goes to minimum setting but does NOT stop 4) Trailer temperature keeps rising to 25C+, very uncomfortable. How can we have the heater turn off or run fan alone when reach desired temperature?

Am so frustrated. Endless correspondence with China. No help. Need to know how to pair (link) the 4 button remote to the "Voice Broadcast Controller". Any help is appreciated. Peter McElroy

Hey, i'm still looking for the admin password (3 pin), does anyone have information about it ??

My heater gives me an E08 code, it starts and then stops working with the code, how can i fix it?

I am feeling jealous of all you people. The "I'm roasting" comment was hard to deal with, as i have been tryn SO HARD lol. I chilly. I Bought it installed in a van already, fixed a connector & with minor adjustments the lcd lit up....i'm now waiting to check fuel line primed in morning. My battery is hooked to a trickle charger thingy 12v on low as per my best mates instruction. My lcd will not turn off & only shuts down if/when i disconnect the charger. Also my blue fan icon has neva spun. I get the cold air thru vent. Pls Halp

Why does my screen keep shutting off a few seconds after turning it on?

Hi Mic, great video and my has just started showing E-8 while trying to start up. Do you know what this may be? All I've been able to find is E-08 in Google search. Some say fuel issue? Can you enlighten me before I lose my sh#t. Cheer

Would be an even greater video if the heater worked. Mine powers up, fan spins then turns off without an error code.

My controller is a older one but I can't open menu

Getting e2 error on a 12 v system . Won’t start up. It’s on 13 volts Anyone have a fix for this?

On my screen my fan doesn’t move like yours is spinning?

This controller is worth nothing, at full power the housing gets to 210 degrees and than it starts to derate te pump frequency in an irratic way to limit the temperature, not a very elegant way. I swapped the motherboard and controller with the old type and adjusted the advanced settings, runs perfectly fine now. May be the factory is able to tune the heater with this controller, mine was not properly tuned, way to much fuel.

Why does my fan come on after evenhours after its all been turned of.

The secret menu is for tuning