Chrysler 3.5 Ticking/ Rattling Solution

No video

Chrysler 3.5 Ticking/ Rattling Solution

Рет қаралды 17,101

Күн бұрын

This pertains to any Chrysler 3.5L engine. I apologize to the quality of the video it was a last minute decision to film it to try and help you guys identify your problem and possibly save yourself some money.
Part Number- 4892293AC
Like and subscribe, I will try and push out more and better videos as things roll into the shop. We also will be pushing out videos of racecar builds and our racing adventures. Our shop name is Patriot Performance & Automotive LLC on Facebook and Instagram

Пікірлер: 23

@djcezile9631 11 ай бұрын

By the way, make sure that you torque it to only 23 ft/lbs; if you try 31 ft/lbs it’s gonna strip, (happened to me). So be careful, the guy in the video meant 31 n/m, which converts to 23 ft/lbs. I’m sure it was an honest mistake.

@yoyoyo19992001 5 ай бұрын

@djcezile9631's comment needs to be pinned.

@jamondrake7834 2 жыл бұрын

Best video for this situation I’ve ever seen even w/o details. Would love more for the 3.5 Chrysler! I hv an 06 learning and doing everything myself, so I need these vids!!

@Erated78 Жыл бұрын

Thank you for this video, it’s well done with all the important information we need. My 2010 300 with 3.5l only has 70,000 miles and inevitably will lead to me having to do the rocker shafts. Super helpful video, thanks again and cheers

@real-worldcontent7745 9 ай бұрын

And it's a good idea to cover the intake holes with a rag while your working on it

@frankieboy2417 Жыл бұрын

There has always been a ticking noise with my 2005 300 and now there is a knocking noise so I shut it down and going to do this this vid is good enough for me.

@T0tenkampf 2 жыл бұрын

Thanks for the good info on the updated part number!

@dontecox6389 6 ай бұрын

Can you make a video showing how to disassemble the Exhaust and Intake from the Engine Rocker Arm

@user-sp7tp5mj4c 2 жыл бұрын

Hi just curious where did you order the full rocker arm and shaft assembly from ..thanks

@andresherrera398 6 ай бұрын

I don't have to turn the cams to set the rocker arm assembly?

@guadalupemacias4906 Жыл бұрын

Nice video

@chrisrose5503 Жыл бұрын

When did Chrysler come out with the updated valve train design.

@MrOctNot 6 ай бұрын

WHY does Chrysler say that this "complete assembly" WILL NOT fit a 2008 4.0 v6 ? The "complete assembly" part fits a 2007, and every individual part listed for 2008 ALSO fits the 2007. Strange?!?

@kenkerr7048 Жыл бұрын

3 big things then a lot of little things lol, question, do you have to soak the lifter in oil or do they pump up when running? I’m going to be doing mine soon. I hope it hasn’t messed my cam up. When it gets bad I usually turn it off then start it again and it stops.

@marcosrocha6997 3 жыл бұрын

my tick is very little (probably just one) and still disperses fresh oil onto the rockers and has all lashes could i still drive it?

@1torqued6point0 3 жыл бұрын

Hey I'm sorry I am just seeing this, yes you can still drive it especially if it is still getting oil. Your problem is probably a slack adjuster. it will not be at optimum, but will be ok to drive until you get a chance to fix it.

@johnniebradley3101 2 жыл бұрын

Do you need to bring a cylinder to tdc?

@fernandosebastian6232 2 жыл бұрын

@@1torqued6point0 we