#citroenc5 #replace the old tire #gas nozzle #how to install the nozzle
If the copper washers under the nozzles (heat shields) are not replaced in a timely manner, the washer will burn out. The entire valve cover is tightened with resin. This occurs due to the fact that the combustion process in the cylinder becomes not sealed, and the mixture "climbs out" in the form of resin.However, coking of the nozzle landing holes is not the worst consequence. Few people know that they perform the function of removing excess heat from the nozzle atomizer and wear out their effectiveness. Therefore, if the washer has burned out, then we can say with almost absolute certainty that the atomizer itself is already "blue" from overheating. And then simple math.