Civic EK K Swap Mount Kits Explained (Including the NEW AWD!)

  Рет қаралды 31,490

VTEC Academy

VTEC Academy

Жыл бұрын

Civic EK K Swap Mount Kits Explained: EKK1, EKK3, EKK6 and EKK1AWD
By Brian Gillespie and Aaron Gaghagen
A K swap into a Civic 6th gen is a no-brainer. It's pretty much a bolt-in affair with the available aftermarket support for the car. There are things that you must get right to get the swap to mount correctly the first time. Brian walks us through all the differences between the main 4 swap mount kits of the EK Civic from Hasport Performance. You know, his day job!
Like us? We’d Love Your Support!
Help Support VTEC Academy by hitting up our store for gear at vtec.academy/shop/ or help us by sharing (it’s free!) this post or others with other cool Honda people.
You can find killer deals on stuff we actually use here on our Amazon Page at www.amazon.com/shop/vtec.academy. Items you buy using the link will give us a small kickback and help us bring you more Honda and Acura projects!
You can also help support VTEC Academy by shopping for your Acuity Instruments parts using our link at acuityinstruments.com/?ref=vt...
Nothing but Hondas. That’s exactly what you’ll find at VTEC Academy. Because Soichiro Honda’s passion for motorsports and his company’s ability to express that in the machines they produce make a whole lot of sense. VTEC Academy is a place for Honda fans who feel the same way and who seek the most accurate technical information and commentary to continue that very legacy and make whatever Honda it is that they drive just a little bit better. And faster.
The editors and contributors of VTEC Academy are some of the industry’s most experienced and trusted, which means the informative, unique perspectives you need are all right here. And, like you, we’re also obsessed with Hondas. So, subscribe to our channel and hit us up at vtecacademy.com or, if you’re into social media, you can get your daily dose of VTEC Academy on Instagram, Facebook, and Twitter. We’re always on the lookout for cool, fast Hondas.
DISCLAIMER:
VTEC Academy videos are for educational and entertainment purposes. We can not guarantee the modifications performed in the video are legal in your locality. Do not do any modifications to your vehicle that will void your warranty or in any way violate your local laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

Пікірлер: 117
@chancextw
@chancextw Жыл бұрын
In this channel, I have learned a lot of information about kswap. I'm also starting my kswap project now!
@jdokes9376
@jdokes9376 4 ай бұрын
cant wait till I get all the parts lined up and can start wrenching
@possibleproblem479
@possibleproblem479 Жыл бұрын
this is definitely very informative. Ive got an 95 lx sedan thats in pretty nice shape and ive been wanting to put something a little meaner in it. i was under the impression that there would be a lot more fab work involved with the subframe and original mounting holes but apparently its much easier then i expected.
@cbsvth22
@cbsvth22 Жыл бұрын
Totally surprised your channel is not already at 100k subscribers shoot you need 500k.
@d.bray1
@d.bray1 Жыл бұрын
It is now 🎉
@ramonbriones4487
@ramonbriones4487 Жыл бұрын
Good stuff my man! I don't have IG but I'll tell the homies and hopefully one wins these mounts
@isrv
@isrv 10 ай бұрын
Vtec academy??? 😭 let’s goooo 📚 📚
@justinirizarry8594
@justinirizarry8594 Жыл бұрын
I could watch these videos all day!!!!! The content is always awesome!!!!! 🤟🏽
@VTECAcademy
@VTECAcademy Жыл бұрын
We appreciate that!
@bryantmarte8122
@bryantmarte8122 Жыл бұрын
Hey what's good love what you guys do can you please make a video of a gk5 fit/jazz k swap please help
@eddiecard
@eddiecard Жыл бұрын
I’d be down to drop mine off and have these guys go crazy w another k swap for my humble Ek.
@ariesr4883
@ariesr4883 8 ай бұрын
Long time no see Brian... Last time we talked was at that meet close to Ontario when u showcased your CRX Glass intake pipe. I'm still rocking your EKK1 MOUNTS that came with your hasport axles with DC sport package practically the FIRST mount kit available back in the day. Btw can you also explain the axle placement that the EKK1 MOUNTS that has an issue with and if there's a fix for it? Thanks for everything!!!!
@skitownstreetcred
@skitownstreetcred Жыл бұрын
Is there a space in the Hashtag??? Thank you for the amazing content!
@VTECAcademy
@VTECAcademy Жыл бұрын
No space in the hashtag. Remember it needs to be in a post so we can search it.
@iron-gamerstv
@iron-gamerstv Жыл бұрын
I have a question, I have a 2012 Honda Accord i4 automatic with a K24Z2. I found a K24A2 RBB-1 complete cylinder head. How can I get this head to work on my K24z2 ? Do I need to change anything, crank sensor etc..? Thank you guys for all the amazing.
@Orlen88
@Orlen88 Жыл бұрын
Hi thanks for knowledge. How are axels angles with ekk3 tsx motor and transmission? Incredible job you're doing
@VTECAcademy
@VTECAcademy Жыл бұрын
They point a little forward, but they are OK.
@Orlen88
@Orlen88 Жыл бұрын
@@VTECAcademy Thanks for reply. So what would you recommend for Ek civic? Ekk2 mounts with eg subframe or stick to ek subframe and go with ekk3 mounts. Actually that's my last moment to decide before buying mounts 😅
@thedungeonmk2
@thedungeonmk2 9 ай бұрын
Is it possible to cover the HASPORT LEAN mounts on EG/EJ chassis?
@jamesg8460
@jamesg8460 Жыл бұрын
Contemplating k24a with k20z3 transmission and head swap will the 8th gen si shift cables work ? Buying a 0 6 sonar si trying to do use all parts off it that I can thanks for any info looking for eg or integra sub frame are they the same? And what rack would I have to use? Have 2000 civic hatch looking to swap
@DeathStrike-jk8gt
@DeathStrike-jk8gt Жыл бұрын
Do you have any plans on shipping to your friends up north?
@tunanocrustgarage
@tunanocrustgarage Жыл бұрын
I would love the the AWD kit. If nobody jumps on it I may have to do a dual engine setup. B series AWD setup and a K series AWD setup :)
@VTECAcademy
@VTECAcademy Жыл бұрын
That would be crazy.
@paullorn2738
@paullorn2738 Жыл бұрын
Clean
@eddyoriginal777
@eddyoriginal777 4 ай бұрын
Will I have the same trans clearance issues running crv awd with an eg subfrme in my em1 coupe? Thanks for the vid btw.💯
@VTECAcademy
@VTECAcademy 3 ай бұрын
No, you won’t have the same clearance issues.
@majidalmajid1111
@majidalmajid1111 Жыл бұрын
Great 👍
@VTECAcademy
@VTECAcademy Жыл бұрын
Thank you! Cheers!
@gregorytoussaint509
@gregorytoussaint509 8 ай бұрын
Can I still use the ekk6 mount kit with stock ek subframe I’m using the k24z7 transmission out the 9th gen si?
@PoloDon-wq9ib
@PoloDon-wq9ib 2 ай бұрын
do u make any auto mounts for em2 civic putting an auto swap in an em2 /es1 need help thanks
@Outvid171
@Outvid171 2 ай бұрын
For the k24z3 engine, can a person use the k24z1 timing cover for standard crank sensor? Ive noticed that timing cover accepts the traditional crank sensor even though it's a k24z series. Which would be a junkyard option rather than custom order.
@sstig13
@sstig13 Жыл бұрын
Will the K-swap mount kit you guys are making for the 1st gen CRX work in the 1st gen Integra? If not will there be a kit for the 1st gen integra? I feel like my car never gets any love from the after market lol. Would love to have the option to go K if I want to someday with a mount kit.
@VTECAcademy
@VTECAcademy Жыл бұрын
Yes it will
@user-gb3ec2ow3m
@user-gb3ec2ow3m Жыл бұрын
We are waiting for you hotter than the embers
@VTECAcademy
@VTECAcademy Жыл бұрын
Hell yeah!
@iJustB58
@iJustB58 29 күн бұрын
I just bought a full k20z1 swap and I have a 98 ek hatch shell. Will I have axle issues using the ek subframe at 600ish whp?
@stelliosgletos1169
@stelliosgletos1169 19 күн бұрын
if i use the ekk3 mounts, with the cl9 box, what shafts do i run?
@PeterTron
@PeterTron Жыл бұрын
Will you ever come out w factory bushing type for any swap mounts? Some of us are running naturally aspirated and would like some comfort vs hard urethane and vibration for daily driving
@VTECAcademy
@VTECAcademy Жыл бұрын
We are trying different formulas. We haven't found anything both durable and soft.
@PeterTron
@PeterTron Жыл бұрын
@@VTECAcademy thank you so much for replying!
@Fyxxterzc
@Fyxxterzc Жыл бұрын
Ekk awd let's gooooo
@VTECAcademy
@VTECAcademy Жыл бұрын
That's spirit!
@shanerichardson9568
@shanerichardson9568 8 ай бұрын
How hard would it be to swap the crv engine transmission and awd into my 1990 civic lx sedan? I just want a straight auto transmission swap. Basically just a better civic, not really a hotrod.
@viral-mania
@viral-mania 6 ай бұрын
Hi im from south africa i have a right hand drive ek civic .. the engine is a k24a2 from a type s Honda Accord the gearbox is a 6speed from the Accord typeS , they sell the engine and gearbox as a combo here in south africa ..which engine mount kit do i buy from u guys ? I have installed the eg civic subframe already but not 100%sure which mountkit will work with the k24a2 6spd accord type s gearbox..i know its not ideal to run this gearbox but its all we have here the other gearboxes are very scares n extremely expensive n overpriced
@AdinSLaboy
@AdinSLaboy Жыл бұрын
nice inf he'll yeah very informative also I know u do does mount for Da but I get confuse wish one I have to buy can u give me the right part number ?
@AdinSLaboy
@AdinSLaboy Жыл бұрын
b series but I have b18b bottom that's my confuse now the I swap for a new year model if its still the same ?
@VTECAcademy
@VTECAcademy Жыл бұрын
Was long as you use the DA block bracket and transmission.
@cwinney13
@cwinney13 Жыл бұрын
I have the EFKawd kit and didn’t modify anything on my wagon 🤷🏼‍♂️
@trigger1956
@trigger1956 3 ай бұрын
Does any of these kits fit the k20 euro R ? I heard the transmission case is bigger and also the mount.
@VTECAcademy
@VTECAcademy 3 ай бұрын
Yes, EKK4 does. It is similar to the first gen TSX.
@Kxngwashere
@Kxngwashere Ай бұрын
About mount L15B7 for ek
@VictorGdot-id9rb
@VictorGdot-id9rb 3 ай бұрын
Seeing as the 06-08 TSX trans case is magnesium, does that mean the Accord matching trans is made of magnesium also?
@VTECAcademy
@VTECAcademy 3 ай бұрын
No it's aluminum.
@TheAndrewGR
@TheAndrewGR 11 ай бұрын
I have the EKK2 kit with a K24. Would I put the Side mount on the lower setting and the rear on the highest? To have hood clearance. Really confused.
@VTECAcademy
@VTECAcademy 11 ай бұрын
Yes. The side mounts are on the engine and the rear mount is on the frame. That’s why you use lower hole on the side brackets and top hole on the rear.
@TheAndrewGR
@TheAndrewGR 2 ай бұрын
@@VTECAcademy I want to lower my Civic now and noticed the oil pan is way too low. I was going to put the side mount on the higher setting to raise the engine, but for the rear, would I put it on the lower setting? Thank you for your help
@hawksmage260
@hawksmage260 Жыл бұрын
Hello sir,just want to know can i use k24 cranksensor into k20a eng?as i know the wire code only need to change..did anything need to chnge if i use k24 cranksensor?
@VTECAcademy
@VTECAcademy Жыл бұрын
The connector and wire positions are different on some of the K24 Crank sensors. But they can be used.
@perkinortiz7682
@perkinortiz7682 Жыл бұрын
Hi tha one fit k24a8 automatic transmission in ek sedan
@marvinreyes6270
@marvinreyes6270 Жыл бұрын
Hi sir from just wanna ask about my ek 2000 if i use subframe original i can install k24 motor
@VTECAcademy
@VTECAcademy Жыл бұрын
Yes. It will sit a little further forward with the stock subframe.
@grpAfactory
@grpAfactory Жыл бұрын
I wonder how the ekk1awd mounts work for the CRV rd1 👀
@VTECAcademy
@VTECAcademy Жыл бұрын
We will have to try them in a car.
@skitownstreetcred
@skitownstreetcred Жыл бұрын
​ @VTEC Academy I just realized that I asked one of the most ridiculous questions haha. I'm newer to hashtags. I thank you for the response. I've been looking into a swap for my 86 FWD Wagovan, and I'm leaning towards crv/AWD/k20 or 24 so I can make it a rally car. Are you guys going to start on the Rally Wagon Project? I'm the biggest rally fan and I believe more people nowadays are liking rally than ever before... Thanks again you guys. If you ever need any help or have questions about videography, let me know. That's what I do for a living and would absolutely love to help out. Cheers!
@VTECAcademy
@VTECAcademy Жыл бұрын
That one is dear to me too. I don't know when we will have time to start on it. Hopefully by summer's end.
@skitownstreetcred
@skitownstreetcred Жыл бұрын
@@VTECAcademy I live in Colorado, so mine is buried under snow at the moment. The weather is starting to warm up here in Steamboat though. So that's good. I'll be on the lookout for the build!
@user-gb3ec2ow3m
@user-gb3ec2ow3m Жыл бұрын
When will you install Engine Mounts K Swap Accord 98 00
@VTECAcademy
@VTECAcademy Жыл бұрын
Some day. It's just a matter of time.
@BCsnowCONCIERGEdotCA
@BCsnowCONCIERGEdotCA Ай бұрын
What’s a ‘rabbit radiator’?
@julioortega1888
@julioortega1888 2 ай бұрын
I want them please
@jamesthebond0072
@jamesthebond0072 7 ай бұрын
I’m confused of what you had to change the front subframe in order to get a k motor in a ek
@VTECAcademy
@VTECAcademy 7 ай бұрын
What to change or why? Is there a word missing in your comment?
@MimmsHondaDay
@MimmsHondaDay Жыл бұрын
👍🏻👍🏻👍🏻
@VTECAcademy
@VTECAcademy Жыл бұрын
K is the way!
@rairiuzent2
@rairiuzent2 9 ай бұрын
👍
@coreysda7984
@coreysda7984 Жыл бұрын
What motor mounts options are available for 1986 civic rtawd wagon
@VTECAcademy
@VTECAcademy Жыл бұрын
Hasport hasn’t released a stock replacement mount kit for the third GEN civic yet.
@coreysda7984
@coreysda7984 Жыл бұрын
@@VTECAcademy do you have a car to do mock up on?
@PaulGotSole
@PaulGotSole Жыл бұрын
Im in need of some help. I have the ekk3 mounts but I don't know what axles to purchase. Can anyone help?
@VTECAcademy
@VTECAcademy Жыл бұрын
Hasport EKK axles.
@brs5490
@brs5490 Жыл бұрын
I'm gathering the parts for my swap in my 97 ej. I've got almost everything except mounts and a trans. 04 tsx k24a and 92-95 subframe. I'm not on instagram.🤬
@aweyeaauh5383
@aweyeaauh5383 9 ай бұрын
I wanna get this kit for k24 with z3 trans but everyone says they destroy axels , is that true ?
@VTECAcademy
@VTECAcademy 9 ай бұрын
I don't see why it would.
@nooooooooooo6uoki67
@nooooooooooo6uoki67 6 ай бұрын
@@VTECAcademy people online have been saying to move to eg subframe because axle alignment but I dont know how true that is.
@nexgenjtf9889
@nexgenjtf9889 10 ай бұрын
Did u change the subframe?
@VTECAcademy
@VTECAcademy 10 ай бұрын
Not on these mount kits. EKK1, EKK3, use the stock subframe.
@jxelll6640
@jxelll6640 Жыл бұрын
Can i change the Engine Brackets while the Engine is still in the Car? I have to Change my ekk1 to ekk2.
@VTECAcademy
@VTECAcademy Жыл бұрын
The left hand bracket is tricky, but yes.
@jxelll6640
@jxelll6640 Жыл бұрын
@@VTECAcademy okay. Its pretty tight tight there right? Have to push the Engine a little bit to the right i guess
@VTECAcademy
@VTECAcademy Жыл бұрын
@@jxelll6640 Yes.
@tylerwelsh5970
@tylerwelsh5970 Жыл бұрын
Is this the k24a2 motor with ekk1 mounts?
@VTECAcademy
@VTECAcademy Жыл бұрын
Yes
@charliestrunk2337
@charliestrunk2337 Жыл бұрын
Do you have a 6 Speed for a two thousand nine honda accord two point four
@VTECAcademy
@VTECAcademy Жыл бұрын
If you’re talking manual, that would be from a 2009-2014 TSX or 2012-2015 Civic Si. Not one for sale.
@grandazzo6634
@grandazzo6634 Жыл бұрын
Do you have for95 Honda Accord k24
@VTECAcademy
@VTECAcademy Жыл бұрын
Hasport is currently redesigning the mounts for CD Accord. They should be out soon.
@gallolinks
@gallolinks Жыл бұрын
Why do ppl complain about the axles having a weird angle w these kits
@VTECAcademy
@VTECAcademy Жыл бұрын
On the EKK1 kit the engine sits pretty far forward. That why Hasport also makes an EKK2 kit that uses the EG/DC2 subframe and lets you move the engine back, improving the axle angle.
@gallolinks
@gallolinks Жыл бұрын
@@VTECAcademy so changing the subframe to one from eg instead of the oem in ek would be the way to go?
@victorwilks88
@victorwilks88 Жыл бұрын
I schooled everytime
@VTECAcademy
@VTECAcademy Жыл бұрын
Ahaha! Thanks for watching!
@peegee6625
@peegee6625 Жыл бұрын
Where can I get dAt transmission mount for k24a4
@VTECAcademy
@VTECAcademy Жыл бұрын
sales@hasport.com
@peegee6625
@peegee6625 Жыл бұрын
@@VTECAcademy hve a direct link to dAt exact part?
@VTECAcademy
@VTECAcademy Жыл бұрын
@@peegee6625 I don't. Individual mounts and basket are usually sold through email conversation to make suer you don't get the wrong part, or a part you can't use.
@Service_472
@Service_472 8 ай бұрын
Здравствуйте, я живу в другой стране, отделающий нас океаном, можно было как ни будь платно получить чертеж на крепление, у самого ек3. Спасибо
@mrjefry5011
@mrjefry5011 9 ай бұрын
Why people swap the subframe if this kit works?
@SneakHeat23
@SneakHeat23 8 ай бұрын
I’ve heard of people having axle issues due to running ekk1’s not 100% sure on it tho. Been contemplating on going ekk1, cant decide as I don’t know how true those claims are.
@iJustB58
@iJustB58 29 күн бұрын
@@SneakHeat23what kit did you end up going with? I have a 98 ek hatch and I just bought a full k20z1 swap last week.
@user-di1io4kx5p
@user-di1io4kx5p 8 ай бұрын
NICE👍By Japanese
@gocars3210
@gocars3210 Жыл бұрын
I would have used "hello bruce" monty Python
@VTECAcademy
@VTECAcademy Жыл бұрын
From the University of Woolamaloo?
@seanmiller678
@seanmiller678 Жыл бұрын
Little known fact: "no0o!" Is the most common word spoken by Honda performance people... 😢
@VTECAcademy
@VTECAcademy Жыл бұрын
HAhahaha!
@kc3747
@kc3747 Жыл бұрын
Ford Escorts
@VTECAcademy
@VTECAcademy Жыл бұрын
Dating service?
@bgee461
@bgee461 Жыл бұрын
I love getting schooled 👍
Everything You Need to K24 Swap a Civic EK- Mighty Car Mods Edition
43:32
Every Civic EG K Swap Mount Kit Explained
26:20
VTEC Academy
Рет қаралды 45 М.
Получилось у Миланы?😂
00:13
ХАБИБ
Рет қаралды 4,8 МЛН
Inside Out Babies (Inside Out Animation)
00:21
FASH
Рет қаралды 22 МЛН
Эффект Карбонаро и нестандартная коробка
01:00
История одного вокалиста
Рет қаралды 10 МЛН
CHEAP EBAY K SWAP HARNESS ! Does It Work ?? #SOLD
24:49
YoungStatic
Рет қаралды 40 М.
We put a $500 engine in our $10,000 Civic
46:22
Mighty Car Mods
Рет қаралды 2,1 МЛН
Need Some Help? Hasport K Swap Mounts. Part 1.
12:50
jsRebuilds
Рет қаралды 16 М.
$120 K20 Swap Motor Mounts From EBAY MOTORS
19:21
YoungStatic
Рет қаралды 42 М.
HOW TO K SWAP A EM2 CIVIC PART 1
24:18
Texas Honda Channel
Рет қаралды 13 М.
Why This Tiny Honda Engine Can Make 1000hp
16:40
Donut
Рет қаралды 4,7 МЛН
k24 build in 15 minutes
15:59
The mech a nic
Рет қаралды 487 М.
K Swapping My Honda Civic - Episode 1
14:23
Gears and Gasoline
Рет қаралды 805 М.
Фишки FORD F-150. Часть 2
0:54
Fresh Маркетплейс
Рет қаралды 3,1 МЛН
Eksperimen!! Modifikasi Sepeda Jok Paddock Sepeda
0:36
aseli bmx
Рет қаралды 907 М.
Бмв сгорела , это нормально?
1:01
NAVI ТРЕНЕР
Рет қаралды 1,3 МЛН
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
9EPIC
Рет қаралды 4 МЛН