Wrapping the first part of a Subaru STI hood. www.ckwrapstoronto.com/ Get Certified Visit www.vvividhq.com/get-certified Instagram @ckwraps @newconceptautosalon
Пікірлер: 84
@co96483 жыл бұрын
"Dont stretch confined/small areas, stretch over large areas." Noted. Wish i realized that sooner. Thanks CK. You're helping beginner wrappers every day
@fubarmofo69696 жыл бұрын
EXACTLY why I still watch ever video!! Always learn something new from ckwraps! I never knew u could heat up vinyl and chase wrinkles away like, that helped out so much on my bumper! U need to just open a wrap school!
@WillMotivation6 жыл бұрын
I have no intention of every trying to do a wrap job, but I enjoy watching you do this stuff man. Impressive. And more impressive that you are sharing your knowledge with people for free online. Keep killing the game bro. Channel is blowing up crazy! If you find a cool white pearl let me know. We Can change up the Lambo for 2019!
@erickrocks11266 жыл бұрын
Will Motivation how about that new Vvivid combat pearl?!
@rememberussliberty18224 жыл бұрын
Fortune favors the bold
@robertriedel57846 жыл бұрын
This guy is amazing...he can wrap faster than I can do an oil change. Great camera work, lighting, audio, and professionalism. I'm a subscriber now...keep up the good work
@_lyeli5 жыл бұрын
Probably the first channel I've came across that goes into details on how to wrap a car. You're not speed running through it and then 5 min through the video, voila! You actually have hour long videos! Not only that, but you have a video for each part of the car demonstrating how to wrap it. I recently bought your blood burgundy by Vivvid for 20% off (thank you so much for that!) and now I'm going to attempt to wrap my car using your methods! Thank you so much for taking the time in making these kind of videos! Awesome work CK!
@yoshi76103 жыл бұрын
I just did a hood wrap on my 2016 wrx and I’m just gonna say that prior to doing the wrap I think I watched this video about 10 times and no matter how many times you watch a how to video it is a whole lot different actually doing it for yourself. It took me around 4 hours in the beating sun and I think I sweat out about 5 lbs of water and I’m now finished and my back and my fingers hurt like hell but hey atleast I finished the wrap job, I feel I have achieved a great accomplishment and I just wanna say that if it is your first time well you’re in for a treat. ;) but i do know that watching this mans videos and getting the general idea has extremely helped me so thanks Chris I appreciate your very well instructed videos!
@stephenisaaks16 жыл бұрын
@CKWraps You are an absolute pro at what you do. Careful and thorough, keep up the good work and your channel will go far!
@aaronali20906 жыл бұрын
Your videos inspired me to start wrapping my own car, I couldn’t thank you enough for making these videos
@brianlewis50882 жыл бұрын
I did this myself on my 2015 wrx and it almost came out perfect thanks to your video. Def learned a lot. The part I had the most trouble with was the middle right in front of the scoop area. I made a few mistakes there but the rest is good. Thanks for the guidance!
@IncptnLive6 жыл бұрын
Was very helpful to see how to do the hood, especially showing the entire process. Can’t wait to see the hood scoop!
@Fl4t_jake3 жыл бұрын
Love the sound of the air being pushed out🤩
@BaileeGermanotta5 жыл бұрын
Really considering wrapping my wrx, loving your videos. Very informative. Thank you!
@antoine3ng3 жыл бұрын
ya best car vid ever bc there's no terrible music (why does every WRX vid have an edm soundtrack ugh). also informative and detailed
@Alycanj5 ай бұрын
I watch and rewatch your videos, am learning a ton, ty and your wife is a great camerawoman.
@thebeaststi43004 жыл бұрын
You always produce top quality work!
@IxliFeHackxI6 жыл бұрын
Your such an inspiration! Keep up the quality work!
@screwTHEwood2 жыл бұрын
Loving this vid Christian! My WRX is white and with black too so I’m liking the colour combo you are applying
@mk27wrx2 жыл бұрын
When it comes to wrap videos this bloke knows his stuff , great teaching keep it up bro
@Uruapan165 жыл бұрын
After watching this i feel confident in myself that i can do it , good thorough step by step on one person👍🏻👍🏻
@Fl4t_jake3 жыл бұрын
Wrapping isn’t to hard just takes a bit of time to learn!!!
@angelbruno65566 жыл бұрын
Definitely like to see the carbon wrap on the hood scoop. Awesome job.
@mystamo6 жыл бұрын
Pretty awesome that you are doing so many hood videos lately. I got my hood wrapped and it looks sweet. Thanks for posting these videos they are truly valued.
@Kadorja3 жыл бұрын
I’m glad I found these videos. I want to wrap my 15 WRX in this color and I’m definitely worried about screwing it up. Thinking about going with Avery film (bought some samples and they seemed to be easy to work with) and I have a decent install kit but I still need practice. At least these videos will give me an idea of what I’m in for.
@slobdawgs3 жыл бұрын
@CKWraps just like vinyl my man you cover everything 👌👌👌
@soylientgreen72186 жыл бұрын
Thank u so much now I too am a vynle wizard of course only like level 18 .. so far you got that level 42...
@davidle_nz Жыл бұрын
Prime example of why people pay professionals good money 👌🏽 expertise in your craft and done in quick time. Making it look easy when it’s far from easy!
@Skootl3DCreations4 жыл бұрын
7:41 Not sure, but that 'bloop' is amazing. Also, I'm following this video this Saturday when I wrap my WRX hood. Wish me luck...
@erickrocks11266 жыл бұрын
Awesome job!
@allanombina6 жыл бұрын
Please do a full wrap tutorial for thr STI please! Love your vids
@highhorseperthian5 жыл бұрын
"PERFECT!"
@felixlugo91096 жыл бұрын
Great job. If it’s possible can you do some video on the bumpers since I also have an sti that I’ll be wrapping once materials arrive. Just so I have a better idea on the bumper.
@gozentomoe826 жыл бұрын
Nice work
@HiyaImBrandon6 жыл бұрын
More sti wrap please!
@goodolbiker5 жыл бұрын
Did you use tack reducer on the hood you make it look so easy pulling the vinyl back up. I had a hell of a time doing the hood and roof on my car.
@vincevince3094 жыл бұрын
impressive!
@kurokawa4205 жыл бұрын
Can you do a video of 2011 sti bumper scoops. I’ve been struggling to get it on piece if it’s possible. Thanks
@soylientgreen72186 жыл бұрын
You are a wizard
@logansheppard30664 жыл бұрын
Will a wrap kinda mask rock chips? I wanna wrap my wrx hood in carbon but I’m scared all the rock chips will be super obvious in the finished product
@scottglasco52672 жыл бұрын
Thanks!
@patrickweser55533 жыл бұрын
What kind of prep work do you do? Clay bar, or just a good clean? Also do little Rock chips stand out?
@bradejahcampbell67786 жыл бұрын
I have a 2013 dodge charger srt, where on my hood would I start? My vent faces my windshield.
@mitch37676 жыл бұрын
Hey Christian, i started my wrapping lessons and just tried to wrap my hood myself in carbon. The problem is i keep having bubbles. You think the somewhat cheaper film i use ( homebrand from the site i order) it's air release isn't doing the job that well? I'm squeegeing the way you show it and holding the film up but the film keeps pushing air into the wrong ways. The air release pattern is made of zigzagging lines. Would it be the quality of the film or more my fault? Many thanks!!
@galens25432 жыл бұрын
I think I will put a portion of the film backing under my hood where the scoop was, that seems like a good way to keep the film from getting contaminated.
@judithasuncion56434 жыл бұрын
Hi! Does this nardo grey color have a hint of blue in it like the new honda civic do? Thanks
@soylientgreen72186 жыл бұрын
I'm doing my own kfx450r. .. I came here after two quick attempts at rear panel . When I hit KZfaq and searched. And found this guy... ok honestly I was check this bone head he has no helper this is going to be great. And it was.... it was life changing lol.. the vynle bug hit.. And I learned so much in the first video I was hooked... Thank you .. check out the kfx450r let me know what you think it's defiantly a challengr... cam you price it..iif you did the kfx450r. 2014...?
@jeprodigalson792 Жыл бұрын
Still struggling to do this on my own with all the tools you have. Starting to get really frustrating.
@davidfs.62333 жыл бұрын
Who makes the best,and Most durable wrap..Exterior my 18WHEELER..Hood..Thy
@ColorChangeCustoms6 жыл бұрын
STI for the win!
@shuffyracing29596 жыл бұрын
YES!!!!!!!
@501stmedia6 жыл бұрын
Would it be easier to wrap a hood off of the car?
@kevinkarbonik29286 жыл бұрын
I've got a question for you... I've got a BMW 2000 BMW 540i, hood has lot's of rock chips and some clear coat loss Do I have to fill and sand and prime it before I put on a wrap? Or should I just get it painted if I have to do all that prep anyway? Would a thicker carbon type wrap be easier? Any advice would help.
@CKWraps6 жыл бұрын
It depends on how nice you want it to look. If you want it absolutely perfect then you'll want to follow the steps you listed
@hondacivicvtec20493 жыл бұрын
Wow nice color what color of this
@soylientgreen72186 жыл бұрын
No dust. Not to much heat. Glass. Pull tri angle . Last but not least prep...did I miss any think
@acropodium44163 жыл бұрын
what’s the best wrap? or what do you use?
@kenyshav5024 Жыл бұрын
How much film should I buy for my wrx hood?
@Uruapan165 жыл бұрын
What size wrap did you get btw?
@TheBassman03274 жыл бұрын
how much does it cost to wrap satin charcoal on a 2015 WRX Limited
@popitscorner7776 жыл бұрын
Where do you get thoses magnets?
@RianRian-ek4pm4 жыл бұрын
is it survive the tropical sun?
@snail11695 жыл бұрын
When I try and lift my vinyl like that to glass it splits or I have to wrestle with it... it's like its got super glue underneath it... anyone know why this might be?
@Gogetta5034 жыл бұрын
It's so it can stick to you're car
@debo2263 жыл бұрын
What city are you in and how could I get into one of your classes??
@alwaysanonymous33346 жыл бұрын
Where you guys located?
@eliasurquia73694 жыл бұрын
Can you recommend me a compressor? I never see that on your videos
@vivekodedra79013 жыл бұрын
Hi This is my first time wrapping Im using chromatic nardo grey vinyl wrap. It has a clear film over the wrap. When I do the initial lay, I peel back the backing and just let the vinyl drop on the surface like in the first part of your video. I dont press down on it with my hand or squeegee it down. When I then go to lift it back up to stretch and squeegee,it to difficult to lift. Like its superglued on. I end up tugging on it and creasing or splitting the vinyl. Is there something that I'm doing wrong?
@CKWraps3 жыл бұрын
Which brand of film is it?
@vivekodedra79013 жыл бұрын
Brand: Chromatic Vinyl Films - Type: G-600 Series - Material: High-Flex Polymeric PVC Film
@CKWraps3 жыл бұрын
@@vivekodedra7901 the brand is not of high quality so this will usually make it very hard to install. I have tried a brand like this before and I couldn't wrap the car in it because the film was sticking like super glue.
@vivekodedra79013 жыл бұрын
Ok. Could you reccomend me a brand. I didnt go for avery because I thought it would be too expensive in comparison to how experienced I am.
@CKWraps3 жыл бұрын
@@vivekodedra7901 Avery will most likely be more expensive but in this case you chose a cheaper film which might end up being wasted. Avery is much easier to use for most beginners.
@sniperkelv8836 жыл бұрын
About how much vinyl does it take to cover the STI? 5 feet by 60 feet? 5 feet by 65 feet?