Trust a women to put out the very best video. Thank you so much 👏👏👏👏👏👏👏👏👏👏x

I spent 6 hours trying to fix this before finally finding your video and I thank you SOOOOO much 😂

This video literally saved me $95 from taking it to someone to get it fixed and almost $300 from getting a whole new machine lol thank you!

Thank you for this video...I spent the whole day figure out how to open and clean .. before I bring it to the store

Ohhhhhhh THANKS! The left needle was not catching anymore. I have been setting the upper looper thread hole based on other websites, which they say that the hole is between the 2 needles when the needles are at the highest peak. Your setting is better with an explanation and more accurate. I have done a lot of precise settings with this machine, not covered anywhere too including the shaft distance at the base of the lower looper. It's complicated, so I plan on making a 3D CGI cartoon of this entire calibration process. One more thing. All the tools you need to fix this machine can be bought at Harbor Freight, because this crappy machine is not worth expensives tools.

Thank you so much for posting this easy fix! I struggled for hours watching tutorials and nothing helped to find the reason my overlock machine threads were not chaining! I did the adjustment to the upper looper and it fixed the problem!

took mine to find out what was wrong new to serging, the repairman said it would cost me to repair the unit more than I paid for it, been sitting in its bag for years. Now I know what to do to fix it. Boy they sure ripe you off for repairs Thank you so much for the information

OMG I love you so much right now. I was pulling my hair out bend parts trying to make this thing work. You are a lifesaver.

This was very helpful, thanks. This was the first (and pretty much only!) video I found that helped me figure out why the left needle thread was not getting caught in the chain. Everything seems to work correctly now. And thank you the head's up on how to clean out the machine. Much less scary than I thought. Two items of note. The Allen wrench is the 2mm size and I only needed to remove the front screw to extract the face plate.

I was trying to figure out factory setting visually on loopers and you've uncovered all the details in such a visually understanding way. Now this one I'm working on is the Baby Lock 5180 but seems as tho all loopers work alike minus plastic or metal. I'm glad to not have to remove that plastic face. Because you are so willing to go thru that headache I was encouraged to go thru learning processes. Mechanic time I've spent is 18 hours removing cleaning and resetting positions. You have now helped me get a chain going! Oh the thrills we enjoy from these machines. It's definitely a great start to becoming a seamstress knowing how to move these timing issues yourself. The shop would have taken 2 weeks at the soonest along with $120 to get eval and fixed. God Bless you all!! Hopefully I can get into some feed dogs moving material. That's my next problem to solve. Seems it maybe easier than the timing...holy cow!

Thank you! I just had a really bad jam and the timing of the upper looper was way off. The bottom of the shaft was hitting the bottom plate of the machine! It works perfectly now.

would be very helpful to show which screws you remove prior to removing the panels

Omg you saved me alot of money. Thank you sooooooooo much.

Thanks for the tutorial. You have just made me a lot braver!

Great instructions! So easy to follow! Thank you!!

Great video. Very clear shots. THANKS 😊

Thanks you I followed your instructions and fix my serger that got jammed last night. 🥰

AWESOME! That is such a HELPFUL, clear video! Thank you! I'm actually looking for how to remove/replace the THREAD BASE/POSTS and THREAD HOLDER LOOPS BAR, both of which are broken. But yours was fantastic!

Wonderful explanation on how to adjust timing and cleaning of the surger. Thank you so much

Thank you! This video is so clear and easy to follow. Really appreciate it.

you are a godsend! thank you!

You're an angel, thank you!!

Thank you about to help my wife fix hers

Thank you for this video!!!!! My main sergers foot died on me and I pulled my brothers serger outta retirement and then realized I replaced it because the timing was driving me insane! Literally spent $500 on a new machine! With your video 3years after it collected dust it’s sewing like BRAND NEW! God Bless you!!! ❤️

This is sooooo helpful!

When you're doing your bottom Looper measurement, are you taking it from the r position of the Stitch length? Because that will move the cutter

Yer Awesome!

This video gets right to the point and I can DEFINITELY appreciate that! But I can’t seem to loosen the bolts with the Allen wrench that I purchased. I’ve tried different sizes and I’m trying not to ‘strip’ the bolt. Are you turning towards you or the machine when loosening the bolts?

What size/type of allen wrenches do i need to fix upper looper?

Good video. Your hex nut is more commonly called a set screw. A vacuum nozzle combined with that air can would be better.

Here's the proper timing values in the OEM 929D and 1034 Service Manuals: manualzz.com/doc/6446955/service-manual-for-homelock-model-929d manualzz.com/doc/23413070/brother-1034d-serger-service-manual I believe they are basically the same.

Hi would you have a clue as to why the feet on my surger knit lock newhome 743 stop pushing the fabric through when I put the presser foot down along as the presser foot lever is raised they move and I can surge as soon as I lower the presser foot lever the teeth stop help? Any one have a clue?

Hello! I have a bizarre problem with my brand new 1034D where the motor is revving freely when I press the pedal and feels unresisted but the needles aren’t moving and it isn’t sewing no matter what settings I change. What could be the issue? Thanks

Are you still available? I have one of these but the upper looper is still getting caught on the lower

I have tried to follow this and after 2 hours every time I adjust the upper looper to the position in the video I turn the knob and it ends up hitting my needles. What am I doing wrong??

My stitch length dial is not moving seem like it is lock, do any one know how to fix it.

Hello why my machine work fine and after couple stitches the left needle not sewing

I always wonder how to set the machine.

I was told to never blow machines with air to use vacuum attachments instead as to not fry and components

Does the upper Looper have a slight bend on it? Right at the area where the hole is