Cleaning Stainless Steel Welds With TigBrush

Рет қаралды 31,930

Жыл бұрын

Tyler is here to show you how he cleans his stainless steel welds with TigBrush passivation machine.
Ready to join the WELD™ community? Download the app in the Google or Apple stores or Log in online at www.weld.com today! Find welding resources and exclusive or refurbished videos with details to help you get the most out of your learning. Check out awesome member discounts through our brand partners and enter to win monthly mystery boxes, listen in on our podcasts and follow our social channels. linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Пікірлер: 35

@grege2383 Жыл бұрын

What about the polish mode, how does it look?

@TIGBrush Жыл бұрын

Here's a video on TIG Brush polishing kzfaq.info/get/bejne/bbaqdaZ0uZO1mJ8.html

@NUMBER_74 Жыл бұрын

I got the TBE 550 a few weeks ago. It has been Rock Solid. I am working in the food-grade / sanitary environment. I normally clean my welds with Scotch-Brite by hand or on my angle grinder. This has been a game-changer for me. Also when I use the machine I charge an upcharge per hour. It should be able to pay for itself in 9 to 10 weeks. The only thing that I do different than the video is I hold the wand in one spot for 3 to 4 seconds before I start moving across the weld. I don't necessarily brush back and forth. The Polish mode just brightens everything up and gives the whole area a better look. The customers have taken notice!

@Xmvw2X Жыл бұрын

We've used these for years. They work slick. The biggest challenge is just training people to use it right and properly clean afterwards. We have a 700 in a full production environment for 8 years, small parts, big 1000 lb enclosures, everything. Other than basic wear and tear, it's worked flawlessly the whole time.

@ypaulbrown Жыл бұрын

I need one of these, I was just cleaning some stainless 2 minutes ago....cheers from Florida, Paulie

@GRich120 Жыл бұрын

Great information! Thanks Tyler

@RoboCNCnl Жыл бұрын

nice machine !

@Welddotcom Жыл бұрын

We agree!

@21gioni Жыл бұрын

I use an old battery charger with a carbon fibre brush. It works just as good. Though if you you want flexibility you can pay between $3000 to $6000 for this machine. You should avoid arching out as much as possible excessive arching can cause carbon inclusion.

@keithjurena9319 Жыл бұрын

Welds with color are oxidized which may contribute to sensitization. This device passivates stainless which is the opposite of sensitization. Chromium is what makes stainless resist corrosion. Chromium burns out when exposed to air, this is "sugaring". Carbon can precipitate chromium in Weld HAZ.

@hueinismo1 Жыл бұрын

Hello, how to spot tig with a scratch tig?

@ifell3 Жыл бұрын

So is this just a current going through a carbon brush?

@TIGBrush Жыл бұрын

The TIG Brush uses a combination of heat, electricity and chemistry to clean and passivate

@joesezzz4324 7 ай бұрын

What's the cleaning solution what type of acid?

@stevenhawkes9471 Жыл бұрын

It's a nice machine but at $4000 it's a hard buy for most people.

@vo7sot Жыл бұрын

Use weld mashine to tig brush

@elkvis Жыл бұрын

"... Super comfortable to use." Only if you're not paying for it 😬

@moneerbader6589 Жыл бұрын

👌🏻

@dusankrivokuca5269 Ай бұрын

Try antweldcleaner,game changer ,200 ampers

@stephentyas4698 Жыл бұрын

amazing machine,makes a tiresome job so easy.

@Welddotcom Жыл бұрын

We agree!

@vo7sot Жыл бұрын

Use a welding machine😂 for tig brush. Russian used and work good. DCEN 25Amps + phosphoric acid, used in the food industry

@vo7sot Жыл бұрын

Or mig mashine 😆

@sibosifraiscompagny Жыл бұрын

Price is too high for what it is! My chineesse crapy weld cleaner does the same thing. For 300$ not 7000$. I also use surfox weld cleaner in the past and my cheap machine take less than 2 minute more to clean the tig weld you can do in a day.

@elkvis Жыл бұрын

Agreed. A bit of Scotch Brite goes a long way

@TJCaton91 Жыл бұрын

I also have one of those. This machine knocks it out of the water.

@TJCaton91 Жыл бұрын

@@elkvisunless you can't have marks on a finished product. Or if you're welding a few hundred parts. Application is everything.

@elkvis Жыл бұрын

@@TJCaton91 I'm sure this thing is great, and it clearly does what it says on the tin, but it's literally an *accessory* that costs more than a pretty blue TIG machine. That's excessive.

@arthurdeleniq Жыл бұрын

this mig shaped brush is probrably the only reason why i don't buy this it looks painful to use , they need to make a brush actual brush like thing this idea that welding companyhave to thing everything needs to look like a tig or mig gun

@tarvokallaste8327 Жыл бұрын

TigBrush is a great little machine but honestly extremely overpriced. I work as a welder/teacher for one of the biggest sheet metal fabrication companies in the world and we do this stuff quite often, however we use Italian made machines that cost about 75% less than TigBrush and do the job just as good. Not trying to hate i just think it's way over marketed and priced.