CLEO Scooter clutch assembly replacement| GY6 50cc

Рет қаралды 5,647

Күн бұрын

Welcome to Bazzar Repairs. A channel dedicated to the testing, review, and repair of various devices and electronics. In this video, I'll replace the clutch kit and variator assembly along with the drive belt.
www.amazon.com/gp/product/B08...
www.amazon.com/gp/product/B06...
Join our Discord @ BazzarRepairs Server
Telegram @ BazzarRepairs
If you would like to support Bazzar Repairs consider donating. We accept the following Cryptocurrencies:
Bitcoin:3Lm9vxiYXUMsaxPqonngGWHYzDUf33XYmU
Ada:addr1qxxxmx8u448vd96ktw2aknfjehuq6cqflln4c8ckqkk5s7t84yndmyn2f35mthkrcupn2mmsgyzpxydx5a4petpxfrgqaxvuhf
Ethereum:0xd8E9e74943F0f2b8604e6F18859455D4dFb344B0
LiteCoin:ltc1q3u7jlzv2cljl690zkz2thpedn0y3jr33qllfw2
Thanks for watching, please like and subscribe.
Twitter........... / bazzarrepairs
Instagram..... / bazzarrepairs
Discord.........BazzarRepairs Server
Telegram......@BazzarRepairs

Пікірлер: 14

@lennydetloff1031 Ай бұрын

Put one of the cover bolts back and use a screwdriver to place in the sprocket to keep it from spinning

@gordkilpatrick3451 2 жыл бұрын

I use the rubber handle on my pliers. Just wedge it between the housing and teeth. Works great to hold variator!!

@BazzarRepairs 2 жыл бұрын

Good to know thanks

@connectnreflect480 2 жыл бұрын

Front part is varriator. The rear was clutch. :)

@TophatTapdancin 10 ай бұрын

Do you have to put on a new gasket for the cover when putting it back together

@jaybone9 3 жыл бұрын

Here to see the kobalt xtr impact wrench in action 🙆🏿‍♂️👊🏿

@HarshSingh1 2 жыл бұрын

what bits did you get?

@Manwichman 2 жыл бұрын

Impact driver

@bobbyboombatz1489 2 жыл бұрын

I've used a piece of 2x4 works well and doesn't harm teeth

@BazzarRepairs 2 жыл бұрын

Great thanks

@tim196868 Жыл бұрын

Are you calling the rear clutch pulley the back brake? LOL

@leohobbleohobb3781 2 жыл бұрын

U should always use locktite on the bolts or nut,s.Why replace with the same shit does not make those better.They eat belts.Need a clutch assembly with harder torque /compression spring to get a tighter grip on the belt sides,if done the compression spring you change to can be a inch,is longer and max 5 turns with ends included.Roller,s that weigh more is needed to balance up for the harder spring at the back if you want the same.ish rpm up before the clutch engages. The standard carburetter on those come with no acceleration pump on them witch make them slow from start and can easy get the problem with engine bog down when throttle is moved fast up. They also eat belt do to the small diameter on front and back pulley to.Something to look out for when buying a scooter with CVT type gear

@BazzarRepairs 2 жыл бұрын

Thank you for the info