Dutch Clock, Needs a Bit of TLC

Рет қаралды 4,049

Cliffs Shed

4 жыл бұрын

Another clock for sorting out!

Пікірлер: 23

@TrPrecisionMachining 4 жыл бұрын

very good video..thanks for your time

@juanrivero8 4 жыл бұрын

This is one of the clearest clock disassembly vids on the net. Love clocks, built the Wilding wood clock. Needs some work. Also working on the Isaacs clock but this is on hold till I finish building my dividing head. Thanks for posting!

@CliffsShed 4 жыл бұрын

Thats very kind Juan, I have only built one clock from scratch, my own design, long time ago now, most definitely a labour of love, all the best with everything, Cliff

@Machine_NZ 4 жыл бұрын

Great video Cliff. So much work was in the making of these beautiful clocks. Well done for keeping them alive. Regards Kevin

@angelramos-2005 4 жыл бұрын

Very informative Cliff.Thank you for your work.ATB

@retromechanicalengineer 4 жыл бұрын

Great Cliff, I've never had anything to do with clock mechanisms so I learned a lot. My Grandad gave me a set of spanners just like that, they have a file and a feeler gauge for ignition points and were for overhauling magnetos. Best wishes, Dean in Oxfordshire.

@larrysmurthwaite773 4 жыл бұрын

Patience of a saint! I’d lost my shit and tossed it.

@BEGOTT3N 6 ай бұрын

Perfect

@MatthewTinker-au-pont-blanc 4 жыл бұрын

Left in a cupboard for a few year is the definition of "unloved"!

@CliffsShed 4 жыл бұрын

Are you trying to tell me my mum and dad DIDN'T love me! 😄😄😄 All the best, Cliff

@MatthewTinker-au-pont-blanc 4 жыл бұрын

@@CliffsShed No comment!

@RetroSteamTech 4 жыл бұрын

Thanks for putting this one up Cliff. Watching you take that apart is fascinating. I think your Grandfather's little spanners might magneto spanners. Looking forward to part 2. Cheers, Alan.

@CliffsShed 4 жыл бұрын

Thanks Alan, not least coz' I meant to put up part 2 at the same time,🤪🤪

@nikond90ful1 4 жыл бұрын

Thanks for the video Cliff. Interesting. Keep safe and stay well.

@CliffsShed 4 жыл бұрын

Thanks Colin, you too, All the best, Cliff

@tropifiori 4 жыл бұрын

I have never worked on a watch or clock that ever ran again.

@pddpup7767 4 жыл бұрын

Sir, you have patience !

@CliffsShed 4 жыл бұрын

Thanks, appreciate your time to watch and comment, All the best, Cliff

@davidjones6218 3 жыл бұрын

Hi Cliff, love the video.... I have just acquired a zannse clock with the same movement.. I've cleaned it all and oiled it.. But I cannot get the pendulum to swing.. I set it off but it just slows down and stops... Its on the wall level but nothing??.. I'm lost mate, can you help.