Another excellent tutorial video Bino! Thank you Blessings and aloha

I'm awful at remembering how to tie knots! I need the knot to tie a rope to my bird cage. After some searching I finally found your video. The double fisherman's bend knot looks like it's going to be the perfect knot for my project. Thanks so much❤

Digging your hoodie. Thanks for all the info! It's been a few years since I've climbed and I'm getting back into it. Really appreciate your videos

Excellent demo!!! Thank you!!!!👊

[Links] Figure of Eight @0:16 (Good stopper knot) Termination Hitches (for connecting to the saddle): Double Fisherman's Bend @0:36 Anchor Hitch @1:11 Buntline Hitch @1:35 Clove Hitch (End of Line) @2:04 (Connecting knot) Bowline @2:31 (Loop knot) Sheet Bend @2:59 (To attach two ropes together) Quick Hitch @3:29 (To attach two ropes together and send to climber) Knots to tie in the middle of the rope: @4:04 Clove Hitch @4:14 (Mid-Line) Alpine Butterfly @4:33 (Good loop knot and attachment knot) Footlocking Ascending Knots: Klemheist @5:12 English Prusik @5:55 Rigging Blocks Knots: @7:09 Cow Hitch @7:18 Timber Hitch @7:50 Running Bowline @8:54 Clove Hitch @9:34 (Using the End of the line) Hope that helps :)

Thanks!

Excellent. Important. Thanks.

ThX Bino :: I learn english and to climb / rope knots. Thank again my friend. Dl from France

Great video…well done and thank you

Great video very helpful 👍

Thank you both for doing this video. I am getting prepared to climb and cut a big dead branch so this will definitey help. Bino, I think there is a small typo in the title at second 14 in the video "Tree Experiance" -> "Experience" maybe? For the next video, Cheers ;)

Thanks Bino... Its useful

Good presentation Bino H 👌 🇨🇦🇺🇸

Excellent video, just a heads up on your sheet bend portion. The sheet bend you tied is the unsafe "left hand" variety. Tails need to be on the same side. Opposite sides is much weaker and less secure per lots of formal pull testing. Not that it's unusable, but much more likely to work loose and lower strength.

Hey man, you are good in explaining🎉

Thanks Bino .

Hi Bino, just wanna say thank you so much for making our life a bit easier. On the second note, is Double Fisherman’s Bend is your favorite termination hitch? Cuz you surely could’ve started with the Anchor Hitch which is a lot easier lol

I had an idea for a video and for new climbers for moving rope system, is put a split tail and Blake's hitch from hitch climber pulley above you friction hitch, then decent becomes a 2 step process. When weighted pull Blake's hitch down, then main friction hitch, but you only drop down till the Blake's hitch grabs,

The call my names in the sky!!

Good video everybody should know these knots

Great video Bino. Very clear and detailed! Whats the best knot to use with a blakes for ascending? If your using a double rope method.

Ty... Bino 💪

My head began overheating halfway through, but I will make sure I learn and remember all of these lol 💪

Thanks for doing these videos. I have learned so much. I have a question though, what is wrong with a double overhand knot as a stopper knot?

Bino H, have you tried the Sticht Hitch? Allows you to climb SRS with out the rope wrench. Really a game changer

Careful w/your Sheet Bend. You want both ends above (or both below) the knot, when done. Just flip your initial bight over. Double Sheet Bend is a good bit more secure.

Need a sweater like that in orange 💪🏽

I've never tied the sheet bend that way, so I was a bit confused. There are so many knots that can be tied at least two different ways.

Great video mate from Australia, a couple I didn't know and will try them out. Question: with the bowline, why do you finish the tail on the inside? I got taught to always finish the tail on the outside of the hole so that it doesn't get in the way when using carabiners on a bowline. I'm just curious. Cheers

Enjoyed the video.

Ok so ima just ask and try this a different way, im hanging a tree swing on one branch too high i cant climb and dont have ladder high enough, my board for the swing part has the 4 holes with my rope going through,i already cut them to be individually in each hole, not like lopped down through and up out other hole, and figure like a double figure 8 knott would be fine for holding underneath the seat board, but im unsure what exactly i should do for joining the two ropes from both sides, up to my two ropes coming down from branch, ive rifht now just have one giant long rope ide manged to get up ovwr the branch once, was thinking ide toss it up over a couple more times, then do same for second rope on other side, but what knott should i be using to combine the two ropes from the sides of my seat, and what knott should i use to connect the 2 sides of swing ropes, to the two coming down off branch? Think ive watched too many confusing knott videos and im all tangled trying to apply the knotts ive learned, i just dont know which will be the best.

Thanks for sharing this! Where do you purchase your ropes and what type / brands, please. Thanks, Steve

Thanks Bino. Where do I get that sweatshirt?

Great video Bino. I noticed on your intro to the video.... Experience is spelled wrong. You have it spelled as "Experiance". Don't shoot the messenger lol. Have a good day. 🙂

Question: why no stopper knots on the tail of termination hitches?

教えてくれてありがとう

What rope are you using in this video?

How many videos did I watch before finding someone who doesn't waste my time, What I want to know.

Experience or Experiance

The "double fisherman's bend" isn't a bend at all. It's a poacher's snare.

呃好喔

🇵🇬🇵🇬,..,

A Yosemite finish on the bowline is always advisable, 👍🪓🌲🇮🇪