Complete T Tops Reassembly Part2 (New Foam Seals,Trims Etc), Nissan Z32 300zx Twin Turbo Mega Build.

No video

Complete T Tops Reassembly Part2 (New Foam Seals,Trims Etc), Nissan Z32 300zx Twin Turbo Mega Build.

Рет қаралды 1,194

7 ай бұрын

Z32 300zx T Tops Reassembly, the Fairladyz's T Tops are being completely Reassembled after Paint. With all new Parts, Bolts, Seals, Trims etc. The Nissan Z32 300zx Twin Turbo Mega Build.
If you find my Content Helpful & would like to Buy Me A Beer, please do so, at the Link below.
Beer Money for The Aussie Shed,. Paypal: tinyurl.com/y6...
My Website that Carries some of the Parts I make. www.upperhandp...
Follow Me on
Facebook / theaussieshedd
Facebook www.facebook.c...
#theaussieshed #z32 #fairladyz #projectfairlady #300zx

Пікірлер: 30

@polishzx 7 ай бұрын

I would be shocked if anyone in the world has refreshed TTops as nice as what is seen here. Certainly some people will now after seeing these videos. Really impressive as always... Not sure how on earth you can disassemble this stuff "the first time" without completely ruining everything. I'd be hopeless! Thanks for showing us how its done.

@TheAussieShed 7 ай бұрын

Cheers Eric.🙂

@WayneCook306 7 ай бұрын

Getting closer by the minute Trevor, Great job, 👍👍👍👍👍👍👍

@TheAussieShed 7 ай бұрын

Thanks Wayne, sure is. Cheers Mate.

@roberthiggs7731 5 ай бұрын

Thank you Trevor, for saving me from wet knees!

@TheAussieShed 5 ай бұрын

my pleasure Mate, no worries.

@spazrock4u 7 ай бұрын

Trevor! I’ve watched all of your videos but never commented before. It’s become part of my Saturday morning ritual. A hot cup of coffee and Aussie Shed! Anyways, my Z was toasted in a garage fire in 2020 and I had to learn all this reassembly stuff myself. Sure wish these videos were around then! Would have made my life so much easier. If you ever come to the states and are in the Washington DC area for any reason, beers are on me!! Thanks for sharing your knowledge and experience. Cheers, mate.

@TheAussieShed 7 ай бұрын

My pleasure Mate, Cheers.🙂

@hakinen4000 7 ай бұрын

great video Trev. Love the explanations and details. Z is coming along pretty great. Looking forward to the next update

@TheAussieShed 7 ай бұрын

Thanks Rob, Cheers Mate.

@devons2gda 7 ай бұрын

Very well done Trevor, thank you as always! The car is coming along great! 👍🏻

@TheAussieShed 7 ай бұрын

Cheers Mate, yes its getting a bit exciting here.

@deeferdownunder 7 ай бұрын

As usual, top job Trev. Cheers.

@TheAussieShed 7 ай бұрын

Thanks Mate, Cheers.

@anthonymaster6160 2 ай бұрын

G’day. Thank you Trevor, for taking time and made this great video. I am an original owner of a 1991 300 ZX from 🇺🇸. Over the years, I had input in about 280,000 miles (450,616 km) of pure enjoyment on my Z. I am planning and in the process of doing researches to restore my Z back to its new condition. I have not driven the Z for many years now, it has been parking on my driveway and under a car cover. My daily car is a Lexus LS 430 and other cars. I have learned a lot from this video on how to restore the T-Top from you. Thank you again. Enjoy your beautiful Z. I just subscribed and thumb up. 🙏🫡🇦🇺🇺🇸 Back in 1996-1997, I spent a year vacationing (holidaying) in Australia. Love Australia. Beautiful country and nice people. 👍🫡

@TheAussieShed 2 ай бұрын

Thanks for the comment Mate, Cheers.

@bluetwirk300zx 7 ай бұрын

Amazing how to on the ttops Trevor! 😊

@TheAussieShed 7 ай бұрын

Thanks Mate.👍

@RestoHubAU 7 ай бұрын

T tops looking great after the rebuild and reinstall! Well done. Happy new year 🤙

@TheAussieShed 7 ай бұрын

Thanks Mate a happy new year to you to. Cheers.

@chriscorts3337 7 ай бұрын

Thank You. Superb job.

@TheAussieShed 7 ай бұрын

My pleasure Mate, Cheers.

@erictorres1365 7 ай бұрын

Great vid mate. Would love to know if you're gonna do a full engine build as well.

@TheAussieShed 7 ай бұрын

G'day Eric, at some point I have to strip down the engine to check everything & do a minor refresh. The Engine is meant to be reasonably fresh, the way its panned out so far though I'm expecting some issues. So basically there will be something, just not sure if it will be a complete build at this stage. Cheers.

@tkay564 4 ай бұрын

32:37 Did you have any foam cushions between these rubber plates and the painted tbar piece? I had and now i am wondering whether i should make new ones..

@chefswole 3 ай бұрын

Hello! Did you have to resurface your glass for T-Tops? if so, how did you do it? i heard you shouldn't because it's tempered glass?

@TheAussieShed 3 ай бұрын

G'day Mate, I scraped them over with a Razor Blade, they had some very stubborn deposits around the edges that took a lot of scraping to remove, then I went over them with "Chemical Guys Water Spot RX" on a Buffer.

@jamessbarker 7 ай бұрын

Do you still have the TT 370GT?

@TheAussieShed 7 ай бұрын

I do James, currently all I do is drive it. Nothing ever seems to go wrong with it. But yes, its still here lurking in the shadows, waiting to make a return.

@jamessbarker 7 ай бұрын

@@TheAussieShed that’s awesome, I’ve been following you past bit to do my gallery gaskets and so on. I’ve just gone big single turbo on mine glad to know you still have it