Рет қаралды 5,158
3D printing is a very cool technology, but it's always perhaps been a little too much on the "techie" side of things with machines being tricky to setup, or calibrate - as well as a whole slew of software to learn. But with the Sermoon V1 Pro, Creality are saying you can take it out of the box and print with - and you don't even need a computer, you can use your phone! Will this printer deliver, let's jump in and find out.
You can check out the Sermoon C1 Pro via via the following links -
1.Creality Official Link:
www.creality.com/products/cre...
2.UK Agent silverstream:
technologyoutlet.co.uk/collec...
If you liked this video and want to show your support please feel free to join my Patreon supporters here / currykitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it www.banggood.com/?p=E81211714...
If you want to look at other ways of supporting my channel, then check out all the ways you could help out here www.currykitten.co.uk/support-me/
0:00 Intro
2:38 Unboxing
5:45 Loading filament
9:26 Using the phone app to print from the cloud
13:21 Removing the print from the print bed
17:09 Looking at Creality Print on a desktop
19:23 Printing from the SD card
21:27 Looking at the contents of the included SD card
22:49 Changing slicer settings to improve print quality
24:16 Printing a spinner with overlapping/touching connections
25:18 Setting the printer up to print with TPU
28:00 First TPU print
30:18 Printing some iPhone cases in TPU
31:28 Conclusions