Cruwear vs K390

Рет қаралды 3,589

Күн бұрын

Battle of the tool steels Cruwear and K390 both are great steels but only one has what it takes to win.
#edc #camping #edcgear #fishing #pocketknife #tools #toolsteel #knife #steel #usamade #americanmade #bohler #cruwear #k390 #tough #sharp #versus #review
Patreon:
/ allthingsknives
Instagram: allthingsknives_2021
Friends Of The Channel:
Notyouraverageedc
/ @ericasedc
Bumblebee EDC:
/ @bumblebeeedcyt
Outpost76:
/ @outpost_76
MyBadd Adventures:
/ @mybaddadventures144
Tom Hosang Outdoors:
/ @tomhosangoutdoors9380
Brothers of the knives:
/ headhighinc
The Shredder Knife Reviews:
/ theshredderknifereviews
BGM Knives:
/ @bgmknives3087
Mitch Bollig:
/ @mitchbollig
Knox Knife Mods
/ @knoxknifemods

Пікірлер: 28

@southside1975 7 күн бұрын

Good job giving your opinion

@dan_taninecz_geopol 4 ай бұрын

Cruwear is near stainless so that's why it wins in my book. Living in the south I've seen D2 rust on shelves in outdoors stores.

@MacaroniDemon Жыл бұрын

Cruwear is such a great steel. It’s just about as easy to sharpen as S30v and hold a fine edge almost twice as long. K390 is also great. It holds a coarse edge forever and paired with the thinner Seki city geometry it just keeps cutting

@feralcruz2093 4 ай бұрын

K390 and cruwear are my favorite steels. Cruwear is on my beater knife, but i also carry a dragonfly in k390 for more precision cutting. I don't think i could pick one as my favorite though

@chrishynes6091 26 күн бұрын

That Para 3 is nice! Just got a Manix2 in Cruwear.

@HeadBassVTEC 11 ай бұрын

I am getting a K390 delica wharf as my dedicated cardboard cutter no steel is perfect, better to have more knives

@MegaSergey1989 10 ай бұрын

Have no experience with cru-wear but I can say that I absolutely love my endura in k-390. I absolutely love that it takes a toothy edge, many people I feel like don’t realize the meaning of toothy edge, that’s really what you want for most edc needs like cutting tags off t-shirts etc. and yes it strops back amazingly well! I personally don’t mind the fact that it’s not a stainless steel. Only other knife steel I have that even close to the edge retention is my pm2 in s110v which is a nightmare to deal with and doesn’t hold an edge as k-390

@Paul_Ironwolf 11 ай бұрын

Just got the Micarta handle Cruware PM2, used to have it before i lost it, was my favorite knife for a long time, i wonder if now after using some of the other stuff it will still feel the same.

@918M Жыл бұрын

The blade looks wicked cool

@timtim4525 Жыл бұрын

K390 is by far, to ME; a better super steel… yes, I said; by FAR!

@goodnessgraciousitellya5004 3 күн бұрын

If all K390 was heat treated in seki city and was available on more knives, I’d choose it hands down. I like it better, but it’s gotta be from seki city.

@johnblackmon4005 Жыл бұрын

Hey Fletcher, I bought Spyderco manbug K390

@stompbox64dtown9 11 ай бұрын

Under testing, Seki City K390 outperforms Golden K390.

@goodnessgraciousitellya5004 3 күн бұрын

The difference is drastic. K390 from Seki City is the best blade steel on earth imo

@SalvoEDC 9 ай бұрын

CruWear is a lot more resistant to corrosion compared to D2. Still not stainless, but better.

@allthingsknives 8 ай бұрын

I tend to use D2 as the benchmark as Crucible created Cruwear as a replacement for D2 and it’s one of the few Semi-Stainless steels that a lot of people have heard of. I will say it depends on the quality of the D2 I have a blade that my dad made in D2 no rust after 3 years while some of my cruwear blades are getting spots and some of my cruwear blades are spotless while some of my D2 is spotted. I would give an edge to cruwear though and that is most likely due to the CPM process.

@SalvoEDC 8 ай бұрын

Oh yes, most definitely! CPM process gives you better structure and improves the steel in every way. And yes, D2 is also very inconsistent. I have the same observations! @@allthingsknives

@rustytygart405 10 ай бұрын

Had to zoom in to see if you were talking about cruwear or cpm cruwear these are definitely two very different steels

@DuhYaThink Жыл бұрын

Refer too Dr.Fletch 🤔 I’ll read Dr. Larrin’s information on steel😊👍🏻

@DuhYaThink Жыл бұрын

DLT still has the purple cruwear all black hardware for $180 ish. Seki city is the was too go. Ok?

@DuhYaThink Жыл бұрын

I’d say k390 is ran harder. Imo. Ok?

@geraldkoth654 10 ай бұрын

I don't know about K 390 but CruWear is so bad for me I don't carry that Native 5 (my favorite knife) at all. Rex 45 and S110V are really good.

@DuhYaThink Жыл бұрын

I’d say k390 is tougher 🤷‍♂️both are great steels. Ok?

@SunGodLuffy_5 7 ай бұрын

Cruwear is way tougher wdym

@DuhYaThink 7 ай бұрын

@@SunGodLuffy_5 You are correct, my mistake 😅 I don’t know what I was thinking about when I texted that 🤔 guess my KZfaq handle applies to me 😄

@SunGodLuffy_5 7 ай бұрын

@@DuhYaThink you're good. Maybe you mixed up edge retention and toughness

@DuhYaThink 7 ай бұрын

@@SunGodLuffy_5 Think you are right. I have Dr.Larrin’s info screen shot and must have mixed it up. 👍🏻Merry Christmas bud, and a happy and healthy New Year to you and yours.

@SunGodLuffy_5 7 ай бұрын

@@DuhYaThink Thank you. Merry Christmas to you as well 😁