I added the link for the bank's twin ram that I installed Twin Ram amzn.to/2NdRZX6 Ultra Black amzn.to/3iiivwl If you buy from the link it helps my channel
Пікірлер: 39
@Somedads734 жыл бұрын
@bankspower this dude did you a favor and made a dope install video for us 12 valve guys!
@brandonm5828 Жыл бұрын
Side note this is the most helpful diy video I've ever seen on KZfaq
@CVcustoms Жыл бұрын
Thank you I really appreciate it !!!
@richardwelkiv83254 жыл бұрын
So far to date for me the most informed video for manifold install . Also thanks for the tip on valve cover gaskets . Will not tell you how long it took me to get those last two in the back !!!
@JC-gw3yo Жыл бұрын
I am new to the Cummins ,and this is a great video.. Lots of step by step
@onemanoperation54594 жыл бұрын
Best explanation! You just got another subscriber 👍🏻. Thanks for your time sir.
@angelbuendia43172 жыл бұрын
Best video I’ve seen and all well done
@oldironsfury4 жыл бұрын
Haha everything below is what I was thinking. Best install on the banks twin ram. Subscribed 👍👍
@CVcustoms4 жыл бұрын
thanks man I really appreciate it. I'm starting a build on a 2500 06 5.9 next week I would like to hit 600hp ..... just to see if i can
@oldironsfury4 жыл бұрын
CV customs nice man!! I’ll be watching! Great stuff ! 600 HP on a 06 looking forward to it !
@jeremyconner5295 Жыл бұрын
Nice video, I like all the fine details!
@CVcustoms Жыл бұрын
Thank you very much!
@TheRitchieLeeShow7 ай бұрын
Nice, just bought one of these. 👍 definitely
@brandona3253 жыл бұрын
Planning on this and their intake on my 98 in the near future. Hopefully will work with my future plans too
@brandonm5828 Жыл бұрын
I blacked out that gray plastic on my bumper it looks sweet after
@ohcrapwhatsnext4 жыл бұрын
I love the cummings....great power
@PPGDV4 жыл бұрын
Cummins are better.
@CrazyForCooCooPuffs3 жыл бұрын
@@PPGDV lol
@shanepeterson86799 ай бұрын
One thing I would add is, immediately after removing the intake plate stuff a couple clean shop towels in each intake port on top of the valves. Then some clean rags in the bottom of the intake manifold. You do NOT want ANYTHING to fall down in the cylinders. Once the gasket surface is clean and you're ready to pull the rags out I like to run my shop vac while I'm slowly taking the rags out.
@AustenARW4 жыл бұрын
Nice install and I agree with Richard, definitely the most informative video on KZfaq regarding the install on these. Did you notice any gains with it?
@CVcustoms4 жыл бұрын
Yes but we did the turbo at the same time so I can't say witch was more worth it
@Fun-under-the-hood Жыл бұрын
18 FOOT POUNDS!
@Daverodd062 жыл бұрын
Pusher intakes makes good shit
@mikeblack22793 жыл бұрын
Great video. I bought a 98 12 valve with this banks twin air. I’m having issues with the grid heater not working. Question - what did you do with the two ground wires for the grid heater?
@jesserasso10422 жыл бұрын
So you cheese 🧀 wiz the gasket to the cover gotcha
@Daverodd062 жыл бұрын
How did you clean off the gasket?
@danieldewilson3 жыл бұрын
The thing Im worried about is whether or not that silicon you added to your valve cover gaskets is heat resistant? What kind of mess are you going to have if it isnt?
@CVcustoms3 жыл бұрын
sorry I didn't point that out but I have been using it for years with no issues. not sure if it says it is or isn't.
@aaronnorthup49703 жыл бұрын
Will this work on a 92 12 valve? Planning on getting a new head for it so is that something that I can do to make it so it will work?
@CVcustoms3 жыл бұрын
Your injector lines will be in the way on the 92 ... if you convert to a p pump it will work no problem
@eugeneshillingburg58653 жыл бұрын
Hey man can you use stock style fuel lines with the twin ram?
@CVcustoms3 жыл бұрын
yes
@haydenerlandsen82952 жыл бұрын
Can you use the stock grid heater with the twin ram?
@CVcustoms2 жыл бұрын
yes
@JohnDoe-ud2cc10 ай бұрын
Did it make any difference, was it worth $600?
@easytopleez333 жыл бұрын
So you dont pop test those injectors before installing them? Well, good luck with that.
@jimsmithson29365 ай бұрын
is this snake oil or is it legit. what are the benefits
@Fun-under-the-hood Жыл бұрын
Dude you left out the most important part. TORQUE spec!
@CVcustoms Жыл бұрын
Sorry I made this video 3 years ago it was one of my first and you are the first to ask for torque specs