Your video angles, lighting, sound and overall instruction is spot on. Great job!
@DansWay Жыл бұрын
Awesome, thank you for the comments!
@jaijarrett9090 Жыл бұрын
Thanks for the detailed video. Now I am off to replace a blown fog light . (I got mine last year and I’m still learning the DIYs) I don’t have to ask my dad now😌 #independentdaughter
@DansWay Жыл бұрын
That’s greet. Go for it. Not much you could do to damage anything in the first place, so worst case you will just need a second hand at some point. Have fun!
@damonseeley8 ай бұрын
This was really helpful! Great camera work in a tight spot!
@DansWay7 ай бұрын
Glad it was helpful! That is one of my emphasies, to get angles that show what is happening as best as possible. Sometimes I don't have time time for it, but other times it is a fun challenge.
@tmaq97268 ай бұрын
Don't forget to mention to check the alignment of the light beam so you're not blinding oncoming vehicles
@user-ci1bg6nz8c4 ай бұрын
Thank you
@DansWay4 ай бұрын
You're welcome! Are you going to get some LEDs for your Highlander?
@Zeek8009 ай бұрын
Very good video. I knew about the panels you removed because I was adjusting the screw on the passenger side low beam and dropped the screwdriver. Guess where it landed. I’ve been looking around for a kit of push pins so that info is good as well. Thanks
@Zeek8003 ай бұрын
Yup same thing I did.
@Zeek8003 ай бұрын
On the 2017-2019 Highlander for sure, I’m not sure about other years, the fog bulb can’t be removed with the wire connector still plugged into the bulb. That’s because as your video shows, there is a “ plastic tab “ that prevents you from turning the bulb out or in with the wire still connected. I was struggling to get my old one out for over 20 minutes and finally went back into the house and KZfaqd another video. I think the guy is called “ Track Palmer “ and he mentioned the “ fabs “ that prevent “ the bulb turning . Went back out to my 2017 and it took 10 seconds to get the first bulb out.
@Zeek8003 ай бұрын
Come to think of it that Track Palmer guy has a 2016 Highlander so I guess it’s the same on the 2014-2016 as well.
@Gmar69 Жыл бұрын
I live in Idaho, and I don't drive much distances, but these are some nice options.
@crystalmarx2021 Жыл бұрын
I’m headed out now in 20 degrees weather to do my fog lights, hopefully it goes well. I replaced the H11 and high beams with LED Headlight Experts and what a pain in the butt. I can’t get the protectors back on the low beams the new LED are much bigger and have the kit attached. They also pulsate which is an issue, the company state’s warranty, yet it’s like pulling teeth. I purchased the extra clip pack as well. Now to figure out the side socket.
@DansWay Жыл бұрын
Let me clarify, are you saying you used a brand called ‘Headlight Experts’ for the low and high beams? I used Auxito and was mostly able to install the covers. They still bulge out a bit.
@elizabethcorral8267 Жыл бұрын
Thank you for a very good detail video.
@DansWay Жыл бұрын
Thanks for the comments!
@MrJuanS235 ай бұрын
🙏🏼
@MrJuanS235 ай бұрын
1:54 Do not skip this step, just as he does.😅
@DansWay5 ай бұрын
Yah, much harder to remove once the cable is out...
@MosesKamai Жыл бұрын
Very informative. Thanks!
@CurtisConkey Жыл бұрын
very detailed - much appreciated
@johns16464 ай бұрын
Is this a 2021? What size is the fog light bulb?
@joseochoa7043 Жыл бұрын
First off, awesome video man. Attempted to change my passenger fog light but was unsuccessful. Took off the fender liner, the connection but couldn’t take the light bulb itself out. I tried doing exactly how you did it and it wouldn’t budge at all. Any advice would be appreciated
@DansWay Жыл бұрын
If you got the connector off the bulbs, then I would try pushing in and rotating it counter-clockwise 1/8th turn. That should be what it takes to get it off. Perhaps try the other side and see if it is easier and teaches you something that will help get this one off.
@joseochoa7043 Жыл бұрын
@@DansWay Will do. Going to try again tomorrow. Thanks for replying and for your help.
@joseochoa7043 Жыл бұрын
@@DansWay Update: finally got it. Thank you for your help.
@princegorman2979 Жыл бұрын
Does the Highlander consume much fuel
@JayJay-cw3cg Жыл бұрын
The push clip 240 pc links to a flower scent thing lol
@DansWay Жыл бұрын
Oh man! 😂. What happened there??? I’ll fix it when I get home. Thanks for the comment!
@DansWay Жыл бұрын
Got that clip link updated! Thanks again...
@daveseeley4814 Жыл бұрын
I appreciate your videos, Question,, Do you also replace the 9005 headlight bulb also or just the H11
@DansWay Жыл бұрын
For the Fog I'm just replacing the one bulb, the H11 one. For the headlight, I have a separate video showing that replacement here: kzfaq.info/get/bejne/jrSHoKpyxuC5aZs.html&ab_channel=DoingThingsDan%27sWay
@raviporan Жыл бұрын
Hi there, I am trying to replace my 2016 Toyota highlander XLE fog lights ( halogen) with LED. Is this the right product to order? H11 H8 H9 LED Fog Light Bulbs, Fanless Design, 6000 Lumens 6500K Cool White
@DansWay Жыл бұрын
Hey there Ravi! For that make/model, you can use the following: White color = geni.us/2016_wht_fog_hylander Yellow color = geni.us/2016_yel_fog_hylander
@caryr5526 Жыл бұрын
GOOD VIDEO DAN… but YOU did NOT even MENTION the BULB NUMBER, such as H-11 or 9005. PERHAPS NEXT TIME YOU SHOULD and I RECOMMEND USING DIELECTRIC GREASE for ANY ELECTRICAL CONNECTIONS to HELP RESIST AGAINST ANY CORROSION, especially with WATER SPRAY from DRIVING!!!
@DansWay Жыл бұрын
Thanks for the comments. I have the bulbs in the video description you can just click on. I agree that bulb-grease is always a good idea as well.
@PeHtr2 жыл бұрын
How do I know if my high lander has the aura to change to LED fog light bulb ??
@DansWay2 жыл бұрын
Hey there. I'm not sure I understand your question. Are you asking if there is enough area behind to get to the bulb? or are you asking something else?
@PeHtr2 жыл бұрын
Hi , No my question is. If you need some kind of xtra wire when changing normal to LED, because the LED get hotter and more charge , you would burn the wire, After a while
@DansWay2 жыл бұрын
Ah, ok I understand. These LEDs do get warm, but honestly they do not get as hot as the original bulbs. They have the heatsink to spread out the heat. The wire and connector don't get burned at all.
@BS-ic2hb Жыл бұрын
@@PeHtr LED's will have a lower amperage draw to the comparable halogen it replaces. The factory bulb is probably a 35w consumption which would be .29 amps and a 5 watt LED will be .041 amps. Extra wire is not needed, and a LED will burn cooler than the halogen. Do not use LED in areas where you need heat to melt snow/ice off your lens cover.
@ryanlogan29119 ай бұрын
I did this on my sisters Highlander and it was almost like wrestling a fat girl.
@I-LOVE-EARTH7 ай бұрын
It is 100% illegal to put LED's in the Low/High Beams. Period...now way around it.
@ryanh82817 ай бұрын
That is 100% incorrect
@I-LOVE-EARTH7 ай бұрын
LOL! Try doing some research and read: FMVSS108 There is currently no provision within these regulations to legally replace halogen headlamp bulbs with retrofit LED bulb replacements. As a result, retrofit LED bulbs may not be used in headlights on public roads in the United States. @@ryanh8281
@I-LOVE-EARTH7 ай бұрын
Wrong.@@ryanh8281
@guymann40165 ай бұрын
Go away.
@christopherjamesrussell5 ай бұрын
It’s 100% illegal for women to drive while wearing housecoats in California. It’s 100% illegal to walk a camel down Palm Canyon Drive in Palm Springs between the hours of 4 and 6 p.m. In Alabama, wearing a fake moustache in a church that causes laughter is 100% illegal. In Georgia, tying a giraffe to a telephone pole or street lamp is 100% illegal. In Vermont, it is 100% illegal to paint a horse.