Clipster cow clippers in for repair, as well as some Bosch, Dewalt, Paslode and Makita tools

Рет қаралды 53,369

8 ай бұрын

Wouldn't be a days work if I didn't get a bosch grinder in for repair. Not that they are bad, more it's simply the number of them sold here. One engineering company, along here, has bought 100 of these grinders. They are very popular.
Paslode service and dewalt gun problems are simply bread and butter. They are are in here day in day out.
Paslode due normally due to age and dirt, dewalt due to some part wearing out or braking.
Animal clippers I only ever get in the odd time, but they are normally very easy and satisfying to work on. They never come in this clean, normaly the hair and s@*t and falling of them.
But dung and hair is easily cleaned of. And it's only a bit of s#*t at the end of the day.
The makita Grinder is actually a GA9060, a model I have never seen before. Funny enough, I have never had these brushes before either, and I thought I had ever makita brush in stock.
The brushes are now ordered and will be in next week, so I can not finish that one till then.
#makita #bosch #dewalt #paslode #clipster #cowshears #cowclippersrepair #clippers #clippersireland #tools #repairs #powertools #repairathon #workshop #repairshop #toolrepairs #toolrestoration #realtime #fixingtools #asmr #drill #toolproblem #fixbrokenstuff #restoration #toolrestoration #powertoolfix #deandohertygreaser #repairanything #makitafix #dewaltfix #boschfix #fix

Пікірлер: 39

@davetaylor4741 8 ай бұрын

Found your channel recently. Absolutely fascinating. Having been a Carpenter/Builder for the last 42 years. I have had my fair share of tools repaired. And also worked on a lot myself. The last 25 years I have lived and worked in Australia. The problem in my area is there are hardly any repair shops. And the ones that exist can't find the skilled workers. There never seems to be any parts. And if you put a tool in. Kiss it goodbye for many months. No parts, and you may never get it going again. Often they come back with a big bill. Either still not working properly, or worse than before. Nail guns in particular. Lovely to watch someone that tackles all sorts. And knows what he is doing. Long way from Oz to Ireland.

@edwardlogan267 8 ай бұрын

The long videos are great, names like "a whole bucket" or "a whole pile" are good titles

@emilhristov2308 8 ай бұрын

The ease of assembly/disassembly and the confidence he approach all those different tools, make me think that there is no tool out there, that was not serviced by those hands. Great job.

@Ben-iw5tn 8 ай бұрын

Discovered your channel a week ago or so and quickly became addicted. Love the amount of detail you spend on explaining the errors and how to fix them! Keep up the quality work and greetings from germany!

@sergaljesus 8 ай бұрын

I love these new longer format videos you've been doing lately

@frankdelucey2137 8 ай бұрын

I have seen a lot of tool repair videos. But none go into the detail that you do. Thank You for showing everyone how to repair the tools that we rely on. Cheers from Pennsylvania USA

@deandohertygreaser 8 ай бұрын

Thanks 👍

@tonybr2469 4 ай бұрын

I’m amazed at how they design these tools but I’m gobsmacked how you repair them and reassemble them ? Much respect dean a true master of your trade

@brockcamps4972 4 ай бұрын

"This is the awkward bit" bang, 2 seconds later. Incredible. 😊

@tamask001 8 ай бұрын

The promo: "Torture...a lot of work for a tiny piece" The movie: disassembly in 45 seconds flat

@deanstones6773 5 ай бұрын

I found this channrl a few weeks ago & cant stop watching it using quite a few of the tools you repair males me wonder how many ive took kn over years were ghey just say youd be better buying a new one that ive watched you repair with no problem real expert 👍

@DiscountSasquatch 8 ай бұрын

At this point, I think Dean can field strip and reassemble a grinder blindfolded.

@gene80shits 8 ай бұрын

mesmerizing to watch the way you disassemble the tools and find the problems straight away. my question is... how the hell do you remember to put it all back in the correct order?

@thedevilinthecircuit1414 6 ай бұрын

The blinking light on the Paslode is probably due to the battery being an off-branded pack. I've run into this same thing with tools and laptops giving a warning about a battery problem even when everything else works fine.

@paulelstone2043 8 ай бұрын

discovery of my life simply fantastic

@badzioch64 8 ай бұрын

Grease in a syringe is genius

@deandohertygreaser 8 ай бұрын

Very useful. They animal dosing syringes

@0rtmasta 8 ай бұрын

Thank you for sharing your incredible knowledge with us mere mortals or some shit. Thank you!

@colinwilliams9290 6 ай бұрын

Really enjoyed this one and I don’t even own a cow😂

@thedevilinthecircuit1414 6 ай бұрын

What are you waiting for?

@onemoredeadman 8 ай бұрын

I bought two knock off batteries for a Paslode bradder I have, one battery makes the red light come on all the time but works fine

@ManMountainMetals 7 ай бұрын

Just replace the red LED with a green one.😂 easy peasy.

@Drottninggatan2017 3 ай бұрын

Interesting to see that sheep shearing machine. It does look like the older style Heiniger head on that one. If so then it should be good quality. But the gear is not the same. Checking it up, here in Sweden these machines are sold for 400 euro. That is at our primary place to get sheep shears. People who bought this machine also bought, guess what? The gear. Obviously that is the weak point. If folks are hogging down on dirty cattle with it the gear sure is going to break. Neat trick by Heiniger perhaps. Letting others use their old head, but making it breakable, so next time they will get the genuine machine.

@jonnyduncan7056 7 ай бұрын

Great explaination and methodical repair.. Very addictive

@chris_hertford 8 ай бұрын

Always preferred Bosch tools, but their grinder switch is terrible aways struggle especially if I've got gloves on! I realise its a two stage switch for the inrush current but the likes of DeWalt etc cope fine with a regular trigger style!

@williammorris3303 8 ай бұрын

Idk if you answer questions but here goes. I’m a contractor who has used dewalt predominately for a decade or so. What are the most dependable, best built tools in your experience

@rossnolan2883 8 ай бұрын

Fantastic 😊😊😊

@davidburgess3560 8 ай бұрын

You been to do a video on setting up and serving the cattle clipper

@magnusnielsen2648 8 ай бұрын

no pin intended :D

@rawcus918 6 ай бұрын

The fake battery on the last nail gun probably doesn’t have a temp sensor on it like the normal ones do. That’s what is causing the red light.

@gacherumburu9958 6 ай бұрын

👍👍

@magnusnielsen2648 8 ай бұрын

it should come with an extra button

@denisconor648 8 ай бұрын

Like to hear them clicks.

@zinouninedin336 8 ай бұрын

🇩🇿🇩🇿🇩🇿👏👏👏👍👍 ا الجيري

@williammorris3303 8 ай бұрын

Nylon is nylon but let’s call a spade a spade, it’s plastic.

@cinderswolf3929 4 ай бұрын

can you add a ling to your shop somewhere

@paulchapman5249 8 ай бұрын

Sorry to say this England is not England anymore I am English but have less rights than immigrants does not make sense

@rogerburn21 6 ай бұрын

Clever man where did you learn all this

@PTcruser65 8 ай бұрын

#500 Like, What did I win? and it better not be one of those tools you cant fix. No Makita, no Matabo, surprise me. love from Canadas West Coast, not from the stinking good fore nothing east coast.