Death By Clutch! Ford Tractor Hard Start

Рет қаралды 291,732

6 жыл бұрын

A Ford 1910 tractor needs a clutch, and a glow plug for good measure.
debossgarage.com
Merch, Tape Boss & Car Parts debossgarage.com/store
Tools I like kit.com/debossgarage/dg-toolbox
Show us your build project debossgarage.com/drivetribe
Help us make awesome stuff / debossgarage
Twitter / debossgarage
Instagram / debossgarage
Facebook / debossgarage
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Пікірлер: 189

@ziptiesnbiasplies 6 жыл бұрын

What a sassy pants little tractor! nice work bud!

@Cole-mc2cy 6 жыл бұрын

ZIP TIES N BIAS PLIES fuckin right bud

@rustybrowneye 6 жыл бұрын

ZIP TIES N BIAS PLIES fuckin mint

@ziptiesnbiasplies 6 жыл бұрын

fuzzy wuzzy fuckin eh fuckin mint!

@averystilwell9054 6 жыл бұрын

Zip ties n bias plies what's up with another video??

@devin3156 5 жыл бұрын

ZIP TIES N BIAS PLIES my favorite KZfaqr, let’s get some more slave lake thrashing eh?!

@swampsofhome 4 жыл бұрын

This video made me confident enough to undertake replacing the clutch in my Ford 1710. I've never done it before, so I sweated all the details you take for granted. However, the one thing not covered by the service manual is the adjustment of the clutch fingers and THAT was where you lost the footage! To you that's just another detail - to me it's critical. I think I've got it right so I'll put it together and see. Thanks for posting.

@michaelf.2449 3 жыл бұрын

My shop class completely restored one of these new paint, cleaned up all the original bolts and fixed up the mechanics on it and God that was such a simple tractor

@acme855 4 жыл бұрын

You da man. I so enjoy watching you work, so inspiring. You helped me out on buying a dodge Cummins. Thanks

@murrayhalbert2988 5 жыл бұрын

WOW! Thanks for the memories. Having worked for a Ford farm equipment dealership from 1980 to 1990. I assembled, PDI'd and did repairs on those thousand and thousand ten series tractors. I loved those little Japanese diesels, the tractor units never broke down, it was all the added American crap that kept me working on them. OOPS actually had to fix a 1910 once, some bright American engineer thought that a backhoe and loader attachment was a good idea without a connecting frame, split the transmission case . I liked the comment about hydraulic actuated clutches,never had one on those tractors, either a normal manual trans or a hydrostat, ya gotta watch those off the cuff comments. The next Gen had the shuttle shift, wait till you get into one of those. Keep up the vids man

@I-Dragonwrath 4 жыл бұрын

Your description of the situation you had with the 1910 sounds similar to what I'm dealing with. I inherited a 1900 with a bucket and hoe. Completely empty of hydro fluid when I got it home. Filled it and found the leak. The mating between the clutch housing and trans has a gap starting from the top that tapers to nothing at the bottom. Can actually see light through... Hydro oil flows freely from the gap about halfway up the trans. Hoping I can split the machine and close the gap. Any advice you may have on the situation would be hugely appreciated.

@straight4.646 6 жыл бұрын

I appreciate what your doing with these videos so much because it helps a lot of younger people like myself. Sincerely thank you so much hope your having a great one

@vernonbear 6 жыл бұрын

In my life there will be precisely zero opportunities to put this knowledge into practice. Whilst I am an HGV driver I rarely bother any of the mechanical aspects of the vehicles I use (other than daily checks and the like) and yet here I am hooked on Deboss videos. Love the subject matter and your commentary and description is superb. Long may it continue!

@ericmatt2368 4 жыл бұрын

great video....just got an 84 Ford 2110 that needs a clutch...the 1910 seems pretty similar so this video is helpful beyond words! Feel like maybe now I can get it done . thanks

@thegreenerthemeaner 4 жыл бұрын

I had a 2110 4x4 once. The clutch went away very suddenly. Wasn't the clutch, the thrust bearing on the crank went. That is when I found out about the quality of the Shibraura engine. I traded it off. The whole tractor was a turd.

@kylewilson3861 5 жыл бұрын

love your tractor repair videos

@herculesinwyoming 6 жыл бұрын

Thanks filthy rich ! I’m experienced but always ready to learn more

@nissanswin684 6 жыл бұрын

One quick and dirty tip, stuff bread into the bearing to keep the grease from seaping through the bearing. The bread provides some grit to the situation to keep the grease doing its obon the removal. Thanks again for the amazing videos you provide.

@Wreckedekcoupe 6 жыл бұрын

I enjoy your tractor videos like this! you give me confidence to do a clutch job on my case 5250. i never split a tractor before, but have done clutches in cars and trucks. The job doesn't seem to bad just need to get a nice jack/dolly to roll the back of the tractor back.

@bigboigamer4302 2 жыл бұрын

didn’t understand what you meant when you said “split the tractor” until he literally pulled the tractor into two halves.

@bjrn-steinarhanssen2102 4 жыл бұрын

Perfect video. :) Bought a 2120, and seller said: needs clutch pedal adjustment. Now i Know ;) Even if the clucth is gone, I can now do the job myself!!! BTW, I always are swearing, and bleeding, when repairing Euro Fords, but this tractor is a rebadged Shibaura, from Japan. Much easier to understand, and work on.

@davidhoekje7842 6 жыл бұрын

Ave did a neat trick to drive out a blind bearing driving greasy paper towel into the hole with a punch. Same idea as the grease but it didn't rely on the seals holding the grease back. Might work for the pilot bearing.

@moneypitautoperformance8983 6 жыл бұрын

David Hoekje or bread

@3347861 6 жыл бұрын

I'm spoiled... Have a metal lathe/mill in the shop. If need be I machine a close fitting stub shaft and use it with grease.

@patriciomunoz2830 5 жыл бұрын

@@moneypitautoperformance8983 bread works way better

@isaacsprenger9940 4 жыл бұрын

David Hoekje I’ve used a bar of soap cut up and punched in there, a lot cleaner than grease, falls right out in a powder when your done. Heck even gets your machine a clean soapy sent!

@Capt.Morgan 4 жыл бұрын

That’s so awesome that you have Jesse Coombs in you ending

@ctbfalcon 4 жыл бұрын

Davey Jones that is cool! It's cool Debussy got a chance to meet her. RIP Jesse

@captainkayakdiver6693 10 ай бұрын

Learned a trick from a friend! Use fresh white bread centers puss into main bearing it will push it right out. With no mess.

@enriquefernandez1639 3 жыл бұрын

how you doing this morning Deboos garage How I can take it the gas tank Ford tractor similar like this one you got it I'm changing the clutch two how you don't know I have to take it out the thank 2 thank you for the good videos you got it👌 I really appreciate it so you give me any idea

@djc613vlogs9 6 жыл бұрын

I have got a ford 1910 with a cab and loader and it is one of the best tractors I've had.

@mikeymcmikeface5599 4 жыл бұрын

Who actually cares?

@gasperajdnik5627 3 жыл бұрын

@@mikeymcmikeface5599 I care.

@Ubique799 3 жыл бұрын

Iv got one to mine starts poorly to. The glow plugs are not fully home? I think I will tap the threads and put new plugs in to see if that helps?

@jacobfraser7967 6 жыл бұрын

paper towel jammed in the pilot bearing with the grease works good too

@billygreenhorn9275 6 жыл бұрын

Nice little tractor

@PAFarms 6 жыл бұрын

Nice video. Love the equipment videos

@kurtgreenwood5530 5 жыл бұрын

Love ya work man!

@Erated78 6 жыл бұрын

Great vid Rich, I enjoy the equipment repair vids. Thanks

@oby-1607 4 жыл бұрын

We were moving some logs around with the JD 2140 and the clutch went. What a god-awful job that was. Nephew and I had some fun getting that back together again. We had to do it where it failed as we couldn't get it out of where it was stuck.

@bababooey7576 6 жыл бұрын

The throttle lever...I remember that on the 1987 Ford tractor we had at work. That sound....I remember the other students would never heat it enough and it'd be so cranky even in the warmer weather...love it. It got stolen 20 years ago the Friday night into this labour day weekend. Such a nice tractor to drive and I remember the clutch pto set up too...

@alexsheppard8331 3 жыл бұрын

That's some pretty advanced stuff for 1910.

@Zehn-X 3 жыл бұрын

1910 isn't the year, it's the model number

@BarnStangz 6 жыл бұрын

That thing is CLAPPED!

@henryrobinson9837 4 жыл бұрын

ever use light bread to get a pilot bearing out? old mechanic taught me that trick 40 years ago

@johngilson8820 4 жыл бұрын

Very cool video. Wish I had seen this sooner. Just rebuilt the shibura diesel in a Ford 1910 this summer. Not the easiest motor to work on and expensive. Hardest part was getting it back together at the end with a new clutch. Ended up re-splitting it to adjust clutch fingers. Ended with about $2k US in parts and machining. Lift cilender seal is the next project for it.

@jwint563 4 жыл бұрын

John Gilson I’ll be doing the same on my 85’ 1910 next winter. Any tips? I’m going to do the easy way with new sleeves, rings and rod bearings.

@osuevans86 2 жыл бұрын

Where did you get your clutch parts from?

@johngilson8820 2 жыл бұрын

@@osuevans86 I got discs online at yesterday's tractor. Been working good. Has a couple hundred hours on the rebuild and clutch

@bigchike350 6 жыл бұрын

FYI, Never do that release bearing trick on a LS engine, There is a freeze plug on the end of the crank.

@fgialcgorge7392 6 жыл бұрын

Man, I have loved your channel fir years, just wish you liked Fords. But to each his own. Still a great channel and great info.

@Michagan_outdoorsman_James Жыл бұрын

i enjoy these old tractor videos i just got out first tractor 1986 ford 1910 w/loader 4wd and guess what..... it needs a pto clutch its grind city. oofta and fml, be my first time splitting a tractor but pretty confident i can do it, i know you are out there coyote swapping broncos and living the best life but man it would be cool to see some more heavy machinery or tractor stuff. maybe during the winter slow season or something, a big hello and howdy from us Michiganders.

@TheRustiestShackleford 6 жыл бұрын

How to keep the grease from going through the bearing: stuff little wads of cloth or cotton in with the grease.

@chrisrmathews90 6 жыл бұрын

Jonathan Moorhead or use plain old bread no joke.

@MadMaxx570 6 жыл бұрын

+1 on the bread! Works minty!

@cornwasher 6 жыл бұрын

I had one of those 1910's and in the winter it started easily because of a block heater and a freshly charged battery.

@_P0tat07_ 4 жыл бұрын

Yup! Starts like a ferd! But it sounds good once it’s running.

@gasperajdnik5627 3 жыл бұрын

Good video rich 👍

@StoneColdStrah 4 жыл бұрын

i like the machine you work on its interesting

@brianmcmanus57 4 жыл бұрын

Another good truck for the pilot bearing. Is to put some bread in the hole and hit it with the punch, it works like grease but will not slip through the bearing like grease.

@morgansword 4 жыл бұрын

Nuts, I thought I had seen all the oldies but good for humor videos. Got my like though

@kelvinjohnson8939 6 жыл бұрын

Man I love the way ford tractor sounds

@davekulman8195 5 жыл бұрын

Dude try wet toilet paper for the pilot bearing always works great and alot cleaner than grease or bread my grandpa taught me that and I've got every bearing out every time

@markbuilt 5 жыл бұрын

I m sure your the guy I need to start an old Johne Deere 440 skidder and maybe a \\\\\\\\f800 Ford farm truck like your videos nice work

@neogrosz 4 жыл бұрын

You need a more viscous fluid for pushing that bearing out like that, bread works pretty good for that trick. Just make sure you know what it’s pushing on on the other side of the bore; I.e. the frost plug someone else already talked about in other applications

@sketchyatbest9391 6 жыл бұрын

if you warm up some irish spring hand soap and do the same "grease trick" with it, it works just a little bit better

@RobertKohut 6 жыл бұрын

Nice!

@coldstartdaily9738 4 жыл бұрын

i use bread to remove the spigot bearings from cranks

@bryanwelton1442 6 жыл бұрын

Try a peace of bread next time to pull pilot barring same idia as greeze but with bread. heals work the best, less messy also

@jamesmoore3346 4 жыл бұрын

Spemt 16 years twisting wrenches as a tractor mechanic, primarily on Ford and John Deere but worked on every brand made. Had a guy ask me if there was any brand I wouldn't work on, I told him the ones you can't get parts for.

@CloudHindlen 5 жыл бұрын

I use a piece of bread and a socket or piece of metal tp drive pilot bearings out. Works wonders...and is way cheaper and cleaner than using grease.

@Mrcrowntown 6 жыл бұрын

Newspaper strips in water works for getting out a pilot bearing.

@pophamlarry 3 жыл бұрын

What? Im so disapointment as your fellow Canadian ave would say....no cuss words while working on a Ford? Lol Great Job Bro! I always enjoy your videos... keep up the great work....😁

@mountain177 5 жыл бұрын

White bread works good for pilot bearings

@cornbreadntatersalad1634 4 жыл бұрын

I have used white bread with varying success on pilot bearings

@michaelovitch 6 жыл бұрын

Valves needs to be adjusted.(every 1000 hours) with new glowplugs it should start right up. It's an indirect injection engine, it shouldn't cranck that long,unless the compressions are bad. manual : file:///F:/Documents/T%C3%A9l%C3%A9chargements/b65f4fac-f5b6-4bb4-b771-1d93a00c945f.pdf www.tractordata.com/farm-tractors/005/9/3/5931-ford-1910-engine.html

@mikefedele4521 6 жыл бұрын

Job looks like it went well. I am not big on the pilot bearing they use even the new ones have play in them it is crazy what machine shops charge to do a machine flywheel. I use the grease trick but I use a green tree branch and a hammer I have had good success that way. Great video and I no like ford's....

@pjf1313 6 жыл бұрын

Hey, ya wanna do my '83 2110?!! Just one extra shaft to line up... Same bucket set-up.

@wyattr98 4 жыл бұрын

The grease trick you used I've heard works better with cheap white bread instead of grease but I haven't tried it yet

@silassmith354 4 жыл бұрын

The "BOSS"

@billmoran3812 4 жыл бұрын

Those old Ford tractors had a timer that would shut off the glow plugs after so many seconds. The timers were known to fail, so you might not have had operating glow plugs after they were replaced. I’ll bet the valve lash is way off too, they are all manual.

@iand720 6 жыл бұрын

use bread instead of grease to pop out the bearing. Just pack in little chunks until its full and use pretty much the same process. Wont come out through the bearing and it comes out as a big ball at the end, nice and clean

@throttlebottle5906 6 жыл бұрын

BACON!!!!

@EhBrokenToaster 5 жыл бұрын

instead of grease use wet newspaper/printer paper torn into little peices and shoved into the pilot bearing.. did that on my 6.5 and the paper compacts into a small little bullet looking pellet that you can get out very quickly with something like a dentistry pick

@triggeredmonkey3439 3 жыл бұрын

The next time you have pilot bearing this difficult to remove and grease doesn't get it. Mix the grease with a disposable shop rag in 1/2" strips. This will still allow you to pack it in the hole and it's fluid enough to spread out behind the bearing and push the bearing out without coming back through the bearing cage. Sometimes you have to bump it up and actually use a cotton rag but that's on a really persistent bearing

@740tuners2 6 жыл бұрын

I have one of these ford 1910s with only 1900 hours on it

@pfow2006 4 жыл бұрын

I'm loving the tractor video's

@bjammin1387 6 жыл бұрын

AVE method! it’s been said a few times but cloth strips in the grease

@om617yota8 4 жыл бұрын

Man I laughed so hard when you were counting off how many cylinders had lit off.

@gergatronic 4 жыл бұрын

Instead of grease (tried and failed as you did here), I have heard that bread dough works wonders

@ArcticAstrophysics 6 жыл бұрын

The music when the tractor went back together lol

@mopartshemi 6 жыл бұрын

use bread next time for that bearing less messy

@isaach3438 6 жыл бұрын

Wet toilet paper works good for getting the pilot bearing out too

@karterjohnston1981 4 жыл бұрын

It's better to use a bar of soap because it's still a type of Greece but it solid

@jdla140 6 жыл бұрын

Does it glow while cranking because it has a "thermostart" as well as the glow plugs? A lot of the little foreign tractors I've seen have thermostarts, sometimes they have both glowplugs and a thermostart.

@AMCguy 6 жыл бұрын

Zip ties n bias plies

@BillyBob-fd5ht 3 жыл бұрын

working on Tractors pull a few bolts pull apart

@Hammerjockeyrepair 5 жыл бұрын

when grease wont get it out, Ive used paper rags and white bread!

@johnmorris7960 4 жыл бұрын

Maybe it's just me but with the condition of the old clutch, I would have definitely installed a new rear main seal. I do that everytime anyway even if it belongs to someone else. I would also put in new pto seals at this time. Too much work breaking a larger tractor apart to skimp for a few dollars.

@johnpossum556 6 жыл бұрын

Repeat!

@DEBOSSGARAGE 6 жыл бұрын

yep it's a reupload. sorry for the double notification!

@lawrencepage2682 5 жыл бұрын

what you doing with that towable manlift at the end of the video?

@throttlebottle5906 6 жыл бұрын

thinking a blind hole bearing puller have been so much easier :)

@codyallan18 3 жыл бұрын

Have a Ford 1510 and out of the blue it won’t move shift though the gears no problem but will not move after I let out on the clutch?

@joelrunyan1608 5 жыл бұрын

use soft white bread instead of grease to get that pilot bearing out same meathod.. just use wadded up bread instead of grease... cleaner too

@codys9606 6 жыл бұрын

That's a shielded bearing, not a sealed one. Naturally grease can go right through.

@swampratt36 5 жыл бұрын

Use grease with a few scraps of paper in first .Old timers tip

@curtis1105nsc 4 жыл бұрын

You know I tried the grease trick on an old Toyota I had, but the grease didn’t work. Must not have been thick enough. What I ended up using was white bread, using the same process and sure enough it worked

@bulkchart3239 4 жыл бұрын

wow! i saw jesse combs at the end. was she on an episode?

@TheSmreeder 6 жыл бұрын

QUICK TIP; next time add some toilet paper w/ your grease... you will be amazed Kleenex works too ...Lol Many Blessings , SMR

@stephenpigman9166 Жыл бұрын

So does the front clutch plate just stay loose until the pto is engaged??

@sasquatch6ft9 Жыл бұрын

where are you located? im looking at a 1910 and wondering if you could look it over

@WatchWesWork 6 жыл бұрын

Pre-combustion motors never start for shit in the cold.

@michaelhunt8600 Жыл бұрын

Hi I have the same tractor where can I get a new clutch from? Thanks

@lukebecker1959 4 жыл бұрын

I have a Ford 1510 tractor the clutch does not work for the PTO

@normanschupp485 3 жыл бұрын

Instead of using grease try bread instead it works the same without contaminating your clutch surface

@pcwizzy460 6 жыл бұрын

Old Fords are better, that's why you don't swear on old Fords, but you do on new!!!!

@shamblershamfam3597 5 жыл бұрын

Good lord. Is there anything he doesn't know how to fix?.. every video makes my head swim.

@alwardsengineering6561 4 жыл бұрын

I use some bread when I takem out

@STRGHTSXBNZ 6 жыл бұрын

That green mold though...

@mili9068 4 жыл бұрын

You forgot the bread 🤣 thats the one so the grease dont escape😅

@mikeymcmikeface5599 4 жыл бұрын

umm... okay

@jamessmith7691 4 жыл бұрын

Those Fords should have a clock just for the starter.

@cathandstad941 4 жыл бұрын

use soap bar for getting pilot beiring

@willcojak9650 4 жыл бұрын

I had a 1310 it was a dad thing.