FORGE TWINTERCOOLER INSTALL on the Mk5 GTI

Рет қаралды 24,051

2 жыл бұрын

Forge Twintercooler Install on my Mk5 GTI Project!!
Thanks to Forge
www.forgemotorsport.co.uk/
T-Shirts and Hoodies!
decimaltenths.co.uk/dtmerch/
Check out our NEW Website:
decimaltenths.co.uk/
------------------------------------------------------------------
Follow us on Social Media:
Facebook : / decimal-tenths-3627335...
Instagram: / decimaltenths
------------------------------------------------------------------
The camera I use in the garage:
amzn.to/2Up9Vmf
The camera I use outside of the garage:
amzn.to/2UoD1SF
A selection of the tools I use:
1/2" Torque Wrench: amzn.to/2vXQwPZ
1/4" Torque Wrench: amzn.to/39xOd3X
Feeler Gauges: amzn.to/2wKACZy
Dial Test Indicator: amzn.to/2xCpM7R
The Scales you should get... :amzn.to/3aqSgjv

Пікірлер: 82

@sidbobby3233 2 жыл бұрын

Wicked video mate looking forward to seeing you mapping it and learning about that process ect. 🖒👊✌

@845_Mk6 Жыл бұрын

All the cooling !

@druckerman247 Күн бұрын

Yessssss! Love it mate.

@CarChris82 2 жыл бұрын

Great job Nick its all taking shape 👍🏻

@DecimalTenths 2 жыл бұрын

Cheers pal, definatley coming together. Next few videos will see it sorted

@leehartley1667 2 жыл бұрын

Nice job 👍

@caveone-365 Жыл бұрын

The twintercooler is definitely a pretty creative idea that forge came up with. Why not make use of the stock one in addition if it's in good shape, so it makes sense. I think the only thing I'd change is to some T-bolt clamps rather than the worm gear ones. I mean the worm gear ones are probably okay because this isn't a super high boost application, so the worm gear ones probably wouldn't blow off, but it's mainly a preference thing. I use the T-bolts anytime I can on charge piping/ intercooler flanges. Definitely a clean/ simple install and solution. Thanks for sharing 👍😁

@DecimalTenths Жыл бұрын

Cheers! We have great work drive over here from Jubilee and JCS. Both great options.

@phdiy3913 Жыл бұрын

That cossie though 🔥😍

@DecimalTenths Жыл бұрын

Ha more on that soon...😉

@richardstubbings6962 2 жыл бұрын

Sweet 👏

@rickydub6950 2 жыл бұрын

Not long to go now man 😁👍

@ismarking2413 Жыл бұрын

Come one man , continue with this project !!! We are waitining for new content

@DecimalTenths Жыл бұрын

Sorry dude busy boy. Back at it this week

@sidbobby3233 2 жыл бұрын

🖒 happy days

@stevensmith3069 2 жыл бұрын

Great video I’ve just found problem with mine the valve cover evap line leaks when 5psi applied it was the last thing I checked after bore scope, compression test leak down test new pcv new n80 new evap canister ha hope this solves problem Monday when I get my new cover 🤞wish I could tig like that even though you didn’t think it was that good great video mate

@DecimalTenths 2 жыл бұрын

Cheers mate, my TIG welding on clean Ali is quite good, but the contamination on the pipe meant the weld pool was always compromised. Grinding back and redoing it got it to where i left it. It'll certainly do 👍

@GIXXERUKX 2 жыл бұрын

Great stuff, really coming together now, did you mention where you bought the headlights? I can’t remember 🤦🏻

@DecimalTenths 2 жыл бұрын

Probably not pal, but they came off good ol ebay 😁

@mrstanhope1516 2 жыл бұрын

New lights make a huge difference to the look of the car. The jazz blue Lupo in the background looks interesting?

@DecimalTenths 2 жыл бұрын

They do don't they 👍. That's Richards little hybridturbo 1.8t Lupo. Lovely little car which is at the end of its build now.

@mannybee 2 жыл бұрын

You make it look so simple and I agree totally with you about welding that adaptor on the charge pipe. Those Rtech welders are spot on for the money! Be interesting to see how much the extra intercooler makes in terms of cooling and power. Would it make it a bit slower to boot up, slightly more laggy? Thinking if its going through more cooling stuff that its slower in getting to the engine? I suppose once the system is charged it won’t make a difference, or I could be wrong lol

@DecimalTenths 2 жыл бұрын

Yep our Rtech Tig is immense 👍 I've tuned a load of cars with twintercoolers and not noticed any additional lag. Just like the runner flaps, if you change the system that much with a bigger turbo, and then cool it... the bigger volume of charge, plus additional cooling and therefore dense air actually equals an improvement over hot oem stuff 😬

@mannybee 2 жыл бұрын

@@DecimalTenths makes sense thank you Nick. Excited for the next instalment

@walther89 Жыл бұрын

when going for budget then this is the deal, but im going to replace mainman to DO88

@fabionicolussicastellangal4933 Жыл бұрын

It is a good choice, mount it on a stock car, without map it?

@TheMartman1971 3 ай бұрын

Anyone know the part number for the mk6 intercooler so i order the right one before fitting my twintercooler 🤔

@husseinzaiter616 4 ай бұрын

❤❤❤❤

@Neeks636 11 ай бұрын

Hi what are the intercooler dimensions? Thanks

@markrs59 2 жыл бұрын

I quite like that twin cooler set up, it's a bit funky

@DecimalTenths 2 жыл бұрын

Funny for sure. Will work for what I need 👍

@markrs59 2 жыл бұрын

@@DecimalTenths totally agree, they still make fairly good power with a standard cooler on especially with a ko4 so it's only going to be an improvement and it looks cool as the normal replacement airtec cooler still sits in the middle of the rad pack I think

@DecimalTenths 2 жыл бұрын

@@markrs59 Yeah this isn't strictly needed to be fair. But maximising potential of my requirement for shiny bits is all...🤣

@youtubeuseronalot6376 2 жыл бұрын

Regarding standard intercooler connections....is there any recognised fix to stop them blowing off ...I have a Leon FR where there it's only a matter of time before passenger side continually blows off ...a new pipe lasted several thousand miles even gave up & what I thought would be permanent fix 'assembled' with Tiger Seal this didn't hold either was thinking jubilee clip over the retaining clip 🤔

@DecimalTenths 2 жыл бұрын

They are gash, hate them. They can wear and cause issues so good to inspect and confirm, you're might be goosed

@Dave1992QSE 8 ай бұрын

Ho nick! Nice video! I bought the same for my mk6 gti. Does it need welding?? Or can I simply use those adapters without any problem? Thanks!

@DecimalTenths 8 ай бұрын

Cheers! You can use the adaptors, however they may leak depending on the condition of your pipes and seals

@bengreenland187 2 жыл бұрын

Loving the content mate! What brand condenser did you use? I need a new one too!

@DecimalTenths 2 жыл бұрын

Just one from the local motro factors pal. Can't even remember 🙈

@bengreenland187 2 жыл бұрын

@@DecimalTenths Damn! the fitment looks well. I’ve heard some from euros etc have fitment problems.

@DecimalTenths 2 жыл бұрын

@@bengreenland187 it was good mate for sure. I've also dealt with crao ones. I'll double check for you tomorrow

@bengreenland187 2 жыл бұрын

@@DecimalTenths did you manage to find out in the end mate? 👀

@DecimalTenths 2 жыл бұрын

@@bengreenland187 Yes pal it was EIS 👍

@noahreiboldt9956 2 жыл бұрын

Healthy crank, no start on my 06 mk5 jetta gli (tfsi). Just finished up walnut blasting injectors and timing belt service. Advice on tracking down the not start?

@noahreiboldt9956 2 жыл бұрын

Is there a way to manually prime the fuel system? (lpfp -> hpfp -> injectors)

@richforster5741 2 жыл бұрын

Do forge quote BHP increases for this? Or have you dyno’d without and with?

@DecimalTenths 2 жыл бұрын

No they don't quote, bit I've tuned cars with this setup to stage2+ k04 levels in the past and its been fine. I'll show it all when tuning it.

@cuprak1lad543 2 жыл бұрын

Wellycooler is the best intercooler for the tfsi, especially the k04. They perform far better than wagner or airtec

@DecimalTenths 2 жыл бұрын

Almost like you didn't watch the video...🤣

@cuprak1lad543 2 жыл бұрын

@@DecimalTenths I do enjoy your videos, it's good to have some decent tfsi content mate 👌

@DecimalTenths 2 жыл бұрын

@@cuprak1lad543 Cool, our track car Mk5 will be a bit wilder 🔥😬

@jd32k 10 ай бұрын

Can i ask. Is it worth juat sticking with the usual larger intclr, or what is this smaller one like?

@DecimalTenths 10 ай бұрын

This option runs both the stock intercooler and the smaller fmic

@Bumm1965 3 ай бұрын

I have a question for you or anyone else who has installed the twinter cooler... With this install have you experienced any boost lag down low? My boost seems to hit somewhere around 2800 3000

@DecimalTenths 3 ай бұрын

No we don't see any issues like that with the twintercooler fitted. We have only ever fitted Forge ones though

@amarmatloob9624 Жыл бұрын

Would this not make the turbo more laggy as it's got more to fill before making Boost?

@DecimalTenths Жыл бұрын

No the response is immense 👌

@gamersroost 2 жыл бұрын

That car is so sexy with those eyes. Do you think that adding the twintercooler cause any noticeable turbo lag since the volume has been increased? I don't build racecars, so this may seem like a n00b question.

@DecimalTenths 2 жыл бұрын

Good question, I've never noticed additional lag from these intercooler. But most full intercooler will have a big difference in volume over the stock item, so will be comparable I'd imagine.

@gamersroost 2 жыл бұрын

@@DecimalTenths I can't get over your channel. Best out there for the person that knows just enough not to be shadetree, but NEEDS to be more :)

@LinusF_ 2 жыл бұрын

where did u buy those headlights? works with halogen?

@DecimalTenths 2 жыл бұрын

More info coming, but the headlamps were off ebay

@danieltosaba 10 ай бұрын

Hi guys.. I am wondering if this one could fit my Audi A3 8P 2009 facelift??? Got the great offer from the GTI MK5 owner... Thanks!

@DecimalTenths 10 ай бұрын

It will 👍👍

@danieltosaba 10 ай бұрын

@@DecimalTenths No modifications required? Same hoses?? Cheers man!!

@adamsimo6691 Жыл бұрын

Hi, does it prevent boost leaks?

@DecimalTenths Жыл бұрын

It can simplify the system to prevent boost leaks yes

@sidbobby3233 2 жыл бұрын

Does the "twin intercooler " make it laggy mate?

@DecimalTenths 2 жыл бұрын

Not from my experience of them.

@sidbobby3233 2 жыл бұрын

Thanks bruv.

@sachielmendoza2881 Жыл бұрын

Ive heard this fits a Mk6 GTI. Is that true?

@DecimalTenths Жыл бұрын

Yes it does 👍. I run the Mk6 intercooler and forge twitter cooler.

@Raouldip Жыл бұрын

What has happened to the track car?

@DecimalTenths Жыл бұрын

It's making a huge comeback this winter...😂😂

@mostwantedcrewpt 11 ай бұрын

Hi, does it work for the mk6 gti?

@DecimalTenths 11 ай бұрын

It does indeed 👍👍

@098matija Жыл бұрын

How much does the Twin IC lower intake temps? Cheers

@DecimalTenths Жыл бұрын

Quite a lot, and can support stage2+ tuning no problem

@Bumm1965 3 ай бұрын

In your best guess, how well will it keep the temperature down? My intake temperature always seems to be around 20degree higher that the outside temp. Example of the outside temperature gauge is reading 88 degrees, my AIT will read between 108 and 110 degrees Fahrenheit. Is this normal?

@fabionicolussicastellangal4933 Жыл бұрын

It is a good choice, mount it on a stock car, without map it?

@DecimalTenths Жыл бұрын

It will help with Intake temps with no ill effect. It isn't needed unless mapped though.