How to Bleed a Radiator - Jeep/Dodge 4.7L

  Рет қаралды 241,130

D&E In The Garage

D&E In The Garage

5 жыл бұрын

The process for bleeding the radiator on a Jeep/Dodge 4.7L V* is not the same as in most vehicles. Improper bleeding of air from the syste, can lead to overheating and serious engine failures.
The vehicle in this video is a 2001 Jeep Grand Cherokee WJ, but this process will be the same for all Jeep/Dodge 4.7L V8s.
Need to replace the radiator for your 4.7L? Checkout this video:
• Jeep Radiator Replacem...
Want to support D&E?
D&E Stickers on ETSY:
www.etsy.com/shop/DandEintheg...
D&E Shirts on TEESPRING:
teespring.com/stores/de-in-th...
Become a PATREON and receive D&E gear as well as exclusive content:
/ dandeinthegarage
We hope you enjoyed this video and will keep in mind that all information included is intended to be purely academic and in fact is only the opinion of D&E. We are not professionals, nor are we qualified to knight you a professional. D&E want to ensure that anyone modify or fixing their own vehicle does so in a safe manner which leaves the vehicle in a legal, roadworthy state. In short, DON'T BE A MONKEY WITH A TOOL BOX! If you don't know what you are doing, leave it the professionals!

Пікірлер: 448
@curtisjohnson7361
@curtisjohnson7361 4 жыл бұрын
I'm gonna tell you a story I have a 2013 Dodge ram 1500 started overheating don't know why so I changed out the water hose the thermostat still was overheating so I Changed out the Fan clutch new radiator new water pump still overheating I was at a low point of giving up Then I ask God for help he showed me your video I want to personally thank you sir your video just made my day now my truck Has stop overheating Working fine now GOD BLESS YOU
@candygarfield9315
@candygarfield9315 2 жыл бұрын
I identify with this comment. Having issues, I kept saying my heat was too hot..they kept saying it's 20 years old.. just fill overflow, I wouldn't do it.. I WANTED TO KNOW WHY IT KEPT HAVING TO BE REFILLED. I just sent this and another non dodge sponsored video, to my son in law for our LEARN A NEW THING A DAY DURING COVID.. LOL In this video I learned also about the valves and can check those too.. I love this truck. The guy sold it to me maintained it for 18 years, now everyone wants me to just run it to the ground. I refuse. It was getting 18 to 20 mpg, now it's at 15. Because everyone said it couldn't be fixed. And this video shows what my concern was. You can't just fill overflow and be done, so many bring it to mechanic or dealer. When the issue is the bleeding and pressurization. I hope I saved it, by not driving it while trying to troubleshoot it.. Everyone involved has learned a new thing, that this engine needs to be serviced correctly and not just fill overflow. So many can't get it, because they always just fill overflow in other vehicles. This is not the same type if system.. so get a her kit in your truck.. because if you have to add antifreeze, it's not a quick fix, until you can do this process in the middle of the night with no light.. lol and it's 22 degrees.. but after you do it a couple times when it's convenient, you might not get stuck like that. . These tutorials are great.. even I can follow them.. I just need extra muscle to get the bolts out.. lol
@abumannocchi4011
@abumannocchi4011 2 жыл бұрын
Powerade , that’s a new one , how long should I let run and should I do this twice three times ? Should I put ac on high ? , should I push the coolant hoses , do I put cap on while cars on or off ,
@warrenprice2113
@warrenprice2113 2 жыл бұрын
I'm having the same problem with my 2010 Ram 1500. I changed the thermostat and the temperature went high. I followed the video and now it's good
@MartinJohnson-cz1fy
@MartinJohnson-cz1fy Жыл бұрын
YOUR OWN ASSUMPTIONS ELUTIONS IMIGOUSE THOUGHTS THAT GOD OR WHITE JESUS BLANCO DID ANYTHING FOR YOU ARE NOT FACT'S , BUT ASSUMPTIONS YOU PERSONALLY CHOSE TO BELIEVE AND HAVE BEEN IMPOSED BRAIN WASHED TOO BELIEVE NOT FACTS
@averykincaid4134
@averykincaid4134 Жыл бұрын
Same here
@thee31337
@thee31337 11 ай бұрын
it's always little sneaky issues like this that kill perfectly fine vehicles... thanks for spreading awareness!!
@AN0N_Ghoul
@AN0N_Ghoul 4 жыл бұрын
This explains so much! Ive never heard about this before and doubt anyone whos owned or serviced this jeep before me knew either. Thank you for your knowledge!
@johnwarner8139
@johnwarner8139 2 жыл бұрын
Like many of these other comments I was almost at the point of giving up. I flushed the radiator, change the water pump, changed the thermostat but nothing stopped it from overheating. As soon as I did what you explained in this video I watched the bubbles come out for about 5 minutes. Now it's running perfect this saved my butt, thank you.
@4WDriver
@4WDriver 4 жыл бұрын
Hey Doug, just wanted to say a quick thanks for posting this one, as well as the water pump replacement video. The water pump started making a rattling/chirping/clanging noise, the bearings were about to give up the ghost. I remembered you had these vids, so I used them to double check that this was as simple of a job as it appeared, and you confirmed that for me. I live in a residential RV park, and they don't want us doing a lot of work on our vehicles here. This water pump was surprisingly quick/easy to replace!
@DEInTheGarage
@DEInTheGarage 4 жыл бұрын
Yea, coming from the 4.0 I was blown away by how easy it was to replace. No paper gaskets to scrape and plenty of room to work. Glad you found this helpful!
@DanielPerez-cv6xi
@DanielPerez-cv6xi 2 жыл бұрын
This is the exact reason I’ve had to rebuild my top end twice on my 06 Commander 4.7. Seeing this definitely shows me why I keep having the same issue thanks.
@byronwhitney665
@byronwhitney665 2 жыл бұрын
Thank you so much. I was not aware of this procedure. I just replaced the heads and water pump on my 2003 JGC with the 4.7 HO engine. I performed this procedure and successfully removed the air that was in the system. Great content for shade tree mechanic’s like myself.
@firebir11
@firebir11 4 жыл бұрын
I’ve done this procedure on my 3.7, basically same engine layout, it’s no big deal and very easy (simply watch for bubbles and take your time)
@nicholashall9711
@nicholashall9711 4 жыл бұрын
I was having over heating issues in my 4.7. It has a new water pump, thermostat and housing, brand new radiator and all hoses/clamps. I had no idea I had to do this. It's in an 03 dodge durango. Has 236,000 miles. Thanks man you probably just saved my motor.
@DEInTheGarage
@DEInTheGarage 4 жыл бұрын
Glad to be of help! This one almost got me as well on my first 4.7
@tbrackett9344
@tbrackett9344 4 жыл бұрын
THANK YOU! Working on radiator replacement in the next few days. Waiting for parts. You saved me from a serious ASS REAMING from the wife. I can see it now! This radiator is a pain in the ass! I miss the simplicity of my 1970 F100. Thanks again!
@samclemons9086
@samclemons9086 3 жыл бұрын
Thanks for the help. I just got done doing this on my Ram 4.7. My engine is actually running a little cooler now that I flushed it and put the right coolant in it.
@ronadamson4595
@ronadamson4595 3 ай бұрын
A better way to fill and bleed the coolant is to remove that 8 mm plug,take a transmission funnel with the small end and screw it into the bleeder hole where the 8mm plug was,remove the radiator cap,fill the cooling system through the funnel until coolant comes out of the radiator where the cap was.basically you are reverse bleeding it.i do it all the time at the Chrysler dealership I work at.this method works well quickly.
@BBBT1972
@BBBT1972 3 жыл бұрын
Many thanks! My son's 2005 Dodge 1500 4.7 liter overheated. I found that the waterpump was going out. So we replaced it. While there I decided to replace the lower hose. Hence all fluid ran out. Refilled and after a few minutes we overheated again. Upper hose hot and lower cold. That made me think the thermostat was stuck. So I finally found the dang thing. Never found one on the bottom before. Came across your video while looking for pointers on changing the thermostat. Hmm. We didn't do that. Followed your instructions and boom. It stayed at operating temp for a five mile trip in 2nd at 2500-3000rpms. I call this job done. Again thanks!
@user-vl4pf4vv4n
@user-vl4pf4vv4n Жыл бұрын
Thanks for the info. Just replaced the radiator and could not figure out why it kept spewing now i get it. Good motors but some design flaws for sure. Great to the point video with good volume and clarity. Thanks man
@MrCPPG
@MrCPPG 3 жыл бұрын
Just replaced my radiator on my 2002 Ram 1500 with the 4.7. Came across your video as I was getting ready to fill the new radiator. Thanks for the vid.
@Jarod1941
@Jarod1941 5 жыл бұрын
"Doesn't have to be too tight, just snug" says the guy who almost had to use a breaker bar to get the plug off.😅 Good vid Doug. I'm one the few I know that had a 4.7L first out of my Jeep group so I had nobody to turn to for engine hints. I learned this trick from a guy on nagca that's a Mopar mechanic. He also confirmed that not doing this is a leading cause of blown head gaskets (due to the higher temps). Keep up the great work.👍
@DEInTheGarage
@DEInTheGarage 5 жыл бұрын
Haha.. Yea, from the factory they have loctite on then which is concerning that it seems mine was still factory sealed...
@luchaDor
@luchaDor 5 жыл бұрын
On my 08 4.7L, I open the bleeder, top if off and close it back up. I run the engine with a Lisle (EPAuto Knock off) Spill Proof Radiator fill funnel with plenty of coolant in it. Run it with the heat on and just keep massaging the upper radiator hose until there's absolutely no air in the system. I've never run it with the bleeder off though. Hasn't been an issue in the 4x I've had to replace the coolant due to a water pump, radiator or just changing it out. But yes, 100% agree that that spot will be the cause of air pockets if you don't open it up and fill it up! Keep up the great vids!!! (Though, by 08, the reworked 4.7L is supposed to not have the valve seat dropping issue.)
@denwin8811
@denwin8811 3 жыл бұрын
I have a 2003 Ram with a 4.7. Overheated a year ago, replaced the thermostat and changed the coolant, but I hadn't taken it on any long trips or pulled anything since so no problems. Today ,a year later, it was running at the top of the gage after a 50 mile trip. I remember bleeding it, but not quite this way. I will try it and let you know if it helps. Thanks for posting your video.
@DerkJester
@DerkJester 10 ай бұрын
I just purchased an 04 Ram 1500 with the 4.7. Had it start to run a little warm in a drive thru and two days later this video comes up. I know what I’m going to do soon. Haha. Thank you!
@garypacheco1810
@garypacheco1810 3 жыл бұрын
Did not know how to purge you just saved me hours, a trip and probably lots of money greatly appreciated
@stephenreynolds9546
@stephenreynolds9546 8 ай бұрын
Changed the waterpump the other day and still overheated.. wracking my brain 3 days now as to why, this explained it! Thanks man, I appreciate the video!
@jakepage2205
@jakepage2205 7 ай бұрын
How long did it take you to bleed all the air out. I am 25 min in and still get bubbles out
@stephenreynolds9546
@stephenreynolds9546 7 ай бұрын
@@jakepage2205 it took a GOOD 40 or so minutes.. it was a long while to be honest
@jakepage2205
@jakepage2205 7 ай бұрын
@@stephenreynolds9546 that’s what I was reading on all data and ProDemand as well. I hate 4.7s 😂
@Stickduptremayne
@Stickduptremayne 3 жыл бұрын
Really saved my car from being sold. Really thankful for this vid
@kyledouglas5649
@kyledouglas5649 3 жыл бұрын
I've had issues finding videos but yours is best for folks doing repair at home thanks for your time and help. I've had replace everything cooling system wise just finished at 1 this morning
@DEInTheGarage
@DEInTheGarage 3 жыл бұрын
That is a heck of a job! Hope this helped!
@cronkthecrunk
@cronkthecrunk 4 жыл бұрын
Saw the port there wasn't sure how to exactly do it so I'm glade you made a video 👍
@americanpatriot3344
@americanpatriot3344 3 жыл бұрын
Just got my 4.7 WK fixed today, was a bad t-stat and needed to bleed the air out which was done. There was such a big air lock in it that kept the coolant from flowing that we cleared up ultimately that all I know, is I'm glad it is done now and I made sure it wasn't getting past the mid-point anymore for 6 mins or so and it stayed at N.O.T. (Normal Operating Temp). Good video.
@roninsurvivor4640
@roninsurvivor4640 4 жыл бұрын
It's so simple! Great video. Thank you for sharing this!
@daltonmaus3479
@daltonmaus3479 Жыл бұрын
Thank you for your video... I've been working on this for almost 2 weeks. Not just this issue, but this is definitely AN issue. Hopefully my last hurdle. Keep the videos coming!!
@lisasyoutube3856
@lisasyoutube3856 2 жыл бұрын
I can't THANK YOU enough! I've already had to replace the engine in my 2007 Dodge Ram 1500 because of the dropped seat exactly as you explained ... Was running well until recently, started loosing coolant and not getting heat like I used to... I'm betting the mechanics that replaced the engine and radiator didn't do this .. gonna try it as soon as it cools down 🤞
@DEInTheGarage
@DEInTheGarage 2 жыл бұрын
Good luck!!
@dolfan1318
@dolfan1318 2 жыл бұрын
Same thing happened to in my 4.7L Commander. 6k for a new crate motor, ouch!
@markmariani6465
@markmariani6465 Жыл бұрын
Bro, you just saved me a lot of money. I blew my upper radiator hose, and stumbled upon you and this video and had NO IDEA that you had to "bleed" out the air!! Many thanks for taking the time to show us this!!!
@ryanlatterell2079
@ryanlatterell2079 3 жыл бұрын
Thanks man, I'm redoing my 03 durango 4.7L water pump and knew this was issue w these 4.7s. But didnt know how 2 bleed. Thanks a TON man. Ryan
@joschuppert365
@joschuppert365 Жыл бұрын
Thanks for that bit of knowledge. Just replaced my radiator on my 99’ 4.7 and what a job that was. Tranny lines were rusty, ended up with a new tranny cooler also.
@buddy8225
@buddy8225 4 жыл бұрын
Thanks for the advice. Looking out a 2001 Durango with that motor in it and now I know what to look for.
@somosdeleon3878
@somosdeleon3878 Жыл бұрын
*Thank you, friend! This is a critically valuable piece of information. Bless you for sharing it.*
@Don-sh7ee
@Don-sh7ee 2 жыл бұрын
Im glad i saw this..guys working on my jeep forgot to bleed it properly, and it kept overheating! Thank you.
@rcmachinehead4085
@rcmachinehead4085 17 күн бұрын
The WJ Gaurdian angel!! Thanks for the video you probably saved my WJ as well
@dolfan1318
@dolfan1318 2 жыл бұрын
Great advice man! I'm getting ready to do a coolant flush today and I'm so grateful that i ran across your vid. I only wish i knew this a couple years ago. My 4.7L V8 in my Commander overheated for no apparent reason one day on the highway. I pulled over immediately, shut her down to avoid further damage, but it was already to late, motor blown. $6,000 later, my new crate motor just overheated but i was lucky this time and the motors good. I did notice that the guys who put the motor in must've filled the radiator as well and put some green colored shit in there, which was wrong since everyone should know that motor requires HOAT, which is an amber color! If they didnt even do that i doubt that they bled the system as you suggested in your video. Which is possibly why car overheated again. Well, they say if you want something done right then do it yourself and that's why I'm off to do my coolant flush right friggin' now! Peace✌️😁
@AaronS11979
@AaronS11979 Жыл бұрын
For what it's worth, Prestone makes a HOAT, Aluminum head compatible antifreeze that is green. I don't think the "only orange" rule still applies 100%. However, unless you personally put it in yourself you can't be sure what it is.
@EndlesSuffering
@EndlesSuffering Жыл бұрын
This happed to my 01 Cherokee 4.7, except I pulled over before it got to the H, so far haven’t had any issues so I hope I didn’t do damage to the engine.
@darrenchapman6871
@darrenchapman6871 Жыл бұрын
Aw😮🎉ny😅llamymaYjjmwsaka Awoaa😅l😅l
@christopherlwilli
@christopherlwilli 2 жыл бұрын
Thanks for showing this. I rebuilt my 4.7, and the Chilton manual does not mention removing the bleeder to fill the coolant. What concerns me, is now I'm doubting their torque specs as well. Anyway, thanks again for the vid.
@danhambrick6331
@danhambrick6331 5 жыл бұрын
Good point Doug.Usually,if you have air trapped in the system,your heater will blow cool air.
@DEInTheGarage
@DEInTheGarage 5 жыл бұрын
true!
@davevinson8436
@davevinson8436 3 жыл бұрын
You should not take the bleeder valve all the way off you lose too much coolant that's what I found loosen the bleeder tell the air starts coming out
@wadet73
@wadet73 3 жыл бұрын
Thank you thank you thank you! I have an 01 Durango 4.7. This explains so much. I'll be doing this procedure once she's cooled down.
@anthonycuty4971
@anthonycuty4971 3 жыл бұрын
thanks man just finished the water pump was going to return it as a possible defect, Whew, what a save.
@stansmad
@stansmad 2 жыл бұрын
My liberty 3.7 L is the same setup. Unfortunately the previous owner wallered out the bleeder fitting and it cannot be removed. I even put some heat on it and vise grips with no luck. I filled mine through the top radiator hose and watched for bubbles in the coolant jug. Took me a couple hours but it finally ran cool. They are a pain in the butt !
@1stzjtruck706
@1stzjtruck706 5 жыл бұрын
Great to know that information. Me and the wife are looking at picking up a 2001 WJ 4x4 that someone ran without oil in the 4.7. Another engine change from the PYP coming up for me. This one will be for my middle daughter.
@DEInTheGarage
@DEInTheGarage 5 жыл бұрын
Good luck with it!
@timothywillis7872
@timothywillis7872 4 жыл бұрын
Thank you for that video. I have the 4.7 ram and I was wondering what that port was for.
@JP-rw9cg
@JP-rw9cg 2 жыл бұрын
Thank you so much for this great tutorial! Very simple and straightforward. JP.
@film-orgy2137
@film-orgy2137 3 жыл бұрын
Super!! thank You for the quick video for this important task!! I appreciate you taking the time!! Remember, safety is no accident!! LoL
@salizar64
@salizar64 3 жыл бұрын
Just want to say if it wasnt for you man i wouldnt have my 04 laredo up and running like a charm! Appreciate you man!
@DEInTheGarage
@DEInTheGarage 3 жыл бұрын
That is awesome! I am really glad to hear you found some help in our vids.
@theodorotugade3685
@theodorotugade3685 4 жыл бұрын
This is really helpful. I just recently replaced both of my cylinder heads (first time doing it) and after 1k miles i had a blown headgaskets. Wasn't aware of the proper bleeding procedure. No wonder i kept hearing gurgling sound under my dash after i turn off my engine. Did a research about it and found out i have air in my cooling system. You're right. My 4.7 never overheated but it's temp running a bit high than normal. Never passed 210 but close. Now just have to redo everything again and hope everything goes well this time.
@filipeferreira7019
@filipeferreira7019 3 жыл бұрын
Mine does the gurgling sound aswel wen shut off. Did the bleed fix it?
@theodorotugade3685
@theodorotugade3685 3 жыл бұрын
@@filipeferreira7019 If you recently replace your cooling system components like radiator, waterpump, thermostat etc. then u proly need to bleed it if there's a gurgling sound in your dash. But u haven't and it makes that sound, im not a mechanic so i can't really give u an answer. You might wanna ask or see your trusted mechanic. But to answer your question after i bleed my system. Yeah it did work! U just have to do it multiple times til u dont see any bubbles coming out yout bleeder valve.
@kcamlamars9244
@kcamlamars9244 2 жыл бұрын
Thank you so much man, I was wondering why it was continually stay hot. Thank you for the bleeding information.
@shalamahthebrew5553
@shalamahthebrew5553 Жыл бұрын
Another tip: anything with a secondary heater core, turn the rear hvac unit to heat position (at the rear hvac unit control panel) so that the heater bypass valve opens.. took me 3 times bleeding from completely cold to figure that out.
@Fastasfffboiii
@Fastasfffboiii 2 жыл бұрын
This works. I tried to bleed my system by just removing the radiator cap and elevating the front end of the truck and the heat would not come through and I saw no bubbles. I removed the valve he showed and left the cap off and instantly saw bubbles coming from the valve port. But do be aware if you don’t have a wide funnel to catch the coolant you will looses some. And possibly spill onto the engine causing a burning coolant smell. Obviously lol. But after about ten minutes the heat was melt my skin hot so ik it opened up and I shut the truck off and capped everything off. Be sure to take the vehicle on short drives and check the fluid level often when the vehicle is cold. To ensure you have the proper amount of coolant in the radiator, reservoir and engine. The AC blows penguins and the heat blows fire The engine temp stays optimum most of the time right behind the center line. Before it used to run slightly hot. I’ve replaced the water pump, radiator, radiator hoses, and thermostat. So I let a lot of air in. And this method definitely allowed the air to escape.
@mikeadams5410
@mikeadams5410 5 жыл бұрын
Hey gents whats up? Got back earlier from my third yard today finally found a door panel for BETTY my 01 blazer and saw you posted a new vid. No 4.7 in the fleet yet doesnt matter always worth a view. Cracks me up the thumbnails before you click on the video start with subtitles your intro has been interpreted many ways on my end so far : double dini and the dean are my fav who knows maybe a new moniker for you. Keep up the good work and sharing your knowledge. Hopefully you didnt pay for that bears shirt 😄
@DEInTheGarage
@DEInTheGarage 5 жыл бұрын
Daaaaaamn... throwing shade at muh bears?!
@joeautorepairauto210
@joeautorepairauto210 4 жыл бұрын
Exactly what I was looking for..Im.so scared to crack that bleed on my 06 Durango if they threads brake , here we go again.
@dongkapuyawn5107
@dongkapuyawn5107 2 жыл бұрын
Whew! Good thing i found this video. ‘02 DodgeRam15004.7v8 had a lower hose coolant leak. Drained coolant, changed both upper n lower n thermostat
@phennig2003
@phennig2003 5 жыл бұрын
Thanks man! very informative! Love the channel!
@donoimdono2702
@donoimdono2702 Жыл бұрын
thank you! I replaced my water pump a couple of years ago and didn't know this. last weekend my thermostat went out and she overheated. this time ill know how to do this correctly.
@mikemelina7395
@mikemelina7395 4 жыл бұрын
Thanks for giving the "why" on the procedure.
@tylersmothers1724
@tylersmothers1724 2 жыл бұрын
Thanks. Switching to a 180 thermostat today instead of A 195 and needed this info for how to bleed the system. Now I’m debating if I want to flush the coolant from the block, or just do it from the bottom of the radiator. Previous owner had mostly water in the coolant. Tiny green tent to it. So mostly water and the wrong coolant. Sounding like I just answered my question for myself
@terrybouffard7833
@terrybouffard7833 2 жыл бұрын
Learn something new everyday. Thanks for the video explanation.
@John___Dough
@John___Dough 3 жыл бұрын
Thanks I got a 4.7 with a coolant leak somewhere and have been adding coolant and have never done this I didn’t even know that was a thing thank you again will do for now on
@standingintheshadows9670
@standingintheshadows9670 3 жыл бұрын
Thanks for the heads up bro getting ready for my coolant flush and change (first generation Durango)
@neftalisoto4757
@neftalisoto4757 9 ай бұрын
Thanks bro love your videos. I’m doing this to my 47 this weekend. Thanks for the video. PS my wife said hi to the executive producer.😂
@MrSkyhawk11
@MrSkyhawk11 3 жыл бұрын
Great video. I own a 4.7 engine grand cherokee and must bleed coolant system.
@chasermalloy7406
@chasermalloy7406 3 жыл бұрын
Yep, just like V12 Jags. There's a bleeder there so use it. The same thing happens on the Jags - dropped valve seats. The other thing people can't get though their head is that when a modern car ( mostly alloy heads or full alloy engines ) over heats, throws a belt or breaks a coolant hose or whatever you STOP. They still think well we're only 5 miles from home or the shop it'll be ok. Well it won't be ok. Even an expensive tow is way cheaper than a new engine.
@joethenoob
@joethenoob 4 жыл бұрын
Nice video man. I just got a 4.7 04 Durango, when I run it, after like around 30 mins if I stop at a light or stop. The temperature gauge will rise to the middle line or a little more above. But if I step on the gas it will go down. What can it be? I just got a thermostat, temperature sensor, and a cap... lol
@manuelcalzada3235
@manuelcalzada3235 4 жыл бұрын
How long does it take you to get all the bubbles out
@diyautomotive4750
@diyautomotive4750 2 жыл бұрын
hey when i remove the upper rad bleed screw then remove the rad cap it shoots out of the hole why is this? can i bleed it with the screw still threaded in a bit
@brianearnhart6350
@brianearnhart6350 3 жыл бұрын
Thanks man. You may have just saved me a lot of time and money. Much appreciated
@DEInTheGarage
@DEInTheGarage 3 жыл бұрын
I hope so! Good luck!
@lifewithkeith310
@lifewithkeith310 2 жыл бұрын
My doin the same thing I changed the thermostat but didn't bleed it I put some in the bleeder valve wit the car what should I do now wait till I coo then take the caps of the radiator and bleed it agin
@robertbrewster6890
@robertbrewster6890 3 жыл бұрын
I'm certain my mechanic did not do this and that is why my engine runs a little hotter occasionally. Thank you!
@JustinD93
@JustinD93 3 жыл бұрын
Helpful video dude thanks! Just bled my now with this method. However once obviously leaving bleed screw out and rad cap off I but all heaters on inside car on full left it running for 20 mins and temps all sitting where they should be, however my bleed screw didn't over flow like yours does in video but it stays consistent with no bubbles. This should be fine right? THANKS DUDE!
@LuisCarlosJimenez
@LuisCarlosJimenez 3 жыл бұрын
Hi, my 2010 Dodge Ram 1500 has the 4.7L and the coolant temp on the dash display is between 198 to 209 is that normal? Or what's the normal temp for this engines?
@kirkjohn7255
@kirkjohn7255 2 жыл бұрын
Thanks for the heads up bubba. There's an irony to your video. Last night I was in a Walmart parking lot before I overheated. Got on the freeway and noticed my temp gauge was steadily climbing upwar 😉d. Then out of nowhere it started knocking then shut down on me. Working in her right now. Just flushed the system. Hole I'm doing it right.
@nateprusia9158
@nateprusia9158 2 жыл бұрын
I wish I would've seen this way sooner. But at least I caught this info before replacing my water pump. I've seen some symptoms of possible valve issues so I'm worried now I'm too late.
@Dee-ZG
@Dee-ZG 3 жыл бұрын
Thank u very much men I just fix mine every time I got to the traffic temperature start going up now I did this I left on for one hour and 15 minutes and the temperature was good thank God blessed you
@malakisrael786
@malakisrael786 4 жыл бұрын
God bless you! I could not understand what the problem was. I have the same engin in a dodge dakota.
@Jim-pm1qv
@Jim-pm1qv 2 ай бұрын
GREATI VIDEO ..last thing you wanna do is loose the bleeding plug screw , very difficult too come across another one .
@want2boutdoors274
@want2boutdoors274 2 жыл бұрын
Will the jeep stall out if there is air bubbles in the system? I jad mine bled out, because i couldnt get the valve off, but its still stalling and temps getting hot. Should i do it again, but do it myself?
@willkohler9332
@willkohler9332 3 жыл бұрын
Great video, the 4.7L looks like same set up as my 3.7L in my 2012 Jeep liberty.
@andysaunders3708
@andysaunders3708 3 жыл бұрын
Clear and concise instructions. Thanks. Andy
@mack606
@mack606 5 ай бұрын
Yes do you remove the bleeder screw all the way or just crack it open enough to see the bubbles
@VMAFIA
@VMAFIA Жыл бұрын
How do you know when to stop filling and when the last bubble is out? I noticed a free onces at least dripped from the bleed port and the radiator level would lower so how long is too long to wait?
@jayantuna386
@jayantuna386 3 жыл бұрын
Need help replaced water pump on 4.7 Durango and I’m doing what your showing but still getting hot replaced thermostat and housing with the flush still having same issue
@peteh7911
@peteh7911 8 ай бұрын
December 7th 10:00 p.m. 2023 I have a 2006 Jeep Grand Cherokee just changed out the thermostat and check the fuses because my car was overheating I have been trying to get the air bubbles out of my system like on your video still getting bubbles in my overflow overflow tank have tried to get the bubbles out by opening up the valve at the same time ran car for 40 minutes and I'm still getting next I will try parking on a slope or using ramps to push the air out of my system thank you for your video and skills
@BrianChambersUnique319
@BrianChambersUnique319 4 жыл бұрын
2011 ram dakota 3.7 l v6 is this the same flush procedure for the 2011 ram dakota 3.7l v6
@largegunfire
@largegunfire 3 жыл бұрын
I appreciate your video sir! Pretty sure you just saved me a lot of money 🙏🏾
@travisornellas5295
@travisornellas5295 Жыл бұрын
Question would the air bubbles cause the top hose to be hot and the bottom hose cold.i replaced thermostat,radiator,water pump and upper and lower radiator hose and i still over heat no sign of a cracked head i tested thermostat to see if it opens at heat spec and it does(i put it in boiling water)still i overheat with the same problem top hose hot bottom hose cold
@14thabz
@14thabz 3 жыл бұрын
Does the heater have to be blowing full blast also for this procedure
@bryanf7313
@bryanf7313 3 жыл бұрын
Can an adapter work to extend the bleed port higher up so as not to be as messy for bubbling? Like install a plug with a brass fitting and a piece of clear hose to watch the bubbles? Or possible downside of doing this?
@mase202
@mase202 Жыл бұрын
Hi i have the radiator cap off and the bleeder off and been waiting like for an hour for the air bubbles to go away its not as bad as when i started but i do still see micro bubbles. Should i wait untill it completely goes away or should it be ok to close everything? thanks
@brucegibson818
@brucegibson818 2 ай бұрын
Just bought a 2004 wj 4.7 . The threads on the bleeder are beat. Can I put an inline bleeder on the top hose and jb weld the plug on
@joeautorepairauto210
@joeautorepairauto210 4 жыл бұрын
Is this also the reason why I have no heat after replacing the thermostat and rad ?
@captainshartmark
@captainshartmark 4 жыл бұрын
Great tutorial! Thanks for posting!
@calvinmack206
@calvinmack206 4 жыл бұрын
Oh man thanks so much. My water pump was leaking and I replaced it. I tried just bleeding with the radiator cap open. Yea I need to do your procedure. I have a 3.7. Thanks so so much for your video bro. Oh Yea!!!
@calvinmack206
@calvinmack206 4 жыл бұрын
Update. I opened the bleed port when the car was cold. Filled in Antifreeze and ran the vehicle and looked for the air bubbles to stop. Then put the bleed port back on. Then I noticed the heater system worked. Good to go. After the car cooled down I topped up the coolant reservoir. Good to go. Took the truck on a 15 mile drive. Good to go. No leaks.
@calvinmack206
@calvinmack206 4 жыл бұрын
Thanks agin. It made a huge difference
@VMAFIA
@VMAFIA Жыл бұрын
How about just adding coolant to the reservoir? Do I still need to bleed it?
@sneekysmurf4754
@sneekysmurf4754 3 жыл бұрын
Love ur work brother straight to the point.
@lukeharper1439
@lukeharper1439 3 ай бұрын
Hey im still having issues did exactly what u said i have more air bubbles than i know what to do with also i have water shooting out bleeder like a foot and air bubble keep coming pls .advuse.
@joshuag2522
@joshuag2522 Жыл бұрын
I got a 2015 grand Cherokee Limited. It has the plastic bleeder valve on that thermostat housing. Can I do it the same way?
@epicpheonix14
@epicpheonix14 3 жыл бұрын
Do you still have to do this when you have a overflow tank and no radiator cap?
@Camisbam
@Camisbam 20 күн бұрын
Thanks for going back and making this video hahaha
@tommycroft5972
@tommycroft5972 2 жыл бұрын
I have a 2004 dodge Durango it's overheating bad I have changed the radiator cap and have plenty of coolant is there anything else u can give me a tip on wat might be causing it to over heat
Alex hid in the closet #shorts
00:14
Mihdens
Рет қаралды 19 МЛН
UNO!
00:18
БРУНО
Рет қаралды 3,6 МЛН
Каха заблудился в горах
00:57
К-Media
Рет қаралды 10 МЛН
from motor pierde fuerza p0300 misfires
5:01
Luis Hi Tech Auto Service, LHTAS
Рет қаралды 4
Water Pump Replacement/Full Coolant Flush - Jeep/Dodge 4.7L
13:52
D&E In The Garage
Рет қаралды 26 М.
Best 3 Ways to Bleed Air Out of Your Car's Cooling System
12:51
Ratchets And Wrenches
Рет қаралды 491 М.
How to SUPER FLUSH your Cars Cooling System
22:07
ChrisFix
Рет қаралды 17 МЛН
Dodge ram 1500 4.7L over heating.
14:33
G Auto Repair
Рет қаралды 28 М.
Dodge & Jeep 4.7L Valve Seat Drop Prone Problem
3:52
martinbuilt
Рет қаралды 158 М.
MOBIL AKI AZHIRA #shorts #mobilaki #car #mainananak
0:19
AZHIRA SYAFIA
Рет қаралды 9 МЛН
ОПАСНАЯ ВЕЛОДОРОЖКА СТОЙ ⛔️
0:18
Леха МАК
Рет қаралды 1,8 МЛН
Разрядили аккумулятор за 100 км #shorts
0:32
auto_shorts_everyday
Рет қаралды 5 МЛН