DESLUDGING My Dodge Dart Engine From Totaled To CLEAN

Рет қаралды 333,268

2 жыл бұрын

I bought a cheap 2013 Dodge Dart SXT to rent out on Turo. When I bought it I was told the maintenance was always kept up with and it was ready to go. There was basically nothing wrong with it but a slow valve cover leak, until ‪@TylerPotter‬ and I pulled the valve cover off... thats when we found the engine full of sludge. Today we're going to clean the engine out with BG Dynamic. It's a chemical treatment that removes sludge with a multi-step process and makes the inside of old engines look incredible.
BG Dynamic: www.bgprod.com/catalog/engine...
Lifetime BG Protection Plan: www.bgprod.com/programs/lifet...
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make KZfaq videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#DodgeDart #CheapCar #Sludge

Пікірлер: 811

@WatchJRGo Жыл бұрын

WATCH THE NEXT VIDEO IN THE SERIES TO SEE THE VALVE COVER OFF... I've gotten 5 million comments about this and have responded to all of them, but they keep coming. The engine was flawless inside, just like it has been every time I run Dynamic.

@josephwu3136 Жыл бұрын

Show us the bottom end with the oil pan off. Just take this video down. It’s terrible. Waste of time and life

@monunyabidness5949 2 жыл бұрын

The lack of before and after images of *this particular engine* is a disappointment.

@Diabolica843 Жыл бұрын

That would make too much sense

@Moondoggy1941 Жыл бұрын

The magic of opening and closing the hood. Bam

@engineprojects Жыл бұрын

Agreed

@nomad4x Жыл бұрын

I was about to make this comment.

@aboodmki3 Жыл бұрын

It is not a disappointment it says a lot about asking chemicals to fix an engine

@jameskoralewski1006 2 жыл бұрын

If the oil drain bolt is dripping, you don't fix this by tightening the bolt tighter. You install a new crush washer to stop the leaking.

@mintycbo Жыл бұрын

I'm not criticizing anyone. The gentleman knows his business, but having spun my share of oil plugs.... The electric ratchet had me on the edge of my seat. hehe

@thunderods7228 Жыл бұрын

The drain plug doesn't have a crush washer. New MOPAR drain plugs have a rubber insert which is not replaceable.

@skurblord3401 Жыл бұрын

@@thunderods7228 Not just Mopar. Most USA companies have switched to that. Ford, GM, Dodge, etc.

@CenPapi Жыл бұрын

@@thunderods7228 then just get a new drain plug? $5 maybe $10?

@steven4894 Жыл бұрын

@@thunderods7228 🤣

@iamthelinkinator 2 жыл бұрын

BG brought back my '04 Silverado's 5.3 from almost 300k miles with cracked heads. Boiled off dexcool formed a sludge in the oil, engine was a mess. Zero oil pressure. We changed heads and ran high quality oil 800 miles for 3 changes in a row. Would still knock loose larger sludge and clog pick up tube. Decided to give it one more shot with BG. At the final flush it came out clean. Engine is sparkly clean and truck has since run 20k miles trouble free with perfect oil pressure. I'm a believer, BG is solid.

@user-pq6mr6op3p Жыл бұрын

Bullshit

@84gssteve 2 жыл бұрын

If it was me, I'd pull the oil pan and clean it, and especially clean the oil pickup screen. Not all that solidified sludge will have dissolved to be filtered out, and if enough of it ends up in the pickup screen, its goodbye engine!

@andreyt1436 2 жыл бұрын

Blow this up! Exactly what i was thinking!!!

@tikiman48 2 жыл бұрын

Not with that engine flush

@leinad20002 2 жыл бұрын

Can’t do that, oil pan gasket is $50.

@danielseelye6005 2 жыл бұрын

@@leinad20002 He said _valve_ gasket was $50 and RTV'd in. Don't know what the price is for oil pan gasket

@garys9694 2 жыл бұрын

@@leinad20002 Like he didn't make that from the income from the content? BS!

@snorkosaurus 2 жыл бұрын

I'm sure BG would sponsor that gasket if you showed the endproduct....

@tinok.8149 2 жыл бұрын

Whats the point of going through all that and not pulling off the valve cover in the end to see the end result...?! Should’ve left the old valve cover gasket then changed it after the test.. 😖

@glassvial 2 жыл бұрын

I don't think the sludge problem was known until they took the cover off in the first place.

@derekgardin1512 2 жыл бұрын

He should have pulled it off to see and show it and just put it back on. If it was leaking again, order another one. Maybe he would have got lucky and it would have been fine when put back on with the same (new ) gasket

@IKhanNot 2 жыл бұрын

He didn't know about the sludge problem until he went to do the valve cover gasket.

@steven4894 Жыл бұрын

No kidding! 🙄

@anortiz94 2 жыл бұрын

FYI: regular Wix filters are better than their XPs. The regular ones filter down to a finer micron level. The XP ones sacrifice some efficiency for the ability to do long drain intervals. Unless you’re doing extended OCIs, the regular Wix filter is better.

@g_unit6773 2 жыл бұрын

Are you certain about this? What are numbers/microns? I do know that regular vs XP uses different filter material so this does seem plausible

@derekgardin1512 2 жыл бұрын

@@g_unit6773 it's true. They leave the passages in the extended filters bigger so they don't clog up over the long OCI and prevent proper oil flow through the filter.

@died4us590 2 жыл бұрын

I use the regular for the same reason, plus I do oil changes at 3000 or less miles. I have seen a lot of forum's talking about the xp filters and how they aren't as good.

@sugarbooty 2 жыл бұрын

I believe its 20 micron for the normal and 30 for the XP

@FIVEVEEZEE 2 жыл бұрын

@Truth Teller post a video!

@robertvanderbush737 Жыл бұрын

FYI, scantools can do more than just check/clear codes, they can also command RPM using special functions so you don't have to jam a 2x4 into your nice seat

@Doomster9 2 жыл бұрын

Since you don't want to remove the valve cover again for obvious reasons, why not remove the oil pan since it needs to be resealed anyways? You could show the current sludge or possibly do it at the next oil change? Good content!

@user-hs9gp7po9t 2 жыл бұрын

Snake Oil. There is nothing worse than a KZfaq channel selling chemicals you can put in your car promising miracles.

@charlesbosse9669 2 жыл бұрын

@@user-hs9gp7po9t I was wondering that same thing. I have a 2013 Dart, and I would be er let it set running at 3000 rpms for 45 minutes. Sounds like trouble to me.

@IanO3 2 жыл бұрын

@@user-hs9gp7po9t It's not snake oil and it actually works. I've used it personally.

@darrengriffith9680 7 ай бұрын

Seems like letting a car run at 3000rpm for 45 mins with no airflow isnt the brughtest choice, i agree. @charlesbosse9669

@300DBenz 2 жыл бұрын

On that Autel scanner, you can pull down that tab on top of the screen to go to the setting menu and change the units from metric to imperial.

@reelman4299 Жыл бұрын

Sad to see a newer car treated like this. I think the BG products are excellent. Reminds me of when I bought a used 1979 Celica GT in 1987 to drive back and forth to work. The original owner had done 3 or 4 oil changes in 8 years. Surprisingly the car ran pretty good. The 20R engine was bullet proof. A trusted old mechanic told me what to do to clear some of the sludge. I drained the oil, changed the oil filter, added 2 quarts cheap oil and 3 quarts of transmission fluid. I drove it around for a couple of hours, not revving the engine. Drained the oil and was amazed at the chunks of sludge that came out. I did this once more in a month. I ran cheap oil in the car for the next 3 years. I was told that ATF had high levels of detergents. In 1990 I traded it in for a new Isuzu pickup. Keep the content coming!

@cousinjohncarstuff4568 2 жыл бұрын

Order a valve cover gasket and oil pan gasket. When it comes back from rental, pull the valve cover and oil pan. Then we get to see the results on a delayed basis.

@jameskoralewski1006 2 жыл бұрын

The best way to clean sludge out of your engine is to change the oil often enough so you don't get sludge to build up.

@Thekidsinafrica14 Жыл бұрын

A better faster way is to run diesel in it. It’ll keep everything lubricated and still break down all the sludge

@okopnik Жыл бұрын

@@Thekidsinafrica14 Yep. Leaves the engine squeaky-clean inside... it's a great solvent, especially if you let it sit in there for a few hours after turning the engine over a few times. Flush it twice, and it looks brand new.

@Vyker Жыл бұрын

You'll be saying goodbye to your rubber stem seals if you do that

@okopnik Жыл бұрын

@@Vyker Who the heck uses rubber anymore, especially inside an engine? All neoprene these days, as far as I know.

@whitbyretreat145 5 ай бұрын

The topic is after the fact Mr. Obvious

@rucebaybruce6174 2 жыл бұрын

I just add a quart of kerosene when I changed the old, sludgy oil. Run it for 30 minutes, drain. Change oil and filter. Worked like a charm.

@justinsane7128 2 жыл бұрын

Yep or a qt of ATF...

@user-kf8ry8qr9h 4 ай бұрын

old school way but works great, My pop taught me that in the 1990,s....

@kensimpson8133 2 жыл бұрын

Kind of curious, what that old filter looks like cut open. With all that sludge moving around.

@GenMaster124 2 жыл бұрын

I’m sure me and others would like to see the rocker cover back off….to see if the sludge has gone 🤔

@dickfitzinya3082 2 жыл бұрын

I’m sure the results aren’t nearly as good as BG wants you to believe. The small amount of sludge that was removed is now in the oil pan.

@drewnickel2423 Жыл бұрын

I know right?

@Gersberms Жыл бұрын

To be fair, those two drains he did were very dark. I wouldn't do this on a car with an engine in half decent condition though! Seems pretty severe, to run for over 1 hour at 3k RPM in neutral. Everything will get super hot under the hood without outside air flowing by.

@victorburton4886 Жыл бұрын

No after pics don't like

@centraliowaoutdoors Жыл бұрын

The bg dynamic kit actually works incredibly well. It is very expensive though. We had to put an engine in one of our shop vehicles and the new to us engine was pretty sludged up. Used this kit and every little nook and crany looked brand new. I was very skeptical at first but after seeing that I'm a believer.

@IKhanNot 2 жыл бұрын

I wonder what oil the previous owner used and how long they went in between oil changes. I just did the valve cover gasket on our 14 year old Nissan Sentra with 145k on it and the top of the motor was squeaky clean at the corners, cam lobes and lifters. I'd buy the cheapest 5W30 conventional oil on sale (usually Castrol GTX or Supertech) and change it regularly. They must have really gone a long way between changes because cheap oil, once changed regularly, works great.

@sheputthelimeinthecoconut629 2 жыл бұрын

I’m deeply disappointed that you didn’t take the valve cover off to show us the result. 😢

@frostyflake1128. 2 жыл бұрын

Go watch the Camaro video!

@sheputthelimeinthecoconut629 2 жыл бұрын

@@frostyflake1128. I did- when it came out. I wanted to see this particular engine.

@frostyflake1128. 2 жыл бұрын

@@sheputthelimeinthecoconut629 that's fair

@stevenc6256 2 жыл бұрын

He did state that a new seal was very expensive. Makes sense to me.

@beitie 2 жыл бұрын

This was really cool. I bought a 2015 Dart GT in 2016, I've owned it since it had 62 miles on the odometer. It's been very reliable, though I will have to address some coolant leaks soon. I'm really not looking forward to that. I'm not sure if there is a lot of differences between the 2.0 and 2.4 when it comes to the cooling system, but my car has hoses all over as if it were an early 90's car with vacuum hoses. I's crazy complex.

@jamesavery1879 2 жыл бұрын

I don't know why but I love watching the BG engine clean videos.

@richardwasserman 2 жыл бұрын

I had an old Nova that I never changed the oil on. Just added oil when needed. Eventually, the oil return passages clogged up and I had to do something. We pulled the rocker arm cover and manually removed as much sludge as possible. I then added a quart of diesel fuel to the oil. The car smoked like a banshee for an hour. Then I changed the oil and filter. The car ran for another few years with no problem.

@ChrisCollins-Oakland 2 жыл бұрын

My neighbor's grandpa smoked until he was 94, so there is that too.

@EweToobUsername 2 жыл бұрын

My dad had a Dodge Omni that got to that point. Added a quart of the thinnest oil he could get once every 2 months. When the car finally crapped out on him after 7 or 8 years (clutch failure), we pulled the engine out and it was surprisingly clean inside. A couple of oil changes while it was on a stand and it went into his buddy’s dune buggy with a Getrag 5 speed and a 2 barrel Weber carb.

@andrewhigdon8346 2 жыл бұрын

I remember being told to slowly pour ATF into the running carb on my ‘71 Torino. It smoked so badly you couldn’t see the car while it was running for like twenty minutes. A little embarrassing in the neighborhood when you’re 16. And stupid. It did free up a couple of collapsed lifters. Did nothing for the valve stem seals.

@albertagibinik3436 2 жыл бұрын

That was older diesel formula, new stuff is not as slippery.

@richardtrowell8812 Жыл бұрын

@@andrewhigdon8346 My dad was a mechanic and used to Spray ATF mixed with water into carburators to burn out carbon buildup. Sprayed it until motor would big down and then wait until rpm went back up. Said the added water would make it burn hot enough to remove the carbon. Had to know when it would actually help. With diesels you add ATF to gas to stop black smoke from exhaust when climbing hill's. Same idea. Removes carbon buildup on valves.

@CARMEKANIK 2 жыл бұрын

awww come on, was looking forward to seeing that valve cover off...

@kerrylewis2581 2 жыл бұрын

I have been a fan of BG products for years. It's cool that JR is within walking distance of their facility.

@kongchingpow 2 жыл бұрын

I love that you almost always work on cars without getting filthy :) that's true talent!

@camojoe83 Жыл бұрын

-talent- *fake* Fixed that for ya

@steven4894 Жыл бұрын

@@camojoe83 😂

@jeffschroeder1420 2 жыл бұрын

Wondering if there was any change in oil pressure after the clean, also film the next service!

@icanfartloud 2 жыл бұрын

Duralube Fuel Treatment is the best gas additive, period. It cleaned 6 year old gas out of my 3 carb jetski. The mech recommended a $400 carb job because of no throttle response. Let it soak in carbs for a day. Ran one bottle with 3 gallons of new gas. Throttle response returned to normal. I also use Duralube engine treatment every 20thou miles. My Tacoma has 260thou miles. Inside engine clean as a whistle

@LouisWritingSomethingCrazy 2 жыл бұрын

Didn't know this was around. Thanks for this, it will help me out.

@philc824 2 жыл бұрын

Are fumes just going into the garage with no hose ?

@georgemolwitz7112 2 жыл бұрын

Looks like a real success. My Jeep has a 5.7 hemi that I will try the BG MOA to keep the MDS system clean since I did an oil flush already.

@dlinemusic 2 жыл бұрын

Love these BG videos

@GrahamCampbell-kr2gz 2 жыл бұрын

Use the borescope through the oil filler to see inside the valve covers

@VideoRanger 2 жыл бұрын

You need an exhaust extraction system for your shop.

@warriormanmaxx8991 5 ай бұрын

Any other ... "recommendations" ?? Ehhh?

@georgegrierson 2 жыл бұрын

Excellent product... Something I do to minimize sludge buildup is to run Seafoam @ 500 km before my oil change. It seems to carry any sludge residue away and the engine looks awesome inside. I don't think Seafoam would accomplish what your product does when the engine is severely impacted with sludge.

@matthewpeterson3329 Жыл бұрын

Wow, you and I have the same recipe. I Have been doing this for years... one ounce of sea foam per quart of oil in the crank case, and one ounce of sea foam for every gallon of fuel in my tank. The Silverado 5.3 V8 is a 6 quart system, and my tank is 25 gallons, so 2 cans of sea foam at 16 ounces is perfect ( the additional ounce goes in the fuel). I have 260k miles on the truck and had the oil pan off recently to reseal it... it is nearly spotless inside. I am a true believer in Sea Foam! It's a great fuel stabilizer for motorcycles and lawn mowers too.

@greathornedowl3644 2 жыл бұрын

Keep the DART going, it is the bread and butter of the fleet. Wow, wearing his own merch, should have been sponsored by BG

@bikeman1x11 2 жыл бұрын

definitely running well for FCA product

@lieberfreialsgleich Жыл бұрын

Before I change the oil on any engine, I always let them run 15 minutes with 1 L Diesel in the engine oil. It cost 1$ and the engine is clean! My experience and what I learnt from my grandfather 40 years ago.

@someone28 2 жыл бұрын

*2011 lmao, twice JR, you made the same mistake twice. Thank you for the laughs. Love you man.

@frankthespank 2 жыл бұрын

Would this stuff help a 2014 Kia Sorento engine that’s consuming more oil than I’d like? It consumes a few quarts of synthetic oil between oil changes and I change the oil around three times a year at about 5,000 miles. Usually once in the winter and twice in the summer.

@jamesemcclure 2 жыл бұрын

Next oil change in 3000 miles change the oil pan plug crush washer. Make this a habit and you'll save yourself a headache.

@mitchellmanor1970 2 жыл бұрын

Hi JR, long time subscriber. I use BG's EPR. Do you know what the difference between BG Dynamic Engine Cleaner & Rinse Oil and EPR? With EPR you add it to your existing oil, run the engine for 20 minutes and then drain and change the oil and filter. I have done this on my used camery hybrid since I bought it a year ago.

@exlimey1417 2 жыл бұрын

We have a yard-truck at work that routinely goes 10k over on mileage for an oil change and spends most of the night sitting idling. Hate to think how bad that is inside. I will give it to Ford, that thing has been neglected but still going with 243k on the clock.

@Scooter30FTW 2 жыл бұрын

You were running it inside for 44 minutes? You were running those exhaust fans,right?

@tateswensen8407 2 жыл бұрын

Love your videos. I know you use Motul oil a lot. I have been using Royal Purple in my cars. My niece just got a 2014 passat TDI and I am going to help her service it. Is the Royal Purple 5W30 ok or should I order the Motul. I can't find it locally so I'd have to order it. Thanks

@hadilkilani 2 жыл бұрын

Keep up the amazing work bro

@Maybe1Someday 2 жыл бұрын

This is a good test since its going to be rented. I want to see how many miles can be put on a car like this. I also believe any car rented on a third party app like Turo should be a branded title car with only one rental.

@andrewkessinger5966 2 жыл бұрын

You should be able to change the units on your Autel to SAE in the settings menu. I have a similar scanner and was able to do it while it was connected to my computer for a printout.

@taunuslunatic404 2 жыл бұрын

Or he can learn the metric units. 1 bar = 100kPa 10 psi = 0.7 bar It's not very difficult.

@lunisce 2 жыл бұрын

@@taunuslunatic404 Fuck metric units, we use freedom units around here

@taunuslunatic404 2 жыл бұрын

@@lunisce 😆

@bg365 2 жыл бұрын

@@lunisce Unless you’re in the military, then you use metric. Does that mean metric keeps you free?

@mr_jake.y8348 2 жыл бұрын

Good job JR you do take care of your cars and trucks.

@megatronstoner 2 жыл бұрын

Wow just caught a glimpse of the obs ford. Man she looks good now! What a difference a little love can make!

@edgewood99 2 жыл бұрын

Nobody comments on the EXHAUST into the BUILDING?!? Where are the extraction hoses?

@TheBarberShopScott 2 жыл бұрын

The building is an extraction hose lol

@MatthewTyreeKS 2 жыл бұрын

Hey JR, I also live in Wichita. Where can you buy the BG Dynamic Engine cleaner and rinse oil locally? I'm looking online at BG's website, and I can't find a way to buy it.

@jean-marcandjoshua-petsjournal 2 жыл бұрын

Looks great, good job JR.

@dirtyboy8336 7 ай бұрын

Hey I have a question JR The problem I’m having with My 99 Dodge Ram 1500 5.2L it Never read the dipstick at all nor show any oil on it. and I change the oil cinder sensor new filter and oil but when I drain the oil only one cord of oil comes out and I been put like 5 to 6 cords in oil light still beeps 😔

@ahmadghosheh3104 Жыл бұрын

I used the small cleaner can from BG on my 03 Camry with 285K. It didn't have sludge at all but wanted to have cleaner oil what a difference. I am sold

@lesterntomson4988 2 жыл бұрын

Just bought a new to me vehicle, I am wondering if the detail shop is still going or if I am needing to utilize the other people in town. 2018 jeep, some paint and under body work, ceramic coat, and a detail. Thanks 👍

@jeffrrey6791 2 жыл бұрын

I have a buick park avenue with 254000 miles on it think I can use all of these treatments without hurting my engine?

@died4us590 2 жыл бұрын

Wow, i have that same tool for holding down the gas/brake pedal when needed, work's like a charm. I bet 100% jake has this same tool on a budget, from all the comments that he makes about building up his tool collection. Liqui moly work's well to, m539 restoration used it on one of his bmw's, and it cleaned it really well. I use the bg 44k on my kia soul because the dgi engine's need the cleaning solution to keep them from using oil from all the deposits. I bought a case of 12 kia filters to be able to use the bg product's, and the moa. My car only has 7200 miles since i bought it new in april of 2019, could have gotten the 2020 for the same price, but i hated the body style change which now looks like any other mid size suv. Hope this car gives you many more rental trips.

@juliobello4561 2 жыл бұрын

Liquimoly and BG are amazing totally worth it. Liquimoly help to solve my oil consumption of my 2015 Camry 2.5 EPR worked amazing in my dad Escalade 6.2 notorious for oil burning save the oil pressure sensor life lol

@died4us590 2 жыл бұрын

@julio, I am glad someone else knows how well this stuff work's. The dgi engine's get dirty and carbon up the valve's, which then causes oil consumption, but these product's clean well, restore oil pressure, and stop oil consumption as you said. On my new kia soul, i used this right away, because i don't want a nasty sludged up oil using mess in the engine lol. God bless.

@TechCrazy 2 жыл бұрын

Interesting product. I have also heard that a quart of ATF also dissolves the sludge. But, it might change the viscosity of the oil which could cause problems with seals and such. So this product must have the same viscosity and yet have powerful dissolving agents.

@brandonupchurch7628 2 жыл бұрын

Modern ATF doesn't do squat as a flush, it's essentially 0W-8 or 0W-16 motor oil made with severely hydroprocesed mineral bases that are effectively "dry" base oils with less additives than motor oil, ATF was once useable as a flush because it contained sperm whale oil which is an ester oil and naphthenic oil which has a good deal of solvency, modern transmission oil is using either grp 2+ or grp. 3 mineral oil bases, or some expensive botique oils or HD truck fluids like Allison TES-295 may contain PAOs but these are all really dry base oils and don't have much solvency, ATF really doesn't need to have any detergency because it doesn't deal with combustion contaminants.

@Precisionreelworks 2 жыл бұрын

After watching your Camaro video with BG, I used their EPR on my 1958 IH tractor. After the EPR and a fresh change with Rotella it runs like a sewing machine!

@justinsane7128 2 жыл бұрын

I've been to four Walmarts in the last few weeks and there is no t6 rotella anywhere in Colorado

@Precisionreelworks 2 жыл бұрын

@@justinsane7128 my local O'Reilly's price matches if you show them the Walmart price on your phone. I've been using straight SAE30 in this old girl (T1)

@revbikerbigd8664 2 жыл бұрын

Would like to see this tested on a 2002-2006 Toyota Camry 2.4L with gummed up piston rings and see if it stops smoke and oil usage!

@CoachKepler 2 жыл бұрын

Why? So they last another 300,000 miles? Lol

@juliobello4561 2 жыл бұрын

I try it the epr in my 2015 Camry which I used for lyft before i stop doing it. I have the 2.5 but 2018 I didn’t move my car all year I was using public transportation since I was working in San Francisco but when I run my car on the weekends it burn oil. I used the liquimoly flush which worked amazing to clean the burned oil and in November I try the epr and my oil came close to when he did the second flush and smelled horrible too but my engine runs like new and is quiet. Before it had little ticking noise

@stevenc6256 2 жыл бұрын

I may have missed it, but what causes all that sludge to begin with? Lack of maintainance, poor oil, low oil??? Thanks

@nathanielbonde7716 Жыл бұрын

So what type of oil were you running in this motor to cause such sludge?

@Takethatakethatakethat 2 жыл бұрын

Love that Spanish greeting from the parts guy! Haha that’s how you know they love you 😂

@robertm5969 2 жыл бұрын

What's the long term plan for the warehouse? Will you turn it into a shop and work on customer cars or just personal projects?

@Veldkamp88 2 жыл бұрын

I'm curious if that would help the lifters to my 99 Grand Cherokee Laredo or improve gas milage

@mathewhastings9485 2 жыл бұрын

You know if you change your oil like you’re supposed to, you can avoid a sludge problem.

@martin1649 10 ай бұрын

not possible when buying a used car

@pittypat1607 2 жыл бұрын

Whoa whoa whoa. I waited all the way till the end just to see that valve cover come off. 😂 come on taking that cover off is KZfaq content.

@matthewreed1078 2 жыл бұрын

Man I don't understand how you don't have a million subscribers you're videos are so awesome man keep up the hard work man

@31dknight 2 жыл бұрын

Great video from JR.

@PhilGoh23 Жыл бұрын

how much does it cost for all the materials to desludge the engine?

@DarkShadowsReviews Жыл бұрын

If the vehicle takes let's say 8 quarts and you fill it with the dynamic do you top off what's remaining with engine oil?

@woneil111 Жыл бұрын

So, what would it look like to run TWO rinse oils through the system I wonder. And, could it be done?

@unclejoe6811 2 жыл бұрын

I run half a bottle of engine flush just before every oil change, my engines are always spotless, never had any oil burning etc.

@MegaBluebone 2 жыл бұрын

A dealer would total that engine?!? That shows you just how incapable and inept dealer mechanics are.

@07slowbalt 2 жыл бұрын

Its not that they're inept its that the dealers are trying to maximize profits. To have a car in the shop that long while other vehicles can be dealt with takes from their revenue stream. It also ensures that they get to charge a customer for an entire new engine instead.

@CoreMaster111 2 жыл бұрын

How much longer would this engine last anyway at this point? If it's sludged up then obviously previous owner/s didn't really care much. If you remove the sludge you may end up with an engine that now rattles because it's worn out and or starts leaking oil from everywhere, including burning oil. It would be just matter of time before that car would be back at the dealership with angry customer. Not worth it unless you are doing it for yourself.

@mitchelldrake3378 2 жыл бұрын

What are your thoughts on amsoil?

@JimFlanagan4206 2 жыл бұрын

Can your Autel be used to hold engine RPM in neutral?

@steven4894 Жыл бұрын

Of course!!! 🙄

@thesnipersnestandmore7461 5 ай бұрын

What do you do if you’re doing a car that uses more than 5qts of oil? Do you mix oil with the cleaner and rinse?

@EAADetailing 2 жыл бұрын

I remember back when you were let go from your job flipping cars in your driveway man, love to see your progress!

@BW-kv9wj Жыл бұрын

After the BG service, I’d do an oil change with cheap synthetic and run it for 5 miles and change again. I’d keep doing it until the oil is clean when drained. Then add Amsoil.

@asrielandcharadoesstuff4789 Жыл бұрын

I would change it in 2000 and another tip to push the dirt out of the bottom of your pan is to make sure it's perfectly level and keep a cheap quart around regardless of what anyone else says heavy or metallic particles are going to go to the bottom and not stay suspended

@craig357 26 күн бұрын

This is great to see. Just ordered the BG EPR 109 as managed to clean a lot of crap from my 2ZZ GE (previous owner neglected it) with a few previous flushes (Forte/Liquid Moly). But going to use the BG EPR before going this route and hopefully I won't have to. But 3000/5000/1 year mile oil changes I believe are the way to go, despite what manufacturers claim is the correct oil change miles, to minimize sludge and prolong the life of the engine.

@stephenbrown2484 2 жыл бұрын

Bought a 96 1mzfe Camry collector edition. Had so much sludge you couldn't even pour oil in the filler cap. I removed a glob of sludge from the fill hole. I didn't even need to know what the valve train looked like. I changed the oil to syn blend. Used tranny fluid 1 qt gradually. Marvel mystery oil second oil change. No clogged pick up tube but smoke on start up after sitting. Figuring I had not so much to loose I used diesel oil 15w40, we live in Florida. Went back to conventional oil. Big difference. Gradually cleaned the valve train. Still burns oil and smokes, but that black sludge color would go away. The Toyota V6 even 1996 ones are known sludgers. Short stop and go trips promote sludge as oil does not get hot enough to evaporate the moisture produced by the combustion process.lack of oil changes and a engine that runs too warm.

@Vikturus22 2 жыл бұрын

AH yes another BG video. Best stuff to use!

@mabisaillon 2 жыл бұрын

Good video, you don't have some pipe for exit exaust gas.. of garage?

@michigangeezer3950 2 жыл бұрын

As a kid of the 70s and 80s, that level of sludge is for amateurs. Good old malaise era engines seemed to have that much sludge installed at the factory.

@stuartbear922 2 жыл бұрын

In the 70s & 80s we traded cars at 50k miles. They were that bad. Getting 100k miles out of one was unheard of.

@DeathDealer1825 2 жыл бұрын

@@stuartbear922 that's why cars from then will still run after sitting in a field for 10 years if you did that with any new electronically controlled car you wouldn't get 2 years of sitting time before things fail on them

@mitchhedberg4415 2 жыл бұрын

@@stuartbear922 78 Cutlass Supreme, little V8, 120k reliable miles for me

@dirtyboy8336 7 ай бұрын

I don’t think my oil pan ever been dropped before for new oil pump or filter would this product kit work for my vehicle? Because now I have a loud, clicking sound like the lifters inside of my oil pan

@axios76 Жыл бұрын

Where did you buy this from? I can not find it on any store.

@johnjenkins8782 2 жыл бұрын

Did the oil pan leak get any worse or did any new leaks start??

@19supra86 Жыл бұрын

Where can you buy this stuff? because all I’m getting is that it’s for dealers and shops only

@chrispy3866 2 жыл бұрын

I feel like doing the treatment one more time after a hundred miles driving would really finish the job.

@danv6833 2 жыл бұрын

I have a 2013 dart with 90k miles. Might do this thanks for showing how.

@thebeddoctor4273 2 жыл бұрын

I dont see prices on their site. Is it shop only?

@charliecoco2115 2 жыл бұрын

I've always used diesel 50/50 mix with cheapskate oil as a flush, never had a problem in 45 years.

@connorb9097 2 жыл бұрын

Even on new engines?

@charliecoco2115 2 жыл бұрын

@@connorb9097 Nah, only once they're around 6 years plus.

@brugster75 2 жыл бұрын

Hey JR, couldn't your Autel set the rpm to 3000 and hold it?

@WatchJRGo 2 жыл бұрын

Nope, I expected it would and checked every page... no option for set RPM (usually there is) 😢

@OntopRob 2 жыл бұрын

Bg is the best product on the market for sure.

@steven4894 Жыл бұрын

Liqui Moly Engine Cleaner, Amsoil Engine and Transmission Cleaner, Marvel Mystery oil. Gumout Multi-System Cleaner. Seafoam works okay too. All are great flushes that are neutral to soft rubber parts.

@davethorn8042 2 жыл бұрын

Awesome ..... Oil Sludge Removal .... a few years back a local shop wanted to charge me $325.00 to do that ... now I know what product to use ..... Love your Vids ... cheers

@insaneiaq 2 жыл бұрын

Should have done it. They probably charge $500 now lol.

@boostedmaniac Жыл бұрын

How is running it in neutral Any different than park?

@donreinholz8121 2 жыл бұрын

So this is the result of not changing the oil every 5K? Is that a $200 treatment? I'm taking off oil pan and cleaning the whole inside and pickup screen too. Old timers used to run a bottle of Marvel mystery oil for upper cylinder lubrication.

@Lions7.62mm 2 жыл бұрын

Was there a reason you didn't vacuum remaining sludge/oil from the bottom of the oil pan after you drained it? Wouldn't that have helped get more out of the system?

@derekgardin1512 2 жыл бұрын

I'm sure most un the pan dissolved if the top of the engine got as clean as it did.

@gamerjunction5335 2 жыл бұрын

I have used some Marvel Mystery Oil in the past to good success. Like with Sticky lifters. Put a half quart or so in a few hundred miles before you change your oil Just make sure you don't overfill the sump. Of course, I never had a Sludge situation, as I change oil at regular intervals.

@juliobello4561 2 жыл бұрын

I tried EPR and 44k in my 133k Camry and I was shock how clean it left my engine and is running smooth like new and got 2-3 mpg back which is good product next with liquimoly are my two to go brands