Detailing a car : Machine Polishing Cut and Finish Demo No Edits

Рет қаралды 13,447

2 жыл бұрын

S0 Matting Compound (removing sanding marks deep cutting but leaves haze)
S2 black or S3 gold XXL (high cut but good gloss)
S30 finishing polish (high gloss finish remove machine marring from cutting on this soft paint as well)
Products available here: (try code forensic for 10%)
tinyurl.com/4msd9755
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

Пікірлер: 44

@ForensicDetailing 2 жыл бұрын

You should check out my MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS This covers everything you need to know to get up and running with detailing your car properly ioa.pxf.io/c/2687409/1012495/12764

@DjNikGnashers 2 жыл бұрын

It's hard work ! Thanks for showing us just how laborious it is, no wonder a full paint correction takes days.

@theTHiiiNG 2 жыл бұрын

Just used the exact same Scholl polish and pad combo on my car. They did an amazing job!

@1881Gordon 2 жыл бұрын

VAG Paint in all its Loveliness! Great demo of Technique, Products & various Polishing/DA Machines.

@yohanmejia897 2 жыл бұрын

Keep up the good work man!👍🏽

@DavidC1 2 жыл бұрын

like this style of video, great work

@gwen0437 2 жыл бұрын

Nice to see the Dewalt getting a work out great machine lots of power.

@petethompson1282 2 жыл бұрын

Nice one Im doing this right now panel by panel a day at a time. Ive got G3 paste for deep scratches ont he soft mazda paint, then G3 premium as seen in your other videos with their compound mop then i did finish up with their polishing head and g3 premium but decided to go G10 finishing polish instead as thats its one job. Car looks great and loads better than the ultimate compound and polish I was using, its really good value and what the paintshops use. Theres a new 360 range i havent tried but if you test it ill be watching.

@lalman5140 2 жыл бұрын

it"s knowledgeable video. god bless you sir.

@fareezmohammed8906 2 жыл бұрын

this is good stuff

@mckav2358 2 жыл бұрын

This is excellent - get to see the pro show how its done

@steveh9089 2 жыл бұрын

Hi John good little vid, I see this is not your own garage, is this the place you mentioned don’t time ago where you can hire a studio for the day, either way can you tell me where the place is that do hire a studio out for own use. Many thank Steve

@connorallen1549 2 жыл бұрын

Hi mate I’m looking to buy my first da machine and was wondering what machine I should get between the flex & dewalt, of coarse the flex do a smaller machine but dewalt doesn’t so could your please advise me and keep up with the work you do 👍

@ForensicDetailing 2 жыл бұрын

Dw for cordless free spinning da. Flex for forced rotation da.

@OzoneVibe 2 жыл бұрын

Any particular reason you used cordless for the first two applications, then mains for the last?

@theusbondezan 2 жыл бұрын

Probably because he realized the battery was low and they didn't have a spare one handy. Also, some people use one machine for cutting, another for polishing. It just make things lil faster sometimes.

@ForensicDetailing 2 жыл бұрын

What advice would you give to anyone polishing for the first time?

@frasercarlyle8575 2 жыл бұрын

Patience is key and every car's paint softness etc can be different

@SilverTrill 2 жыл бұрын

In my case don't buy all the top equipment when you don't have a place to machine polish 😭😭😭 wish I had a garage

@garyredmond1890 2 жыл бұрын

Like a lot of things in life, good preparation is important. Don't rush it, you'll only end up putting in a lot of time and effort to achieve a substandard result. You don't need to get the whole car done in a single day, you can do a section at a time. Ensure you working area is clean and well organised, a messy haphazard environment will impact efficiency and increase fatigue.

@simonb6306 2 жыл бұрын

Save some money. Watch John’s course be here paying for a single machine or compound. Man I spent some money on junk before getting the right stuff.

@zaink7037 2 жыл бұрын

Watch your beginners guide videos to polishing, have a clean panel and equipment, test a panel and see how it comes iut

@Shamimfarsi 2 жыл бұрын

What's the model number of your cordless polisher? So good that works with battery and not with cable. Is it DA polisher?

@ForensicDetailing 2 жыл бұрын

thats a dewalt 848x see my review on the channel

@Shamimfarsi 2 жыл бұрын

@@ForensicDetailing Thank you Jon. I just saw it. Amazing polishers. And it's good to have two batteries. You may charge the first one while using the second one in case you need to repolish for a third time.

@zaink7037 2 жыл бұрын

Hi Jon. Got my car back from the bodyshop as some uninsured idiot lost control and hit it. The rear quarter which they sprayed is a little lighter than the original paint. I'm thinking I might polish it with menzerna then finish it off with britemax blackmax as that I think may of darkened my paint on the other bits

@ForensicDetailing 2 жыл бұрын

sounds like poor color match mate. I would consider taking it back buffing can gloss it up but its not really going to align the difference in finish perhaps.

@zaink7037 2 жыл бұрын

@@ForensicDetailing thanks Jon. Its not too bad only in the sun. Will give it a polish and finish it off with the blackmax to hopefully darken it

@teofilogidelanastaciorojas 2 жыл бұрын

@@ForensicDetailing muy espectacular una joya con el acabado.

@markopolo9936 2 жыл бұрын

Me while Jon whistles: WEST VIRGINIAAAAAAA!!!!

@ForensicDetailing 2 жыл бұрын

was john denver wasnt it :)

@Fantic1980 2 жыл бұрын

I love Scholl but their naming convension and pad colour combo is so confusing! So blue pads are heavy cutting pads, I have a couple of sider pads. However the blue ninja pads, are finishing pads?! They also don't recommend S40 on the finishing pads because of the foam construction, and instead recommend the Orange pad, which is a polishing pad ... so confused. I know you can uise them in all sorts of combos but Menzerna have this down to a tee!

@ForensicDetailing 2 жыл бұрын

Not half they have like five S2 products

@petethompson1282 2 жыл бұрын

same! You get what I call brain fraz, going round and round "is this the best combo?!?" Thats why I now use Farecla, simple, straight forward and up there with the best. Good thing is high cut MEANS it, finishing polish totakes the gloss really high. No silly names like "ultimate".. i mean ultimate polish isnt even a polish its a glaze!