Honda GN4 oil: amzn.to/3n5cfgb Changing the oil on a Dewalt 4000 psi pressure washer with a Honda motor.
Пікірлер: 94
@BryanHansen Жыл бұрын
I have since added an hour meter to help with maintenance: kzfaq.info/get/bejne/d516l81oyJewh6c.html
@stefanbuscaylet2 жыл бұрын
Hey thanks man for this video. The Dewalt manual was “see the engine manual” for how to change the oil. I downloaded the Honda manual, at least the ones i was finding, didn’t even discuss the dual cap, dual drain concept. I thought they were different chambers (like engine oil area different than transmission oil area). Glad you straightened that out. Thanks for the good work. LIked and subscribed.
@dakawk63072 жыл бұрын
Thanks for the video! I was confused as well about the duel cap, dual drain concept, and thought they were separate chambers. The oil change was very easy!
@damianfeyh3116 Жыл бұрын
Or okk😮 tgygtgg g gg Jo you my b in mug
@windowshaman Жыл бұрын
Great work Bryan! straight forward no nonsense instructions that I can use in real time.
@damianfeyh3116 Жыл бұрын
K m yeah
@aruntyagi4767 Жыл бұрын
Have now used this to clean house siding and it performed well kzfaq.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX I also bought some wand extensions which enabled higher washing without needing a ladder. I recommend both. This unit arrived quickly, was easy to assemble (only had to attach the handle), and arrived in perfect condition. The only very slight downgrade from a perfect score is the design has a low handle and requires pulling from the side. My old washer was an upright model, while this one is more horizontal. Other than that, it's perfect for my needs. It has a great deal of pressure and more easily cleaned the house siding, porch rails and concrete than did my older model. The engine is a bit louder, as well, but the total time to clean was reduced by the more powerful spray. Did I mention it starts on the first or second pull every time?!! I am definitely happy with this model.
@JettaTDI2005 Жыл бұрын
Very good video with step by step and thanks for letting me know that its time for my change on the same model.
@mitmiller8898Ай бұрын
Answered a lot of questions! Much better than the manual. Many thanks.
@Jatelieeeeeeerrrrrrrr Жыл бұрын
Great video. Appreciate the help!
@AlexMartinez-rz3kt2 жыл бұрын
Good video, really works for me, thank you very much.
@isaaclongoria2292 жыл бұрын
Super helpful!
@LeathermanSoftwash Жыл бұрын
I had a lot more glitter then that on my break in, on the motor and the pump and I mean GLITTER, every oil change after has been good though they recommend every 100 hours but since I run mine daily I change it every 50 and works wonders
@gthomasmelanson9060 Жыл бұрын
Thanks for that. Very helpfull
@paulsmith8212 Жыл бұрын
Thank You!
@phillipediniz66175 ай бұрын
Thank you
@juliusiannellathecarfella5517Ай бұрын
Good video
@universalizate7939 Жыл бұрын
Thanks you 🎉😊
@miguelvazquez30837 ай бұрын
The question how much oil exactly does the motor take. Cuz I read not to overfill and I believe if you feel it till it leaks from the other side it's over filled
@ricalcott8891 Жыл бұрын
I have the same unit. Changed the engine oil last fall and never had a problem and have used it since, again no problems Now all of a sudden it's slowly leaking engine oil from the drain plug which feels seated and not over tightened Any suggestions? Thank's
@alsimons7925 Жыл бұрын
👍🏽👏👏👏2 hours just to find outy it has 2 oil fill ports.geeez thank u sir🫡
@softmetals370210 ай бұрын
I guess after 9 years I should change the oil,😂
@wheezeirl23944 ай бұрын
It's been 2 for me and let's just say it's midnight black
@maxastudillo5195 Жыл бұрын
Hello how you put oil in to the pump
@melindakenagy3145Ай бұрын
Hey Bryan, thanks for this video!!! I picked up SAE 10w-30 Honda genuine oil from Home Depot will that work?
@BryanHansenАй бұрын
Yeah, that should work.
@kevinpaularg Жыл бұрын
Thanks for the video. I’m having a hard time loosing the oil plug. How did you loosen it?
@BryanHansen Жыл бұрын
The drain or fill plug?
@Antliftz Жыл бұрын
Hey Bryan, I’m having trouble with opening the oil pin and I’m also wondering what tools u used to open it with.
@BryanHansen Жыл бұрын
The drain plug or the fill plug
@kyleclark6405 Жыл бұрын
Hey Buddy why do you still have the shipping cap (red cap) on the AAA water pump…. That is only for shipping and is to be replaced with a vented cap that was shipped with the unit. Great video.
@BryanHansen Жыл бұрын
I don’t.
@robertscarpetti46562 жыл бұрын
Hi Bryan, Thank you very much for the great videos! Can I put Synthetic Oil instead of the regular. Will it effect the gaskets? Any perspective would be greatly appreciated. Thank you!
@BryanHansen2 жыл бұрын
In the pump or the motor? I wouldn’t change it regardless, but I wouldn’t use that oil going forward.
@robertscarpetti46562 жыл бұрын
@@BryanHansen Thanks Bryan for the quick response. I have an old DXPW3025. What would be for both please? I apologize for being a novice and I have not changed due to the lack of use. Manual states The pump was filled with oil at the factory. Change after the first 50 hours of operation and every 300 hours thereafter, or every 3 months. If using a , change oil every 150 hours thereafter. The I want to ensure I am changing the oils correctly. You have been a blessing with your videos and content. Thank you for any assistance or direction.
@robertscarpetti46562 жыл бұрын
Thanks Bryan!
@BryanHansen2 жыл бұрын
@@robertscarpetti4656 10w-30 for the motor and 15-40 for the pump. I’d just change both annually if it were me.
@robertscarpetti46562 жыл бұрын
@@BryanHansen Thank you again Bryan for your time and response.
@edwinaromerollc86 Жыл бұрын
Is it mandatory to “IMMEDIATELY” run the machine after changing either the Honda engine oil or AAA pump oil? Thanks.
@BryanHansen Жыл бұрын
Nope
@NZ_Lexus_IS-F11 ай бұрын
Wait what, does the Simpson pump come with oil? I didn't know, used for roughly 5 hours
@BryanHansen11 ай бұрын
It comes with oil.
@emilianomartinez86872 жыл бұрын
Hey man I recently bought the same model, I didn’t know you had to change that oil cap for the breathable one I run it for about 3 hours with it, would it cause any damage ?
@BryanHansen2 жыл бұрын
You should be fine.
@emilianomartinez86872 жыл бұрын
@@BryanHansen thanks man
@TUFFconductor2 жыл бұрын
How do you replace the pump oil? Unfortunately I can't find an owner's manual anywhere.
@BryanHansen2 жыл бұрын
I have that exact video posted up in my videos on my channel
@TUFFconductor2 жыл бұрын
Thank you very much!
@carlospedre80122 жыл бұрын
Hi. Do you have a video on the Dewalt 3300 Honda engine?
@BryanHansen2 жыл бұрын
No, sorry just this one
@ricalcott88912 жыл бұрын
Whats the recommended oil for the engine itself and what weight? Thank's
@BryanHansen2 жыл бұрын
30
@javiermarante53442 жыл бұрын
What’s the recommended oil change interval for both the pump and engine ?
@BryanHansen2 жыл бұрын
Engine was 24 hours and pump was 100 hours
@javiermarante53442 жыл бұрын
@@BryanHansen got it thank you! I am getting one of these pressure washers to start my own side business and see how it does
@chrisdelacruz1355 Жыл бұрын
After you break in the motor with the first quart of oil, how long does it last after the first oil change?
@BryanHansen Жыл бұрын
100 hours
@chrisdelacruz1355 Жыл бұрын
@@BryanHansen thanks! Just confirming thats with motor oil not pump oil correct?
@BryanHansen Жыл бұрын
@@chrisdelacruz1355 correct! You can use the sight glass on the back of the pump but I would do that at 100 hours as well. Oil is cheap.
@MrReyes-bq1xh2 жыл бұрын
Why didn’t you put on the breathable oil cap on? You still had on the original red cap.
@BryanHansen2 жыл бұрын
Mine actually didn’t come with it for whatever reason. I had drilled a pin hole in this one until they could send me another. I have the breathable one on there now.
@MrReyes-bq1xh2 жыл бұрын
@@BryanHansen ok last question…. My cap doesn’t screw in. And when I pull the cap the black peace comes off fairly easy. That normal?
@BryanHansen2 жыл бұрын
They are a little finicky. I had to line mine up for it to finally tighten down in there. It’s not forcefully, but there is an alignment portion
@stefanbuscaylet2 жыл бұрын
Wait. What? Whats the story with the breathable oil cap?
@MrReyes-bq1xh2 жыл бұрын
@@stefanbuscaylet What’s your question?
@marcellzin2 жыл бұрын
Hi, I have a dewalt 3400, and the water started to come out from the place where it suppose to suck the chemicals, do you know what it could be? Maybe clogged? Nice videos by the way
@BryanHansen2 жыл бұрын
There is a check ball valve that the soap line goes to, I would check that first and see if it is stuck open. From there is is a matter of troubleshooting leaks in the supply lines.
@danielrblend Жыл бұрын
I have the same unit and it leaks fuel after I use it - haven't figured out why yet
@BryanHansen Жыл бұрын
Has it always done it?
@danielrblend Жыл бұрын
@@BryanHansen Pretty much since I got it two years ago, it usually leaves a small puddle in my polyurea garage floor. It's definitely gasoline.
@BryanHansen Жыл бұрын
Weird. I would just look at the bolts around the carburetor to make sure that they are tied to start with. I would maybe run some seafoam through it to make sure that the float isn’t sticking as well.
@danielrblend Жыл бұрын
@@BryanHansen Thanks Bryan, I will check the carburetor out. I usually put Seafoam in all my small engine fuel, amazing stuff. I'll let you know if/when I figure it out.
@danielrblend Жыл бұрын
Still leaking, not from carburetor though. Fuel drip is from bottom of engine block, could be where the fuel tank and engine connect. Seems to only leak for a few hours after being run, then stops.
@iamwhodis Жыл бұрын
About how much does it take?
@BryanHansen Жыл бұрын
14 ounces if I remember correctly.
@iamwhodis Жыл бұрын
@@BryanHansen thnx!
@damiongardner2131 Жыл бұрын
What kind of oil did you use?
@BryanHansen Жыл бұрын
amzn.to/3n5cfgb
@WeeBeastie007 Жыл бұрын
Great washer horrible pump. 2 years and already shot. Replaced it with a comet pump. 4gpm now instead of 3.5
@milfjey3 ай бұрын
hey man my oil dipstick is stuck inside how do i take it out
@BryanHansen3 ай бұрын
The plastic yellow or black one?
@milfjey3 ай бұрын
@@BryanHansen it’s a dewalt 4400 psi it’s grey no too long of a dipstick
@milfjey3 ай бұрын
@@BryanHansen broke off the oil cap and went inside i just don’t know what to do
@milfjey3 ай бұрын
@@BryanHansen you there?
@BryanHansen3 ай бұрын
@@milfjey I would probably look at an ez-out to get it out.