Diagnose and replace clutch Yamaha 600 Diversion SECA /

Рет қаралды 7,484

Жыл бұрын

How do you know when your clutch needs replacing? How do you replace a clutch?. Can it be done without special tools? The answers to all these questions and more are in this video. This is a step by step video to make the clutch change easy. Remember to take your time and inspect everything that you see. There is no better feeling than completing a job, and realizing that doing it has made a big difference to your bike. The beauty of these bikes is that they are very reliable, and very easy to maintain. Any problems, feel free to contact me via the comments section. If I can help, I will.
Consider supporting me on Patreon if you enjoy the videos:
www.Patreon.com/RestorationBiker
Also there is a new poll every Monday on my community page so go check that out and see what you think, I will make a round up video of all results every quarter from the polls
See you next week - new videos every Monday from now on
Happy riding

Пікірлер: 28

@w09374 3 ай бұрын

Amazing video, solved my problem a treat. Ended up using the end of a 5.5mm drill bit ground down to fit both the basket and drive gear perfectly. No more clutch noise! Thanks RB! ♥

@RestorationBiker 3 ай бұрын

Brilliant, glad my video helped. That is the best thing I can hear from viewers. Enjoy your riding.

@matejtokoly5713 5 ай бұрын

Wow, what a video, fantastic job , one of the best explanation I have ever seen. I just bought one of these and I am going to restore it. Thanks again and keep making videos like this

@RestorationBiker 5 ай бұрын

Thank you so much for your kind comments. I am glad it helped you. I love doing videos like this, so it makes it really worth while when I get comments like yours. thank you.

@Gus-cg9yp Жыл бұрын

Hi, nice and tidy job !! Thanks , Gus

@RestorationBiker Жыл бұрын

Hi Thanks, the bike is a totally different bike to ride with a new clutch in it.

@johnc.fonseca8961 14 күн бұрын

Thanks for the vídeo.

@RestorationBiker 14 күн бұрын

Brilliant, glad you enjoyed it, thanks

@andrewharris7123 Жыл бұрын

Cracking vid, im about to strip down the clutch on a 92 600s i bought a few years ago but just left standing in garage, done a few jobs lately ready to take for mot but found engaging 1st, nuetral and 2nd gear difficult, ive tied back the lever and left for a few days but need to do the rattle pin anyway so will inspect clutch and change if necessary. This vid will be a huge help cheers

@RestorationBiker Жыл бұрын

Hi, Thanks for the comments. It sounds as if you have a couple of plates sticking together. A good strip down and clean of all the plates will probably get it working perfectly again.

@garry9999 Күн бұрын

Nothing like an old bit of mat for the workshop

@RestorationBiker Күн бұрын

Yes, indeed. It is now a 'minimum requirement' for me now

@arfurloin1 6 ай бұрын

Hi. Great video. Any idea if the FZS600 Fazer clutch rattle is the same problem?

@RestorationBiker 6 ай бұрын

Hi Chris, thanks for the nice comments. I love the Fazer. I very nearly bought a new one when they first come out. I have owned a couple of them since but they were secondhand. Great bikes. I love the gold paint scheme. The clutch is different on the Fazer. They do suffer from a clutch 'rattle' Normally this can be improved by doing a proper carb balance, as the clutch rattles if the carbs are out. If that doesn't cure it, then you need to dis-assemble the clutch and check the condition of the clutch basket and the clutch plates (the ears of the plates especially) Make sure that there are no 'burrs' on the basket where the plates contact the basket. If you strip it and want any other help, feel free to contact me and I will help if I can.

@danielhancock3499 Жыл бұрын

Good video pal just wondering what u used for the new pin

@RestorationBiker Жыл бұрын

Glad you enjoyed it. I had a length of steel bar the right diameter for the pin. The only problem was I forgot to film me doing it, so I had to 'skip' over it. The bike runs superbly now with no more noise from the clutch basket.

@Waffentrager_Auf_E100_ 10 ай бұрын

Hi i have same noise with pin What you use for made pin ??? Thanks a lot. Welding wire can be 3mm?

@RestorationBiker 10 ай бұрын

Hi, you can use anything for the replacement pin, it just has to be the right size. I have seen bolts cut and used, I used a roll pin. That allows you to knock it it and keeps it from rattling around

@booda2552 10 ай бұрын

I used a 3mm Alan key, cut and rounded it with a file then hammered it straight into the pin.

@RestorationBiker 10 ай бұрын

@@booda2552 Hi, thats great. so long as it gets rid of the rattle eh!

@EDP1 Жыл бұрын

remember to leave 3 MM free space on the clutsh lever on the handlebar .

@RestorationBiker Жыл бұрын

Hi, Yes you are dead right

@ynwrysky2785 Жыл бұрын

I put my whole clutch back together right, And now the cable doesn't fit right, And the clutch lever when I pull won't make the clutch engage and work

@RestorationBiker Жыл бұрын

Hi, yes, I know what you have done. On the top where the clutch cable fits onto the arm. You need to remove the small arm that is held by a circlip, and then re-position it in the correct position.