Diesel Fuel Filter Change with No Start Fix after Filter Change

Diesel Fuel Filter Change with No Start Fix after Filter Change - Bleeding Fuel Lines

Рет қаралды 49,197

Күн бұрын

Easy Instructions on How To Change a Fuel Filter on a Diesel Engine and Bleed Air from the Fuel System if it Won't Start After the Fuel Filter Change.
Fuel Filters need to be changed regularly on diesel engines to keep them running smooth and efficient and to prevent damage to your engine.
In this video you will learn how to change your diesel fuel filter and how to bleed the fuel system of air to get the engine running again.
This fuel system bleeding process will also work if you have let the diesel fuel run too low... causing a no start situation.
A clogged diesel fuel filter can cause the engine to surge and ultimately stop running.
I hope this video will help you maintain your diesel engine and keep it in tip top running condition.
*If this video was a help to you give it a "thumbs up". If you have not already done so, please consider subscribing to this channel.
Disclaimer:
Although I have been following these procedures for many years; I assume no liability for any damage that may occur to any person or property as a result of the information provided in this video. I take necessary precautions (that I am aware of) when working on these projects but that in no way implies or creates any expressed or implied warranty or guarantee of any kind of particular result. Any injury, damage or loss of any kind to anyone or their property or anything related to information in this video is the sole responsibility of the user and not Helping U Online (this video).

Пікірлер: 17

@lewishorton1426 Жыл бұрын

Very helpful. Good quality production ! Thanks !

@timstone869 3 ай бұрын

Worked great, I have a Shibaura 24 horse 3cylinder diesel, and I changed the fuel filter but it would not start after. I followed your instructions and bled the air out, still would not start, the Shibaura does not have the bleed screws like yours so I had to undo the injector lines and bled until the fuel appeared by turning the engine over. Reconnected the lines and it started after about 10 seconds of turning over. So no matter what the tractor your info is the answer. Thank you.

@helpinguonline 3 ай бұрын

Way to go!

@FranciscoGonzalez-ro7ht Жыл бұрын

thank you for this video

@helpinguonline Жыл бұрын

My pleasure... thanks for the visit

@gavincrispin1436 Жыл бұрын

new engine mounts too mate.

@robbyddurham1624 2 ай бұрын

thanks, My father in laws just quit running on me while going up hill. The fuel filter is nearly empty. I'll check it out tomorrow. see if fuel is draining into filter from tank and if so, try bleeding it. It tries to start and run real weak for a moment. A few seconds. You're video gave me a starting point.

@helpinguonline 2 ай бұрын

Good to keep the fuel level up in the Tank. When my tractor hits a quarter tank if I get on to steep but he’ll it’ll pull air and then I have to fill the tank and bleed the lines. You can do it!

@robbyddurham1624 2 ай бұрын

@@helpinguonline That's probably my case here. I'm ordered a fuel filter, so I'm putting off bleeding it until I put it on. I watched a guy crimp the return line to bleed it. It didn't work for me. I also to replace the lines. They're original. 1980's. The return line was pretty rotten at the connection to the fuel tank. Thanks again for the video. It takes time to share your troubles. Most of us don't take the time and just move on after finding out troubles.