Dino Alternator

Рет қаралды 849

Ай бұрын

Removing a Ferrari Dino Alternator with a US spec air pump. Why simple repairs get involved when working on a Ferrari.
#tomyangnet

Пікірлер: 24

@calebmcdonald8458 Ай бұрын

That air pump is crazy! I will never complain about access to things on my 308 again. It seems like the Dino takes it to a whole other level.

@tomyangnet Ай бұрын

It’s a little tight, but once you know what you’re up against, it’s not too bad! Thanks for watching.

@1BCamden Ай бұрын

What ever you do Tony, don't stop working on these things and making these episodes, so motivating, I thought my alternator was bad, but the fuel tank !!! better you than me. O-ring seals, so good and so bad, love the shield, but its all pretty tight in there. Looking forward to hearing how the AC comp performs, it's a whole different world in the warmer months. Best regards

@tomyangnet Ай бұрын

It’s Tom!…but the A/C seems to work well enough. It may not keep up at 90, but we’ll put that to the test soon! Thanks for watching.

@1BCamden Ай бұрын

Apologies, I got excited and didn’t check it before posting. That’s good about the AC comp, best regards

@clubdinousa8700 Ай бұрын

@@1BCamden Tony whateva youse do

@tomyangnet Ай бұрын

@@1BCamden no worries! Thanks for watching!

@wypilotifr Ай бұрын

Once again, a great video. From an engineering standpoint, this was a brilliant placement of the smog pump (due to the limited space). Still, that's some tight spacing and a massive Aluminum casting!

@tomyangnet Ай бұрын

I guess from modern standards tucking the air pump in there was not as bad as I've seen! Thanks for watching.

@clubdinousa8700 Ай бұрын

"Waffle Can Bracket" is the correct term, usually followed by colorful adjectives about bloody knuckles

@tomyangnet Ай бұрын

@@clubdinousa8700 I've been told it's possible to remove this bracket without pulling the tank, but I suspect it was a lie!

@marcusbonello3106 Ай бұрын

You da Man, Tom ;-)

@clubdinousa8700 Ай бұрын

Our hero saves another one! I personally know of 15+ Dinos that were taken out of service by oil soaked alternators and u r swift to get this one sorted now. I also added a hat for my heat shield too and a fast acting 60 amp circuit breaker. One tip: To prevent rattle from the hat to timing chain adjuster I slapped a piece of duct tape on the hat where it might make contact

@tomyangnet Ай бұрын

I'm surprised this one lasted so long considering hoe much oil has dripped on it through the years!

@barryphillips7098 Ай бұрын

In a lot cases like this the easiest option is simply to take the engine/gearbox out of the car replace ALL belts regardless much MUCH easier to do these jobs with the engine OUT!! Maybe copper pipes rather than steel for the coolant.

@tomyangnet Ай бұрын

The coolant pipes were not too bad to get out. I think there would be more risk of corrosion on copper pipes than the rubber hoses. The old ones fared pretty well considering their age. Thanks for watching!

@mikedx2706 Ай бұрын

If that were my Dino, I would convert the AC compressor to a modern Sanyo compressor and gain some Horsepower back. With regard to the alternator, I would strip out that nightmare alternator/smog air pump monster and replace it with a modern alternator from a Toyota which is smaller and puts out more amps for the Dino's electrical system..

@tomyangnet Ай бұрын

All good upgrades, but I like to try to keep things looking largely original. More output from an alternator may overtax the wiring and may require modifying the ammeter. Thanks for watching.

@beatglauser9444 Ай бұрын

You must be a bit of a masochist working on those beautiful , but absolutely terrible to work on Ferraris. I heard those kind of horror stories from British vehicles. But some Italian cars are obviously terrible to work on as well. Thanks for sharing that repair with us. Fourty years ago I thought that one day I would own a classic Maserati or Ferrari, but being realistic and not being a mechanic I will never buy one, even if I could afford one.

@tomyangnet Ай бұрын

As they say, it's a living! I think there are difficult repairs on all cars, and all makes and models have their struggles. Having owned several different cars of different makes, I can think of challenges offered by each of them. It's when you know the process that makes it a little more tolerable. Thanks for watching.