DIY 12V 160Wh Lithium Battery with Built-in 15W Wireless Charger and 39W Type-C PD3.0, QC4.0 Module

Рет қаралды 222,243

4 ай бұрын

#ErCanEverything #DIY #PowerBank
🔥In this video, I will make a 12V 14,000mAh 160Wh Power Bank with 39W PD3.0 and 15W Wireless Charger. It can also be used as a UPS battery.
• How to Convert 12v 7Ah...
• 10000mAh Portable Spot...
• FNIRSI FNB58 196W Prof...
• Make 20 000 mAh 74Wh P...
• GVDA GD188 3 in 1 12MH...
🔥You can find featured products here👇
📌12V 7Ah 18650 Battery Box with 40A BMS:
s.click.aliexpress.com/e/_EQl...
📌12V 15W Wireless Charger Module:
s.click.aliexpress.com/e/_Eyc...
📌LCD Display Battery Voltage Meter:
s.click.aliexpress.com/e/_EJO...
📌65W PD3.0 QC4.0 Charging Module:
s.click.aliexpress.com/e/_EJW...
📌2S/3S 15W USB Type-C Charger:
s.click.aliexpress.com/e/_EGJ...
📌10x15 ON-OFF-ON Rocker Switch:
s.click.aliexpress.com/e/_EyZ...
📌20AWG Soft Silicone Wire:
s.click.aliexpress.com/e/_Evh...
📌0.15 x 8mm Extra Nickel Strip:
s.click.aliexpress.com/e/_Evf...
📌10mm High temperature Insulation Tape:
s.click.aliexpress.com/e/_EzS...
📌Strong FiberGlass Tape:
s.click.aliexpress.com/e/_EuG...
📌Battery Insulation Gasket:
s.click.aliexpress.com/e/_Eyz...
📌Tungsten Carbide Drill Bits:
s.click.aliexpress.com/e/_EyQ...
📌Spot Welder minderRC DH30 Max V2:
s.click.aliexpress.com/e/_Evj...
📌GVDA GD300 Soldering Iron:
s.click.aliexpress.com/e/_Ezm...
📌AMTECH Soldering Paste:
s.click.aliexpress.com/e/_Ew7...
📌Fnirsi FNB58 USB Tester:
s.click.aliexpress.com/e/_Dcg...
📌GVDA GD188 Oscilloscope Multimeter:
s.click.aliexpress.com/e/_Euw...

Пікірлер: 76

@FixitEasyDIY 4 ай бұрын

You made it even better, than your previous battery project. Greetings ❤

@ErCanEverything 4 ай бұрын

Thank you my Friend 🙂🤝🤝🤝 I have been looking for this wireless charging module for a long time and finally found it😊

@robfel68 4 ай бұрын

Thanks for sharing your creativity ErCan. Your truly an inspiration for many of us. Keep'em comming 👌

@ErCanEverything 4 ай бұрын

Thank you for the kind words my Friend🙂🤝🤝🤝

@bobelism 3 ай бұрын

i loved it so much. it relaxed me

@droid1177 4 ай бұрын

Dear Sir, Amazing work. I understand almost everything, except how you managed to get super fast charging with just 12volt and the 65watt pd module. It was my understanding that pd wasn't enough it had to be a pps charger.

@farzaibsheikh9764 4 ай бұрын

so clean like always 😍

@ErCanEverything 3 ай бұрын

Thank you my Friend🙂🤝🤝🤝

@brianwood5220 4 ай бұрын

An excellent project, thanks for sharing.😃

@ErCanEverything 4 ай бұрын

I'm glad you liked it my Friend😊🤝🤝🤝

@saimon1409 4 ай бұрын

Pěkná práce, jako vždy 🙂

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝

@michaelmike12 2 ай бұрын

Thanks! I ordered the parts. Question please: can the usbc charger balance 3s. On the description of the item it sais it can with minor change. You did not connect any wire after the short, right?

@legotechniccreationsbygisu7487 4 ай бұрын

Greetings from Germany big fan 👍

@ErCanEverything 4 ай бұрын

Thank you my Friend🙏🙂🤝 Greetings from Bulgaria 👋 👋👋

@miteshdhanani 3 ай бұрын

As u have made it, I would like to ask you that, if we want to make it for 6v 3W

@sonybravia1416 11 күн бұрын

!!! Is it possible to use this assembly not in a UPS, but with an inverter, if necessary?

@thawzinkhant1759 4 ай бұрын

Nice video 👍

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝🤝🤝

@markmartinez9031 4 ай бұрын

Awesome video as always. Can u name that charging module that u use to charge the battery? Does itvalso work for LifePO4 battery?

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝 I think it's only for liIon batteries and you can find featured products in the video description.

@littlearmysquad726 4 ай бұрын

Cool video

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝

@app213 4 ай бұрын

Nice work 👍🏼. A question: in the event The PD 65W charger module is connected to a laptop for example which then draws 65W. Wouldn't the wireless charging module get burnt/blown up because of the higher current and voltage draw by the PD module?

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝 Nothing will happen to it because the current does not pass through the wireless charging module. The two modules work separately, that is, the load remains on the cable and not on the wireless module.

@DjaniAgain 4 ай бұрын

The two modules are connected in parallel. So whichever output you choose only its module will be loaded. If you use 65W and Wireless charger at the same time, they will draw as much as current they need to work from battery pack. They won't interfere as long as there is enogh juice in the battery pack.

@DjaniAgain 4 ай бұрын

Professional work Brother! Do you consideeing mass production and selling those? ✌️

@ErCanEverything 4 ай бұрын

Thank you Brother😊🤝🤝🤝

@Kajalstudiobyona2667 3 ай бұрын

Camera LED lights battery body kaha milega

@fatsalda 2 ай бұрын

Good morning. What is the liquid you are spraying? and what is it for?

@ErCanEverything 2 ай бұрын

It's a two component adhesive with a spray hardener

@MrBae32 3 ай бұрын

Where can I get the batteries ?

@zuchamotungoe6817 4 ай бұрын

Bro, Excellent 👍 Will be good if you add subtitle for the modules name, cell 18650 etc.. here just learning now New subscriber ...

@ErCanEverything 4 ай бұрын

Thank you my Friend🙂🤝 Everything I used is in the video description. I got the cells from cheap Kaufland screwdriver batteries My-Project😁

@zuchamotungoe6817 4 ай бұрын

Bro, i order from AliExpress years back but now the website is banned in our country.. Btw bro, you are from which country Here I'm from India

@ErCanEverything 4 ай бұрын

@@zuchamotungoe6817 I'm from Bulgaria😊

@zuchamotungoe6817 4 ай бұрын

Okay from Europe border with Turkey and Greece Watching your video 3 times continuously...

@hamzamalik221 4 ай бұрын

10:35 what you spray here

@ErCanEverything 4 ай бұрын

Because I use a two-component glue, the spray serves to harden it quickly😊

@cuongpt5556 4 ай бұрын

@@ErCanEverything what's it name bro?

@Kuiqdeal 3 ай бұрын

i need this price plx

@hamzamalik221 4 ай бұрын

What is the name of that green tape you use

@DizzyTheEvil 4 ай бұрын

18650 Green Barley Paper Insulation

@ErCanEverything 4 ай бұрын

I have added everything I use in the description. And this green is called Battery insulation gasket

@hamzamalik221 4 ай бұрын

@@ErCanEverything Your videos turns into ASMR such a satisfying Diy projects 😍 I love watching them keep it up

@mehmetaktaslar 4 ай бұрын

👏👏👍🏻

@ukachiazubuike7419 4 ай бұрын

nice ..but the battery charging indicator is not visible

@ErCanEverything 4 ай бұрын

😁

@user-uy3mn1hf2v 4 ай бұрын

ভাই আমার এক পিচ। বেটারি টেষ্ট মিটার লাগবে। দেওয়া যাবে

@technicalandinformativevid7128 4 ай бұрын

Parts links which are you using

@ErCanEverything 4 ай бұрын

Everything I used is in the video description.

@BigKokka 4 ай бұрын

No magic word?

@technicalandinformativevid7128 4 ай бұрын

@@ErCanEverything but this app banned in India . So share another link or site to place order

@blackbird9813 4 ай бұрын

@@technicalandinformativevid7128 AliExpress banned in India?

@nursaitaksu-yt1nr 4 ай бұрын

👍👍👍👍👍👍

@ErCanEverything 4 ай бұрын

👋👋👋🙂🤝

@fluffy4008 3 ай бұрын

Parts list

@GauravKumar-zk8vc 4 ай бұрын

Component purchasing links please send me please

@ErCanEverything 3 ай бұрын

Everything is written in the description🙂

@electroniquepassion 4 ай бұрын

👍👋👋

@ErCanEverything 4 ай бұрын

👋👋👋🙂

@azizulhossain5737 3 ай бұрын

Amar one pice battery nit if you provid me

@user-bc3qi7zg2u 11 күн бұрын

no knowings, result: such a silly thing

@TechnoMasterKyiv 4 ай бұрын

В підтримку каналу! Підписався. Слава Україні! 🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦

@ErCanEverything 4 ай бұрын

Thank you my Friend🙏🙂🤝🤝🤝

@user-yy3rc6ij7l 4 ай бұрын

Rr😢

@ErCanEverything 4 ай бұрын

@user-oh6qz4yr5x 3 ай бұрын

Он у меня все спиздил

@ErCanEverything 3 ай бұрын

From your empty channel?😏🤥

@DIYuntilDAWN 4 ай бұрын

Nice idea but HORRIBLE DESIGN. Better hope no one with the latest iPhone or Galaxy phone sets one on top of this and shorts ot the battery terminals with the metal edge of the phone. Best case you are just going to short the battery and get a scorch mark on your phone. Worst case you either spot weld your phone to the battery, or short out your phone on this peice of junk.

@soulbrothers7789 4 ай бұрын

Be quiet because you are so d..mb

@ErCanEverything 4 ай бұрын

I thought about it, and nowadays almost nobody uses a phone without a case😉

@AminMiah-dm2on 3 ай бұрын

@denim47gaming 3 ай бұрын

@ErCanEverything yes, but still, use atleast a switch for the improved design.