DIY 2000w Electric Bike

Рет қаралды 903,217

Күн бұрын

I'm back with the new E-Bike DIY project...
This bike can go 60km/h, 60km range, peak 2000w because of 14s battery pack!
Thanks for waiting!
Battery: Custom Li-ion 21700 Battery pack 14s5p config (52v 25Ah), maximum 40A discharge (depend on BMS). Removable and has a voltage monitor.
Controller: KT motor controller - 17A rate, 35A max (2000w peak) with LCD8s
Motor: 1500w fatbike hub motor
------------------------------------------------------------
Table of content:
0:00 Making Removable Ebike battery pack
12:46 Making Battery pack outer frame
15:20 Start assembly
25:06 Done & Test
27:26 Final result
------------------------------------------------------------
Aff links:
Ebike kit: s.click.aliexpress.com/e/_Dlx...
Capacitor Spot Welder 0.3mm Portable s.click.aliexpress.com/e/_ooI...
3D printer: s.click.aliexpress.com/e/_oBj...
------------------------------------------------------------
MUSIC:
Hotham - The One • Hotham - The One [ NO...

Пікірлер: 360

@goodiy9592 3 жыл бұрын

Please turn on the subtitle (Vietnamese & English available)

@Scotty__ 2 жыл бұрын

What good is the subtitle if you're not even talking????

@Scotty__ 2 жыл бұрын

Ok nvm it's working

@curtisjohnson7023 2 жыл бұрын

Do you have a battery building service?

@yannieeats6528 2 жыл бұрын

@@Scotty__ rtto y

@evolveelectricvehicles8551 2 жыл бұрын

I have made a fast electric motorcycle inspired by this video, video on my channel #electricmotorcycle

@Delali Жыл бұрын

This is by far the best e-build I've ever seen on KZfaq. As a fellow youtuber, I really appreciate how much work you put into this video.

@christhamilton42 2 жыл бұрын

Great video and project. Here's a tip for you though when you cut aluminium with a friction disc, if you take an ordinary candle of any shape or flavor and wax the disc by holding the candle against each side and the edge of the disc while it is spinning. It will make the blade cut much quicker and cleaner and make the blade last much longer. You have to reapply it as needed.

@kittukittu3665 Жыл бұрын

All itums in A class, 👍 With hub motor

@adrianpolley9419 2 жыл бұрын

I'm never going to build one, but just had to watch this all the way ! Nice !

@subho3129 2 жыл бұрын

Exactly 😅

@absolutezero6423 2 жыл бұрын

I would use zip ties for the loose wiring and street tires instead of those off-road ones. I wish I had your skills and patience. Awesome work.

@vincentpernicano3277 2 жыл бұрын

Nice build...but I think soldering near those cells is risky, you could use a sheet of nickel so that you can spot weld directly to the cells and then solder further away to prevent excess heat from damaging the cells. Otherwise looks very well done.

@TheOddybody 2 жыл бұрын

Nice bike dude, hope you had some nice rides this summer. Keep doing DIY stuff, its a talent you got for sure.

@cherrymaddox8226 2 жыл бұрын

chúc đại gia đình hạnh phúc và thành công hơn nữa nhé. Thấy gia đình thầy Lộc trọn vẹn như vầy là quá vui

@richierich2154 2 жыл бұрын

the 3d printed box is so cool to just make your own at your own size very nice and also I have a folding bike I put it in the shopping cart when i go to a store I live in NY and there's no way it would still be there when I got back outside

@ramzy1013 2 жыл бұрын

You possess great skills my friend. Thanks for sharing and happy ebiking...

@Shlovanzleeat 2 жыл бұрын

Nice build, the bike looks terrific, very nicely modular build.

@Vad36 2 жыл бұрын

Спорный проект, но за работу 5 баллов однозначно.

@robertburgess968 Жыл бұрын

Fantastic battery build n design. Thanks

@aku7598 2 жыл бұрын

You have all the tools plus electrical knowledge, wish I own those tools too.

@kenbad8271 2 жыл бұрын

You're one very smart technical young man to be able to do what you did and your ebike looks awesome however batteries today cost less than if you make them yourself so I would not get into making my own. Also most people don't have the machinery or tools or the technical knowledge to do what you did so it's better for most people to just buy a battery. I think anybody who buys a kit and buys a battery can get away with making a beautiful ebike for a very minimal price and have it look just as good as yours.

@kenbad8271 2 жыл бұрын

I forgot to mention that batteries today are very powerful you can get batteries and motor kits that can make a bike go just as fast as yours

@kkuhn 2 жыл бұрын

@@kenbad8271 You can always get more power and performance out of a battery that you custom design for your bike. Cost is much less if you buy recovered cells

@Delali Жыл бұрын

The battery pack alone is a thing of beauty.

@geriwrn Жыл бұрын

Your 3-D Prints are Great !

@josefont11 Жыл бұрын

Excellent job! Congratulations.

@wastedWizard509 2 жыл бұрын

Wow I love it! great build🤩👍

@hejasverigeee 3 жыл бұрын

Greetings from Stockholm Sweden Europe ❤️

@hajimes2000jp 2 жыл бұрын

If I had money, I would invest in this guy. It will be possible to please many people in the world.

@wisdomkordie7832 Жыл бұрын

🥰Wow, I really love this electric bike😍. I wish to have one.#Biggest Fan From Ghana🇬🇭

@Popeyes66 3 жыл бұрын

Good work Lam

@goingoutotheparty1 2 жыл бұрын

Good effort man, great battery pack

@anish40a 2 жыл бұрын

Underrated youtuber tech

@gregbullington891 Жыл бұрын

Very impressive build. Love the video

@noabert 9 ай бұрын

Great Value Ebike - Canadian Review

@akudu3nz 2 жыл бұрын

nice one sir..thanks for sharing.

@citrixrockmetalcovers 2 жыл бұрын

So amazing and fascinating to watch, thank you

@JohnJohnson-bh4di 2 жыл бұрын

This may be DIY but you look like a master builder to me.

@markwilson6878 2 жыл бұрын

Nice build🎉

@dannydmv5341 2 жыл бұрын

Chao em, rat hay va rat professional

@galacticfederation9064 2 жыл бұрын

Really nice job mate :)

@edloy8629 2 жыл бұрын

THAT WAS AWESOME EBIKE 😭😭💯💕

@theblitz1687 2 жыл бұрын

What would be the range with pedal assist? I'm curious would it see 100km? Whats the total weight of the bike before and after modding?

@claudineifbueno 2 жыл бұрын

Parabéns excelente trabalho 👏👏👏

@meolired 2 жыл бұрын

very nice gift to elderly

@pianojacq 2 жыл бұрын

Please use insulator paper on the top of your cells (the +), you are asking for a melt-through or wear through on those strips and you are not going to like it when that happens, this is a pretty dangerous pack. And please round off the edges of your strips rather than to leave the very sharp points sticking out (also a reason why many packs fail, vibration of the loose ends allows them to wear through the heatshrink of the batteries). Wire bonding the copper wires to the steel would be a better way to attach them, otherwise weld a strip to the pack and solder to that (or first solder to the strip and then weld the strip onto the pack). That way you inject a lot less heat into the cells, especially a problem with the - of the cells. Finally, you should lay out your wires so that they do not cross, yet another reason packs catch fire is balancer/sense wire shorts. What kind of welder do you use?

@devtank 2 жыл бұрын

Nice method you have there.

@user-spv96x3x7i.4kc 2 жыл бұрын

very nice, great skills, congrats

@hubmotormadeintaiwan188 2 жыл бұрын

Great video !

@georgecolon2786 2 жыл бұрын

Awesome Bike, Looks a little like mine. Yours is a bit more powerful than mine but my bike is very powerful as well , I called "TANK"

@ChaseNoStraighter 2 жыл бұрын

Well done!

@amercalifa5592 Жыл бұрын

Super, excellent master!!!

@vasiliymoraru851 2 жыл бұрын

Excelent! Bravo!

@151065omar 2 жыл бұрын

las gracias a Ud. por compartirla.

@bricomecanique5724 Жыл бұрын

nice work!!!

@jackreacher1963 2 жыл бұрын

You look like you have done this a few times nice work. 👍

@anilwaghmare2255 3 жыл бұрын

Well done👍

@goodiy9592 3 жыл бұрын

Thank you 👍

@mbpro08 2 жыл бұрын

cool 3d printed battery cass

@user-um1gs4ht4o 2 жыл бұрын

دراجة مجنون صح رووووووعة اكشن مدهش من خردة فقط اعجبتني جدا من جزاءر

@bonsaisafari1235 2 жыл бұрын

Brilliant creativity Bro

@MultiExtractor 2 жыл бұрын

Big Job !!! Nice dude +1

@antoniocolon1972 2 жыл бұрын

LO ABSMIRO MUCHO TIENE MUCHA INTELIGENCIA DIOS LO SIGA BENDICIENDO 🙏 TODO ESTE TIEMPO AMÉN.DESDE PUERTO RICO Y NEW YORK.

@eagleeatsmonkey3621 2 жыл бұрын

very good looking bike

@rahulpathania78 2 жыл бұрын

Awesome !!

@pedrocarvalho5824 2 жыл бұрын

Real nice project. I've a similar project on the way, I'll be making a 3000w 20'' fat bike, let's see if I can make it just as nice as yours. Will be a 72V 18 or 21AH battery, for the 3000w hub motor. You can reach 60km/h with 52V, that'a great, the hub motor page says 73km/h with the 72v, is much more than I need. Was inspiring to see you video.

@goodiy9592 2 жыл бұрын

really excited, 3000w sure more torque and more fun

@katiekumcgil 2 жыл бұрын

Heya ,with the 72 volt 21ah youll make the power ,but the math says this guys 2000 watt wont make on that motor and pack.that 72 volt level makes all the difference ,they get scarey fast

@goodiy9592 2 жыл бұрын

@@katiekumcgil watt depends on max amp draw of my controllers, max 35Ax58.8V = 2058W when full battery. sure 72v will have different torque

@flexo3333 2 жыл бұрын

@@goodiy9592 Due to vdrop you should use nominal voltage imo? 35*52=1820. And I'd say a "2kw bike" should be able to run constant 2kw, not peak...? Nice build tho.

@pedrocarvalho5824 2 жыл бұрын

@@goodiy9592 more volts equals more speed, more amps equals more torque.

@oxicoffee4352 2 жыл бұрын

Cứ nghĩ clip của nước ngoài, rất tuyệt.

@TechnodudeEV 2 жыл бұрын

Nice job,

@jynkotech 2 жыл бұрын

She is so amazing

2 жыл бұрын

hello brazil, it's great congratulations for the channel

@titinegruta9532 Жыл бұрын

Super...super video...

@Daur251282 Жыл бұрын

57 km/h - it's ok, but no wow. Distance 27 km - it's very very bad with this VERY BIG accumulator 🤦‍♂️ I thought minimum 70 km/h and distance 90-100 km. But you very genius man, we wait new model, with better parameters 👍👍👍👍👍👏👏👏👏👏🔥🔥🔥🔥🔥💥💥💥💥💥 Love you content 🔥🔥🔥🔥🔥

@AChi__ 3 жыл бұрын

👍🏽 i like it

@alltypeclips8528 2 жыл бұрын

very interesting i like it..

@peterwaldburger8202 2 жыл бұрын

Good job and made in Danang 😉👍

@k9dummy 2 жыл бұрын

Good one

@ActivityPhoto 2 жыл бұрын

Great CAD and 3D printing design. Nice finished product. But I wonder why he choose direct drive motor and 17 amp controller. Wonder what the total aH capacity of the battery pack was.

@haitung336 2 жыл бұрын

Này làm pin nằm ngang khung sườn xe như 1 bình xăng nhỏ gọn nữa là đẹp.

@lovepreetsinghgill517 2 жыл бұрын

If I can do this in my life, I will be blessed.

@venicebeach9777 2 жыл бұрын

God job from turkey🇹🇷

@haribasnet5146 2 жыл бұрын

ATTI SUNDAR

@geraopex 2 жыл бұрын

китайцы как обычно творят чудеса!)

@Maxttor Жыл бұрын

Awesome! Pls what is the final weight of you and the bike and what was the final speed reached?

@warlockboyburns 2 жыл бұрын

perfect video

@mustainchannel5484 2 жыл бұрын

very smart 👍

@MrBichBinh 2 жыл бұрын

Cái đồng hồ điện đẹp quá vậy anh.

@AndreMaxP51 2 жыл бұрын

Really nice build. Is it possible to have the STL file for printing the battery case? Mnay thanks in advance.

@rogersocalbeaches5734 Жыл бұрын

nice batttery

@edrissakhayee5265 2 жыл бұрын

will done mate

@deadboy7337 2 жыл бұрын

How much is total cost? Including the spot welder?

@Jitshri 2 жыл бұрын

Awesome work. Can you make one for me. How much cost and where you stay?

@tungngothanh4756 2 жыл бұрын

khá ok đấy chàng trai

@angeljimenez9807 2 жыл бұрын

DESDE ARGENTINA FELICITACIONES SALUDOS

@devtank 2 жыл бұрын

Nice re-fabrication of that pedal sensor. I did something similar but not as cool!

@dmitrysolncev39 2 жыл бұрын

отличная работа

@tyronejackson1404 Жыл бұрын

Amazing work. I'm custom building my bike with same foldable bike frame and a 1500W rear tire kit. With your battery kit setup you are no longer able to fold your bike correct?

@xedienthaiphong 2 жыл бұрын

Lik 5 sao cho người việt mình. Xe chế đẹp lắm PRO, rảnh share cho anh em xin cái file in 3D nhé. Thanks ad nhiều, chúc ad nhiều sức khỏe.

@MrVictsan112 2 жыл бұрын

would the controler 17a to 35a work on a 48v 20a battery? and go past 30mph

@thecure272 2 жыл бұрын

Echter Könner Top !!!

@goodjob05 2 жыл бұрын

와~~~~~ 꼼꼼함이....ㄷㄷㄷ 배터리고정 판을 만드는것도 놀라운데.....케이스까지 대단하시네요 알루미늄 판에 금속 케이스 까지.....와~~~~~~ 잘봤습니다

@suparnathemotorider537 Жыл бұрын

pagal

@gopisridhar3764 2 жыл бұрын

Does all these available in Amazon

@samsulsmustari8969 2 жыл бұрын

Nice bike, i hope you make tricycle electric

@JASantiago5 11 ай бұрын

Genius!

@kjm-ch7jc Жыл бұрын

Would be nice to see you ride it as an ordinary bicycle seeing as its fitted with pedal and gears.

@htd208 2 жыл бұрын

Anh ơi nếu đóng cục 72v 30ah thì cần bao nhiêu viên 21700 5000mah ạ bao nhiêu p

@occamsrazor7939 2 жыл бұрын

What is that spot weld device you are using??

@va5715 2 жыл бұрын

Should have used insulation paper rings that stick on the positive side of the cells. Also you overheat the cells a lot when you soldered on more wire to it and when soldering on negative and positive terminals, better think of solution where you don't overheat the lithium cells. Also balancing wires should not intersect with each other, if they do must be insulated by paper or cardboard. Overall this is a bit fire dangerous.