We Built a Street-Legal Electric Motorcycle for $4,000 (PARTS LIST)
Рет қаралды 1,403,615
2 жыл бұрын• PART LIST •
- BMS: www.aliexpress.com/item/33019...
- Batteries: www.aliexpress.com/item/40004...
- Batteries 2: www.aliexpress.com/item/40009...
- Charger: www.aliexpress.com/item/32855...
- Motor: www.thunderstruck-ev.com/me15...
- Contactor: kellycontroller.com/shop/sw200/
- Controller: kellycontroller.com/shop/kls-...
- Sprocket: sprocketspecialists.com/
- Heat Shrink: www.aliexpress.com/item/40004...
- 6 AWG Wire: amzn.to/2WXk6SM
- DC-DC Converter: amzn.to/3xjZwZn
- Battery Connectors:amzn.to/3rU4B9o
- Temp Gauge: amzn.to/2Vx35hk
- 16 AWG Wire: amzn.to/2WQpmaB
- Wire Connectors: amzn.to/3ikrzDz
- Copper Ring Terminal: amzn.to/3iohVjl
- Copper Ring Terminal 2:amzn.to/3Ad73uC
- DC Shunt: amzn.to/3lsLbrb
- 2 AWG Wire: amzn.to/3xA5upb
- Battery Quick-Connect: amzn.to/3AfXfjN
- Clamp Volt Meter: amzn.to/3iotA1x
- 6 AWG Terminals: amzn.to/37pTICM
- Relays: amzn.to/3xsFEmG
- 2-Wire Ignition Switch: amzn.to/3fwHGfq
- Smart display: a.aliexpress.com/_mKDkDoF
- DC Voltage Current Meter: a.aliexpress.com/_mteg1kT
- T2 copper row copper strip grounding busbar: a.aliexpress.com/_mMV5trh
- Farad Capacitor 2.7V: a.aliexpress.com/_m0b56bV
- Farad Capacitor Balance Board: a.aliexpress.com/_mPIL2TV
- Headlights: www.ebay.com/itm/262735193155
- Tail Lights: amzn.to/3Ad8Lw2
- Bar-end Mirrors: amzn.to/3A8gU4Y
- Seat Cover Vinyl: amzn.to/3CgKHdv
- Fork Ears: amzn.to/3xsjPnn
- Grips: amzn.to/3rSrPNc
The Electric CB750 Cafe Racer motorcycle project is finally getting wrapped up! This electric build project has been an incredible journey and it turned out so well. This is a timelapse of the build from start to finish with the parts list above.
@TOAD7464 2 жыл бұрын
The fact you made an electric cafe racer isn't the wild part. You made a cafe racer with 200 mile range. That's insane
@LawrenceRhodes 2 жыл бұрын
Looking forward to a ride and capacity check. Easy to do and will confirm estimated range.
@caseyb1346 2 жыл бұрын
@AcoolCat that's easy, pretty much every commercially available e-bike/e-motorcycle is a scam. The manufacturers know that most people have no clue how cheap electric parts are, and how easy they are to work with.
@naz95k71 2 жыл бұрын
Its not that hard.... I made a 80mile range battery for literal pennies.
@a_hope_in_hell 2 жыл бұрын
that's about what a stock CB750 that the donor bike of this was can do. also got a CB 750 cafe racer and 200 miles is about as far as I can get with a full tank!
@TA-cp7oz 2 жыл бұрын
@@caseyb1346 posted an offer for them to manufacture
@ashworthcustoms 2 жыл бұрын
Definitely switch over to belt drive it’s quieter with less drag. Sick build guys.
@redford6110 2 жыл бұрын
itll slip
@eduardosampoia5480 2 жыл бұрын
@@redford6110 not if it's toothed
@redford6110 2 жыл бұрын
@@eduardosampoia5480 aaah they still slip
@hardergamer 2 жыл бұрын
@@redford6110 No they do not slip, look up bikes like Zero, BMW, also what do you think a Cambelt is on most cars trucks? If they slipped just 1 tooth they will bend valves etc. Harley Davidson's use belt drives, just look at the HD livewire.
@Falcodrin 2 жыл бұрын
@@hardergamer gotta love interference engines...
@echoMagnolia 2 жыл бұрын
I work at a company that makes lithium batteries for space applications, and I am really impressed by your battery design! Awesome work guys, seriously.
@line6spider10 2 жыл бұрын
I hope I get a comment like this when I post my video
@sonicsupersam7793 Жыл бұрын
@@line6spider10 what are you building?
@kevins1552 Жыл бұрын
seriously? Shouldn't they have spot welded that?
@echoMagnolia Жыл бұрын
@@kevins1552 yes, the typical approach is to spot weld but that doesn't mean soldering won't work. Once you get the spot weld procedure dialed in you get consistent electrical connections that are more tolerant to shock and vibration, and reduce the risk of overheating the cell during the solder operation. Still, awesome work guys.
@taiwoolaleye6333 10 ай бұрын
cooling though
@mastercheif1989 2 жыл бұрын
This is how entrepreneurs and companies start, they become Harley Davidson, Zero Motorcycles, and the like. Way to go guys. You should definitely consider branding it, licensing it, and working towards getting your own thing going.
@Darkness-ie2yl 2 жыл бұрын
not without the blessing of the masters. and of course tribute
@MyKharli 2 жыл бұрын
What ! become overpriced, overhyped, terrible for self fixing beancounter company ? , i hope not !
@MazdaRX7007 2 жыл бұрын
@Darkness Ah yes, the government and good ol taxes
@Darkness-ie2yl 2 жыл бұрын
@@MazdaRX7007 them too
@13thvarebel16 2 жыл бұрын
@@MyKharli Unfortunately, that's the ultimate fate of every successful business that outlives its founders.
@techguy3424 2 жыл бұрын
Swapping to a belt drive would make it quieter and it looks like there's room under the seat for a few more batteries down the road if you want them. Cool project.
@codiclimenhaga7234 2 жыл бұрын
belt would or old school direct shaft
@0xsergy 2 жыл бұрын
@@codiclimenhaga7234 driveshafts have a ton of friction losses due to 2 90deg power transfers. belts i think have less drag than chains tho.
@mihaisamaila7646 2 жыл бұрын
@@codiclimenhaga7234 Shafts add weight, apart from adding complexity.
@callefalk4457 2 жыл бұрын
WTF???
@eksine 2 жыл бұрын
belts sound like they could break, I would not want to get stranded. a chain is strong. or at least carry an extra belt and other parts
@MrPPunch69 2 жыл бұрын
Sadly a build like this would be far beyond "streetlegal" in my country. Great work guys, jealous regards.
@TheInja 2 жыл бұрын
Haha dang
@MrPPunch69 2 жыл бұрын
@@wolfgar_m9389 Noch schlimmer, Österreicher 🤪
@xeno3029 2 жыл бұрын
If I may ask how would it not be street legal, is it just the fact that its self made?
@Matt281296 2 жыл бұрын
@@xeno3029 anything self built is illegal in Europe basically. Making it road legal would require you to be a professional maker and usually an industrialist.
@pascal8691 2 жыл бұрын
They have to wait for the plate, as they mentioned at the end of the video (min 29:00). It's not street legal jet. I don't know, what the requirements are, to get it street legal, but in my country (Switzerland) would that be allmost impossible to achive :-)
@martinreynolds9193 2 жыл бұрын
Please please please consider taking this on tour across the country. There are literally thousands of US that wish to see it up close for ourselves and most importantly, just to shake your hands. Awesome awesome job guys!
@roychungy 2 жыл бұрын
Practically never comment on KZfaq videos but this has to be the coolest project bike that I've ever seen. Will be trying something similar in the future thanks to you guys! Amazing job.
@anesthetized7053 2 жыл бұрын
i love how simple these bikes are, yes there are complicated measurments and making a battery pack is tedious but the part count is so low that replacing / fixing things must be so convinent compared to diagnosing a gasoline engine and taking things apart. Although i guess repairing the damaged parts on electric bikes is not as easy in certain situations, a dead motor often is not repairable and you have to just buy a new one.
@KillinReapers Жыл бұрын
Not wrong, but people already familiar with mechanical things that don't know electric, have an easier time with gas stuff
@CaptainOverLoad Жыл бұрын
You can rewind a motor stator but people thing it’s rocket science. Sadly most of man has not mastered electrical and the harnessing of it. It’s all about precision, just as puting a block back together and adjusting valve gaps are. It can be done easy and cheap but people will not educate themselves further than the engine. Motors are useful outside of electric cars.
@chuck1011212 2 жыл бұрын
Big props. You guys work great together, and even with the project's challenges and personal challenges you noted along the way, you stuck to it and put out a great product. Great series!
@anordman9659 2 жыл бұрын
Guys, this is soo inspiring. I am totally impressed with the range. I am not a café racer biker but this inspired me to start with an electric custom build. Thx for all the vids.
@petermiles55 2 жыл бұрын
Thanks guys for the video. This was definitely a labour of love and such a creative endeavour.
@W4rH4wkXX 2 жыл бұрын
"It's not a Dad bod, it's a father figure" LMFAO! 😂 Gents, excellent job! this bike looks so bad @$$!
@trevorsmith1174 2 жыл бұрын
Need that shirt! Lol
@MatthewN8OHU 2 жыл бұрын
@@trevorsmith1174 Me too, though it will end up being a birthday present for my setpfather.
@InsideOfMyOwnMind 2 жыл бұрын
@@MatthewN8OHU I can think of about 1e6 people who would like it.
@jamesclay4012 2 жыл бұрын
It's gorgeous! I've followed this project from the beginning. I'm very very impressed with the work you guys have done. Can't wait for your next project. I'm motivated to build my dream.
@TheInja 2 жыл бұрын
Do it dude 🙌🏽🙌🏽🙌🏽 thanks for following along all this time!
@thuggooch1776 2 жыл бұрын
The ingenuity and dedication that went into this is remarkable! What a bike!
@alrestauro 2 жыл бұрын
What an amazing process! I enjoyed every second and minute of it! Well done, guys! IT'S SO COOL LOOKING THE FUTURE IS SO BRIGHT WITH YOUR INSPIRATION!
@JMMinistries 2 жыл бұрын
Super Happy, Excited & Proud Of You Guys! THE ELECTRIC CAFE RACER LOOKS FREAKING AWESOME! 🔥🙌🏾👌😱
@CherokeeAquatics 2 жыл бұрын
Omg just to see it at this point is mind blowing, much love Inja and lord Kurt. Ahhh this has been a long journey. The wait is over! 👍
@drawntojapan3841 2 жыл бұрын
Super smart and safe design choice housing the chain inside the frame itself. This is an amazing little machine. Thanks for the video :)
@davidquinn5430 2 жыл бұрын
Cool guys.I am tinkering around with the idea of making one and was researching on the tube and here you are. Very inspiring.very well done 👍🏻
@cscheatum 2 жыл бұрын
This was such a sick build. I love the scoop tank, no electrical builder has thought of that to keep the controller cool, brilliant idea.
@TheInja 2 жыл бұрын
Really set the mood of the bike. 👌🏽
@ElectraFlarefire 2 жыл бұрын
Does have the downside that any rain goes right over the controller and electronics.. :) But it is a unique look and good for dry days! :)
@sneerisraely9740 2 жыл бұрын
If you guys actually build these to sell, I would totally buy one it looks amazing has a cyberpunk feel I love it. Great job
@TA-cp7oz 2 жыл бұрын
Just posted an offer for them to do such.
@hermanstokbrood 2 жыл бұрын
To say it differently: put your money where your mouth is ;)
@momotabtutino7842 2 жыл бұрын
Same
@projectgamer3369 2 жыл бұрын
Hell yeah l would love to buy one to
@erikayala163 2 жыл бұрын
I agree, you guys should start a project like this for regular citizens to get an electric motorcycle instead of a regular gas one
@tebrannan 2 жыл бұрын
I love that I can watch the "summary" video, and go back and watch the individual videos that interest me! Way cool!
@pmdub806 2 жыл бұрын
WOW, Nice work guys. Very inspiring. Thank you both for this video.👍🙂
@herr_panzerfaust2514 2 жыл бұрын
Im speechless. This is absolutely amazing, the exact same thing that i´m planning to build in the near future. Congratulations guys, the bike looks INCREDIBLE!!!
@TheInja 2 жыл бұрын
Thanks dude!!
@joshuahunt9520 2 жыл бұрын
Love the end result, the concept and execution. My only gripe is the back corners of the large battery box near your knees, looks like a major catch point if your ever thrown forward. May never happen and hoping it never does. Mad work!
@martinjames6798 2 жыл бұрын
love what you guys are doing, great job!
@jamesphillips8721 2 жыл бұрын
Just found you guys and subscribed almost immediately. Great work and why haven’t you two started a electric bike business. Truly awesome.
@JShel14 2 жыл бұрын
This honestly deserves a million views. Such a cool project, and an awesome functional vehicle came of it.
@TheInja 2 жыл бұрын
Thanks, Justin! 👊🏽
@Three2NineProject 2 жыл бұрын
Almost!
@Mikeofindy 2 жыл бұрын
This channel has had such positive growth. Glad to have watched it all happen and what is yet to come.
@TheInja 2 жыл бұрын
Glad to have you!
@omaraymanbakr3664 2 жыл бұрын
this is just amazing especially the supercapacitor ,final shape came out wonderful. all the best ❤️
@bhaskarstechniques7689 2 жыл бұрын
It's really awesome.. liked the overall look and fine finishing 👍👍
@jindevil72 2 жыл бұрын
Tears be rolling down my cheek when the final product came out. Good job and well done guys ✨💪🏼
@simonkennedy6116 2 жыл бұрын
Well done Inja, I've been following for the build as inspiration (but I'll have to rewatch to write down the instructions). Have fun out there
@dagienvironmental4423 2 жыл бұрын
Absolutely amazing no word to say Thank you for sharing
@AndrewHass81 Жыл бұрын
This is very similar to what I'm doing with a 78 Yamaha 200. Thank you for sharing your build! It's awesome to see other builders/mechanics/shadetree out there that are diving into their first electric builds.
@troop8829 2 жыл бұрын
Feel so good seeing that you guys have completed The café racer I’m so excited for you guys🤘🤩
@marianomolina263 2 жыл бұрын
Great job!! Love what you did here, you guys are real Pros!! Nice job putting this video together too!👍
@TheInja 2 жыл бұрын
Thanks a ton!
@andrewhannay 2 жыл бұрын
It looks amazing where you live. Those aerial shots were fantastic. Excellent work!
@aman121495 2 жыл бұрын
Damn you guys worked your asses off no joke! congrats on the sick bike 1 of 1
@LatinDanceVideos 2 жыл бұрын
Amazing project. This looks very neat and tidy. I’ve been expecting some builds with these batteries, very cost effective. Now I’m super keen to see the real world performance
@avonneave2131 2 жыл бұрын
Really well done fellas, and now for the production line. All the best from here in West Australia
@jcpatrick4824 2 жыл бұрын
Great project fantastic educational detail thank you gentleman 🙏
@rayondinanath4536 2 жыл бұрын
Excellent work fellas. Love the project.
@michaelspiteri2013 2 жыл бұрын
boys it looks so sweet - massive congrats to you
@TheInja 2 жыл бұрын
Thanks a ton dude!
@LordCurt 2 жыл бұрын
Such a crazy process! It’s surreal to watch it all play back. Beyond excited for the future projects! Everybody stay tuned!!
@SniperSnake50BMG 2 жыл бұрын
You're a warlock Curt. Excellent job!! In wondering if you actually have more to credit for the job about battery pack, supercap pack and drivetrain...
@turbotim9009 2 жыл бұрын
Impressive work my dude
@MrJasenstewart97 2 жыл бұрын
I don't build electric bikes anymore and switched to gas bicycles for affordability and you helped inspire me. If I could afford the electric components still I'd do it in a heartbeat but I have a special needs cat with developmental issues and I've had to take the money I was using for medical reasons after I rescued him but I've been having a lot of fun tinkering with the gas bikes. This is an amazing build tho and can't wait for my promotion to kick in so I can get back into the electric scene
@thechileancarpenter7201 2 жыл бұрын
Love this! I would love to build something like this. Awesome work guys!
@kazukarukelley 2 жыл бұрын
Wicked shirt Lord Curt! Epic project and really enjoyed the ride to get here!
@donaldwright2426 2 жыл бұрын
What more can we say than "congratulations" on your hard work and dedication to your project. You are very inspiring young men. I'm also building my dream, a tadpole electric 3-wheel motorcycle. And thanks for links to your component list; this will facilitate my research and my purchases.
@TheInja 2 жыл бұрын
Very cool!
@Merc399 2 жыл бұрын
Much respect for open sourcing this build man!
@dandaniels851 2 жыл бұрын
Great job you bloke's 👍 extremely impressed with your attitude toward this project. Your patience and attention to detail is admirable. I built a electric mobility scooter in one day and it turned out great, but this is a whole other level. I especially liked the test run in shorts and sandals 😆 ya gotta be just a little bit crazy ay, or life's no fun. Cheers from Australia. Dan.
@DaBaltimoron 2 жыл бұрын
Looking forward to a 0-60, top speed, and range video!
@sijonda 2 жыл бұрын
Same. My attention is on the range with that lofty around 180 mile claim. DIY builds that I've seen about 3+ years ago always had a poor range limitation and it's why I walked away from going beyond just research. If it's finally possible I'd get back into digging online and consider trying to build something. The majority of my traveling beyond walking is a 200 mile round trip visiting my family every few weeks.
@Torxed 2 жыл бұрын
I'm also curious about range. Great job on the build tho!
@HubbHubbs 2 жыл бұрын
Real world its a safe 100 miles at highway speed from the 13kwh pack.
@sijonda 2 жыл бұрын
@@HubbHubbs Highway speed being what? 55mph or 75? I'd be cruising at 80 depending on traffic. I'm being realistic since that's literally about what must people go around here.
@GimmeDaBacon 2 жыл бұрын
Yes
@detlyn 2 жыл бұрын
So rewarding to see it come together no doubt. Huge learning curve. Well done! Great you kept the 750 tank profile for some reference. The battery was a work of art alone:))
@cleberrodrigues6715 Жыл бұрын
Muinto linda
@johnoldonekanole602 2 жыл бұрын
Great to see young people with your talents doing something constructive . Thank you for sharing .
@g0ldensample21 2 жыл бұрын
Congrats guys! Well done.
@BrutalFates 2 жыл бұрын
DUDE AMAZING! This looks so sweet, wish I could see it one day! Keep going and keep dreaming!
@TheInja 2 жыл бұрын
Appreciate it, my man!! 🙌🏽
@dragsterbixing2584 2 жыл бұрын
Building my own bike would be a dream for me, but guys are living it, i feel a little jealous at the same time loved your work!
@heretikpapy 2 жыл бұрын
AWESOME PROJECT !!! I'm jalous :) I envy you very much !! You totally deserve that final awesome product. Congrats!
@aaronj.edelman916 Жыл бұрын
Awesome content! I love the dedication, subscribed for sure!
@coolissimo69 2 жыл бұрын
Finally done Inja, looks something from the future.Looking forward to watch the top speed and range.
@TheInja 2 жыл бұрын
Can't wait to test it out and see what she's got!
@manxman6165 2 жыл бұрын
Amaze balls Just love this home build stuff that looks way better than main stream kit Impressive 👍
@johnnyray34 2 жыл бұрын
That's a badass ebike. You guys should be proud of that build! I want one! You guys should showcase this beautiful machine!
@mikeysgametime8914 2 жыл бұрын
Impressive bro ,really kool, come along way man interesting content, video like this where something works out for you, and then videos when u look in a shipping crate and see a pink roof, i felt so bad for you lmao with the scamboughouni
@alejandrotapia868 2 жыл бұрын
Awesome build guys!!! She looks badass...
@TheInja 2 жыл бұрын
Can't wait to see what she's got on the roads!
@onsafari 2 жыл бұрын
You guys are absolute legends. This build literally blew my mind.
@TheInja 2 жыл бұрын
Thanks bro 💯
@chancecarlton8403 2 жыл бұрын
Love it. Exactly what I've been wanting.
@kiddfpv 2 жыл бұрын
This is sooo cool 😁 and those Fpv shots too👌🏼
@kallikantzaros4444 2 жыл бұрын
A lot of work but a very nice outcome! Congrats guys! 👍🔧😊
@manuelsalonga2916 2 жыл бұрын
great diy electric bike so far. amazing
@willc4922 2 жыл бұрын
Totally awesome build .... Great break down on electric set up on this
@vijeandran 2 жыл бұрын
Amazing..... It's next-generation BEAST!!!! LOVE FROM INDIA!!!
@markserbu 2 жыл бұрын
Very cool, very nice work! Inspirational!
@Bobwa2008 2 жыл бұрын
Nice work but it’s ugly
@hoodrobin781 2 жыл бұрын
You can clearly see all of those late hours rubbed into that air scoop on the “tank.” Bang up job guys. Oh, and the mileage, noice. Very inspiring, thank you.
@RCnerd74 Жыл бұрын
Love your build with this crazy low budget. Congrats to the successful first rides :o)
@drone-vision Жыл бұрын
Amazing project and great teamwork!!! Drive safely that beast ;)
@klausbrinck2137 2 жыл бұрын
Great !!! U could build a delta/star-switch (where the 3 cables go IN the motor) in order to end up with 2 electronic gears, one for launching and accelerating, and one for cruising and top-speed... Makes life easier and extends the range and battery-life by raised efficiency.
@beardedgrandpagaming798 2 жыл бұрын
What you accomplished is amazing!!! To have that skill set and put in action. Its a beautiful thing and a beautiful bike. What I wouldn't give to own one of those.
@xsinx6577 2 жыл бұрын
theres only one suggestion i can make that may or may not be helpful and thats to just put a short fender in front of the rear wheel so that youre not kicking dust, dirt, or even rocks at that motor. beyond that you guys did a phenomenal job and this is one of the coolest things ive ever seen. Makes me want to get into fabrication to make some cool one off bikes that are electric
@leistungep3 Жыл бұрын
Amazing build two thumbs up! 👍👍
@robertbowersiii6416 2 жыл бұрын
Awesome build guys! I also very much enjoyed the music throughout this video as it was not the annoying repeats and/or terribly loud. Would you be willing to share a Playlist of the songs? Anyhow, awesome stuff ya'll do and I can't wait to see more videos. Keep it up and God bless ya!
@ElDiabloDirt 2 жыл бұрын
Sick build, i love the idea with the supercapacitors! I would think about changing from a mechanical contactor/relais to MOSFET. Relais tend to open due to bigger bumps/vibrations.
@vandamnyc 2 жыл бұрын
Good Job guys, nice work done and awesome things you guys are doing
@mmillslagel 2 жыл бұрын
Congrats guys -- great job!!
@Rareparrot 2 жыл бұрын
Utterly fascinating :) Looks futuristic too..... Is it water safe, like would a strong downpour get anywhere it shouldn't? Very inspiring !!!
@halfnelson6115 2 жыл бұрын
Sweet. It's one thing to do a build in a shop full of machines/tools, it a whole other ball of wax to build with limited tools/experience. #respect Great job, fellas. Well done.
@edubassplayer2 2 жыл бұрын
Why can't I like this video twice? Beautyfully done!
@prolificgamesmanship Жыл бұрын
Incredible! You're ridin' on one helluva high!
@buckbuchanan4810 2 жыл бұрын
Love it, the only thing I would add is a mesh grill on the tank scoop to keep critters, debris, etc. from going inside
@pablo6505 2 жыл бұрын
it's amazing what you guys did! and also it spookes me every time what's called street legal in the us :D but still... great for innovation :) And honestly - the bike looks rad!!
@tissuepaper9962 2 жыл бұрын
All the regulations about only using approved OEM parts and basically only being able to drive stock, mass-produced vehicles leads to a lot of waste, surely.
@christinagehret 2 жыл бұрын
You guys our a blessing and amazing people to build a sick bike like that it looks better than a Harley man. Great job wish I had friends like you guys that do the same stuff I like and it blows my mind with this build. I will subscribe to you and congrats on getting it done even when some things I'm sure were hard. I have always wanted to build a electric bike but I'm on ssd Disability and never have the spare money. Glad to see people doing what they love to do to great job again.
@abdulwahidhameed Жыл бұрын
Great work guys. Very inspiring.
@TheInja Жыл бұрын
Thanks man!
@curiousmind4870 2 жыл бұрын
Use your own brand, definitely. Great bike! Great build!
@maxbirkenbeil1811 2 жыл бұрын
That hood scoop on the gas tanks is sick!
@kevinmcmanis7335 2 жыл бұрын
Great Video! Very exciting and cool! Would love to have one.
@jdubbuttm 2 жыл бұрын
Really enjoyed this. New subscriber on my end. Thanks for the awesome video. Looking forward to more projects and updates on this one.
@TheInja 2 жыл бұрын
Coming soon!
@nickjamesdetecting 2 жыл бұрын
Just stumbled onto your page, and so glad I did! This damn bike is AMAZING! One of the coolest electric bikes I've ever seen, wish I could double like this video! You guys did such an awesome job! Way to kill it dudes!!!
@gazehound 2 жыл бұрын
Dude the supercaps are so cool. I've been waiting for someone to put them on an ebike but an electric motorcycle is arguably even cooler
@leowen8814 2 жыл бұрын
Very cool project!! Nice work!
@marcteleki2801 2 жыл бұрын
Only one think to say amazing work so cool love your video looking for anything else you guys do thanks
Ladi & Margaret
Рет қаралды 277 М.
Rich Rebuilds
Рет қаралды 427 М.
The Inja
Рет қаралды 143 М.
The Inja
Рет қаралды 333 М.
James Biggar
Рет қаралды 1,6 МЛН
Нефтьмагистраль
Рет қаралды 717 М.
Expert Mechanic
Рет қаралды 24 МЛН
Eidan Sanker / Don’t Touch My Car
Рет қаралды 21 МЛН
Eidan Sanker / Don’t Touch My Car
Рет қаралды 21 МЛН