DIY LEAD JIG MOLD

Рет қаралды 30,416

TRYING TO FISH

4 жыл бұрын

Mold made of Gypsum powder.

Пікірлер: 29

@joeyg7446 2 жыл бұрын

Great Video! By showing where you failed in your 1st attempt and corrected it proves you are a true craftsman. You have made an excellent lure mold. Thank You...

@mattnaylor145 8 ай бұрын

I used these with the Team Catfish weight slides to make a kzfaq.infoUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.

@asfcharters1 3 жыл бұрын

You should bake that mold on the oven at lowest temperature for a few hours to make sure there is no moisture left in the plaster or other could be very dangerous!

@jamesfosterfishing7040 Жыл бұрын

Inspiring brother! Thank you!

@entengfishingadventurestv4286 3 жыл бұрын

nice master thanks for sharing

@tayfunoztayfun9691 2 жыл бұрын

Isn't the lead casting soft. Do you add anything else to it.

@miamiwax5504 2 жыл бұрын

Do they sell commercial molds for vertical jigs?

@VizagVlogs 3 жыл бұрын

Tried very hard. Successful

@slimpslimp2365 2 жыл бұрын

dry the molds normally and everything will work out

@ajspearfishingdiaries1825 3 жыл бұрын

Can i ask how to make a smooth one on the mold?mine always keep on boiling when i pour the lead..

@TRYINGTOFISH 3 жыл бұрын

make sure the mold is super dry. Try to pour 3 to 5 times to make the remaining water to evaporate.

@jamesfosterfishing7040 Жыл бұрын

Thanks I had this same thing happen

@cakkol3767 2 жыл бұрын

Cak kol josss

@hards7yl3 3 жыл бұрын

What are you using to separate the second gyps detail?

@TRYINGTOFISH 3 жыл бұрын

petroleum jelly or oil

@jhayoutdoorandfishingadven1940 2 жыл бұрын

Sir ask ko lng bkit butas butas cya pag natapos ng matuyo ung tingga

@gabrielaguiaroutdoorwoodwo786 2 жыл бұрын

What is the stuff you are using to make the mold out of ?❓❓👍

@zelenang3537 Жыл бұрын

gypsum powder

@tayfunoztayfun9691 2 жыл бұрын

How hard is the jig with only lead?

@TRYINGTOFISH 2 жыл бұрын

The hardness of the jig is enough for it's purpose.

@jhayoutdoorandfishingadven1940 2 жыл бұрын

Gnyn din kc ang akin pag naibuhos ko na s molde ko pag natuyo cya butas butas ung yare ng pagkakamolde. Anu kayang pwedeng gawin slmt bro

@TRYINGTOFISH 2 жыл бұрын

Dapat tuyong tuyo yung molde. Try mo ibilad sa araw ng ilang araw. Pag natuyo sya magiging maayos na at makinis yung jig

@habagatrandomvlogs7444 3 жыл бұрын

ano po mga materials at saan makaka bili?

@TRYINGTOFISH 3 жыл бұрын

gypsum powder , tingga at stainless steel na wire meron yan sa hardware. Yung tingga gamit ko lumang sinker.

@saadaaly7968 3 жыл бұрын

the mistake u made that u didn't keep the plaster in sun ...u should keep it in the sun for 2 days 2 remove the moisture And heat the mold before u cast

@TRYINGTOFISH 3 жыл бұрын

Yes Lesson learned the hard way.

@cfonvip5151 3 жыл бұрын

Oh, don't you worry. Judging by your little hands, you'll have a long time ahead to improve. And maybe on the way, you will also learn how to speak. Trust me!!!!!