DIY Miniature Clear Drink Bottles | Dollhouse Food, Resin 3D Prints

Рет қаралды 24,422

Күн бұрын

How to make miniature, realistic bottles for dollhouses and dioramas - Miniature Food Drink Bottles/DIY Mini Crafts and Life Hacks for Dollhouse Barbie Accessories
Join my PATREON to download the 3D print STL files for the bottles and more EXCLUSIVE content: / smolworldworkshop
Enjoying my content? Want to see more videos like these? Then please SUBSCRIBE to my Channel and tap the Bell Icon to get notified each time I post a New Video!
I have always wanted to make these miniature water bottles, and I'm so glad they're finished!
I found that 3D printing the bottles out of Clear resin was so much easier than molding and casting them out of clear epoxy resin or UV resin, especially for how small these are in 1/24 scale.
You can easily scale up the files to 1/12 scale and follow the same process for your dollhouses and dioramas. I hope you enjoy :)
Chapters:
0:00 Intro
0:15 3D Models
0:51 Resin 3D Prints
1:15 Clear Bottles
1:48 Colorful Bottles
3:13 Printed Labels
4:38 Painting Bottle Caps
5:00 Removing 3D Print Supports
5:17 Final Result!
5:54 Patreon
6:24 Bloopers
Song: Moving On
Music by: CreatorMix.com
Song: Get Back
Music by: CreatorMix.com
Song: Unstoppable
Music by: CreatorMix.com

Пікірлер: 50

@heatherdaniels-kellar1879 8 ай бұрын

Oh my God, stop! I can’t! This is just too freaking adorable!

@smolworldworkshop 8 ай бұрын

Thank you!!!! :)

@cherylwatts2739 Жыл бұрын

So cool!!! I really enjoyed watching you make these tiny bottles.

@smolworldworkshop Жыл бұрын

Thank you so much!!!

@ShabnamGulnaj-vg2qf 2 ай бұрын

Wow

@silenttraveler7192 11 ай бұрын

Total Awesomeness 😮

@smolworldworkshop 11 ай бұрын

Thank you!!!

@BRAD-ROTT 4 ай бұрын

WOUHOUUUUUUU!!! My 👍 make you 1K on this video!!!!! 💪😜

@gottliebheinrich8413 10 ай бұрын

for the daughters little shop and doll playing the bottles did i made from acrylic glass rod and a lot of sanding and polish. but nowadays with this techniq and the printed labels ... wow, such a small size and perfection! plus with 3d printing one could make special things like the big bavarian beer glasses or a light blue water keg on such a stand.

@smolworldworkshop 10 ай бұрын

That’s awesome! And thank you! Yes the possibilities with 3D printing are almost endless! Thanks for watching :)

@AM-am.pm.d.m.y. 6 ай бұрын

Cool!

@rberg135 10 ай бұрын

This is hilarious, incredible results!

@smolworldworkshop 10 ай бұрын

Thanks for watching!

@presto709 10 ай бұрын

Really nice work.

@smolworldworkshop 10 ай бұрын

Thank you!

@Schex Жыл бұрын

Very cool! Looking forward to more videos!

@smolworldworkshop Жыл бұрын

Thank you!!

@asgarthokan7274 10 ай бұрын

Tooo fantastic . Thank you

@smolworldworkshop 10 ай бұрын

Thanks for watching!!!

@vivianphillips768 Жыл бұрын

GREAT VID I’m gonna go make smol fantas now!!

@smolworldworkshop Жыл бұрын

Thank you so much! And that’s awesome!!

@alliebrewer104 Ай бұрын

Thank you for sharing your ideas and methods of doing them. I also appreciate you giving the name of the programs.

@smolworldworkshop Ай бұрын

Thank you for watching and for your kind words!

@craiglister7110 9 ай бұрын

Starting to watch past videos now 😊 awesome and so good to watch 👍🏻

@smolworldworkshop 9 ай бұрын

Thank you for checking out the older content :) appreciate you and your support!

@kristophermelin7160 Жыл бұрын

They look great - quick couple of questions. Why do you not do a final cure for the resin? And are there any issues with paint sticking long term, or with the bottles remaining sticky? Thanks.

@smolworldworkshop Жыл бұрын

Thank you!! In the past, direct post curing under a uv lamp has yellowed my clear resin before. Some of the bottles I have done are roughly 7 months old and they’re holding up great! The clear coat should hold up fine as long as the bottles aren’t sticky before hand. Just make sure to wash all the excess resin off with alcohol, and let it dry before clear coating. Depending on the clear you use, you may want to wait overnight before handling. Hope this helps!!

@michaelomalley9992 Жыл бұрын

@@smolworldworkshop The yellowing is from "over curing' or basically continued to UV light. Your spraying with the UV spray is a great solution!

@smolworldworkshop Жыл бұрын

@@michaelomalley9992 thank you!

@maxjousserand8822 Жыл бұрын

Formidable, super boulot !! Est-ce que vous partager vos fichiers 3D ? Et ou avez vous trouvez trouver toutes ces étiquettes ? Merci. Max.

@smolworldworkshop Жыл бұрын

Thank you! You can download my 3D files and a PDF of the labels if you join my Patreon (Gold or Platinum) www.patreon.com/SmolWorldWorkshop You can also make your own labels by finding logos and images on the internet, and scaling them to the right size! Hope this helps!

@eTraxx 10 ай бұрын

Dang you are good

@smolworldworkshop 10 ай бұрын

Thank you!!

@IronBridge1781 10 ай бұрын

Great results! What modelling software are you using here?

@smolworldworkshop 10 ай бұрын

Thank you! I use the free version of Fusion 360 to model the bottles, and Chitubox to slice the files for printing. Honestly the bottles are super simple to model, so I’m sure any modeling software should work. Thanks for watching :)

@marccxxshammer6643 10 ай бұрын

👍🏼

@KrastyoKrastev Жыл бұрын

Great video. Subscribed :) What model is your airbrush?

@smolworldworkshop Жыл бұрын

Thank you! My airbrush is a Procon Boy PS-268AR 0.4 single action by GSI Creos. Hope this helps!

@mariopagano8630 3 ай бұрын

looking at the water bottles there real nice are thay for sale would like to buy a bunch from you in 1/25 scale thanks

@grantforsythe1280 7 ай бұрын

What modeling software do you use?

@smolworldworkshop 7 ай бұрын

I use the free version of fusion 360!

@HauntedCorpseGaming 10 ай бұрын

5:21 If only they were edible.... (Soda Pop Gummies)

@smolworldworkshop 10 ай бұрын

Haha yeah if only! Thanks for watching :)

@sabakamahusky594 10 ай бұрын

You sell miniatures?

@smolworldworkshop 10 ай бұрын

Unfortunately not at the moment. Thanks for watching :)

@berthaday3473 6 ай бұрын

Well lemme just run out & purchase a 3-D printer first. (Or just buy bottles on line $1)

@adammackenzie 10 ай бұрын

Our local print shop won't print anything copywritten..

@smolworldworkshop 10 ай бұрын

That’s too bad! Not sure if you have a FedEx near you, I printed mine at their self serve printer just fine!

@xxelaxela333 10 ай бұрын

Stop touching uncured resin with your bare hands!!!!!!

@BRAD-ROTT 4 ай бұрын

SUPER DISAPPOINTED!!! When I saw the miniature, I thought it would be an idea to make miniature bottles from nothing, starting from scratch... But I still like you and love your videos my friend! @^:^@