Well thought out project, thanks. Love your Frenchies too!

This is most likely the best DIY motorcycle lift I have seen so far. I want to make myself one. Can you make a playlist of the videos you have made of this build? Would also be great if you have a simple technical drawing and cut list and share it with us.

Great video. Love the way you show how you solve problems as you go to improve the design

nice work

I built a similar table about 10 years ago to work on rider mowers. I had the same issue getting it to lift the first 6-8". Since I didn't want to raise the deck height and have to mess with ramps, I installed an air lift bag I had laying around under the center of the table. Inflating the air bag lifts the table high enough that the winch can take over and easily raise the deck the rest of the way.

Awesome Motorcycle Lift Table Build!! I am grabbing tips and tricks that you are using and building my first motorcycle lift table instead of paying such a high price.. Thanks

Just a small tip for those who don't have an acetylene torch. You can cover the area where you'll be welding with paper towels, then spray the rest of the surface with cooking spray. Slag bbs won't stick.

True as others have said... probably the best table build on KZfaq... Great...reward yourself...👍👍👍👍 Simon a Brit in Spain 👍

cleanest build on YT for this topic. Very nice & well done A+

Dude! Thing things badass! I need to build one. After working at a shop for a few years as a mechanic, and having a lift table I just cant stand working on the ground anymore! 😅😁

Great video bro thank you its given me some pointers to now build my own 😁😁🤘🤘🤘🤘

Really nice job you did with this build--- so years ago I did the same as well, but I`m thinking to re-do mine after seeing yours--again, great job. Let me know if you plan on publishing build plans for this lift--thank you.

great job, i like it.👍

This is by far the best DIY table I've seen yet. Any chance I could get the lengths in the 1x3 tubing? I am going to build this but need to order some tubing. Only needing the tubing length for the X legs. Thank you in advance and damn fine job!!

Nice build. I would add a safety bar with notches to set heights and hold the load.

Awesome bad ass build your a genius my guy 👍💪💪💪💪⚡️⚡️⚡️⚡️⚡️💪👍💪👍👍💪

Beautiful job, brother. Nicest homemade one I’ve seen yet. Contemplating something similar. What was your total cost into this?

Awesome FAB work I'm a new subscriber for sure. I've been wanting to build a bike table as well for my HD. Any chance of a cut list and plans.

a quedado de lujo un saludo desde España ,

Hey brother, I own a shop up in Rochester, NY, called Asylum Cycles. I stumbled across this video after looking at many lifts and not happy. I have most of the material to build this. Do you have any build plans or materials list you could share? Wondering were the spacers inside the square tube stock and rollers you used.

Very nice Bro

This is beautiful. So I’ve been thinking how you go lower. I think adding a change of direction pulley near the center of the table and dropping it maybe 3” now provides an angle so the cable doesn’t flatten out and pulls against itself. Had the table been made out of maybe 5” stock, that would’ve allowed room to hide the pulley inside maybe? Im so intrigued, I’m thinking of doing a temp fab out of 2x4 wood and see if the theory works.

Hey man, came across this video just like all the others and I agree with them in regards to the "cheap" China stuff. It's just not up to snuff. Looking to do a build like this myself. Would be grateful to know the material you used and how you came across everything. 👍🏼 Thanks for posting a video like this, hoping to see more in the future 👍🏼

Nice build New subscriber cheers

Brilliant...!

Would you be able to give a list of the full components to make one

Great build, do you have the dimensions for everything, would love to build one myself?

Nice job man! 👍👍👍 I want to repeat your project. Chinese lifts are too flimsy for this price. So you would be very kind to make a second detailed video. We'll be waiting! Thanks and good luck! 👍🤟🔨🔩🔧

Very nice build. My fear is not having a safety bar on the table.

Looks cool but i have a concern. I noticed you don’t have have a lock system yet and how easy is it to move around your area? Marz from Sunny So. Cal

Just curious if you have a drawing with some measurements and materials

Awesome

Привет , я из России, жму тебе руку бро, ты просто красавчик!!! Хочу сделать по твоему , очень крутой подъемник!!!

Have you the plan ? Thanks

How much did you have in your lift after you finished. I used an air Bello on the lift that I built.

How much kilos can you lift?

So what did you come up with as the final product.

Good vid, but the noise - is that music, or static? - should be reconsidered, as not everyone is into that sort of thing.

not an engineer proceeds to build a common sense bike hoist thats better than production models.....

Hey I tried building this but ran into a few problems can you help me out?

Any updates? I know we are all busy these days. Just wondering.

Can I contact you when I get home tonight? It is hard to explain.

Can I contact you about my lift. Also bad ass job

Thank you for sharing your DIY Motorcycle lift table. Do you have plans to get started with? Would you feel comfortable lifting a Harley bagger with it? Look forward to seeing your final product.

Zero safety catch, relying completely on that cable?

aprovou nao. e melhor com motor de portao residencial

do you have a drawing on it