DIY: PVC Pressurized Water System on a Toyota Tacoma

Рет қаралды 146,263

6 жыл бұрын

My son works in the field a lot and gets his waders and equipment dirty and muddy. So we came up with this air pressured water tank. It hold around 8 gal. of water. We built the tank out of PVC piping and welded our own brackets to mount inside of his Toyota Tacoma. Since the Tacoma has an electric outlet in the bed it was easy to hook up an air pump . With 25 to 30 psi in the tank the water comes out like a garden hose.Over all it ended up working really well. This would really come in handy when camping or doing other outdoor activities. Everything was bought at a big box store , auto supply and Amazon.
Any questions email me at - themuzshop@gmail.com
Water hose
amzn.to/3EbX1gB
Link to Rubber straps
amzn.to/2Xjs9sp
Stem Valve
amzn.to/2Ltehop
Air compressor
amzn.to/2LuhMuJ
Wen Metal Bandsaw
amzn.to/2MknAaA
Plastic epoxy putty
amzn.to/2H2nQrk
Other Videos
6 way to find to middle of a board plus lap joint trick: • Shop tips: 6 ways to f...
PVC Pressurized water system for a truck:
• DIY: PVC Pressurized W...
Super cool Rolling pins: • Super Cool Rolling Pin...
Wine Barrel Christmas Tree: www.youtube.com/watch?v=FcIpN...
Mortis and Tenon table rebuild • Mortise and Tenon: Tab...
Roast your own Coffee beans • How to Roast your own ...
Meat tenderizer: • How to Make a Meat Ten...
Circle cutting sled: • How to Make : Deluxe C...
How to Make a Peppermill • How to Make your own P...
The Shop Caddy: • Make an iPhone Charger...
Cutting board / wat. .
Fishing Net / wat. .
Wine Barrel Salad Set / wat. .
Wine Barrel wood Cheese Board / wat. . Knife Block (easy) • Woodworking: Making a ...

Пікірлер: 234

@SattvaWoodworks 3 жыл бұрын

I had this same idea last year for my wife’s greenhouse so it could be on a timer while we are on vacation. You are the only person I’ve seen build this. Thought I had an original idea. I’m adding a battery operated timer for a misting system. Only needs 5 minutes a day. Thanks for the video.

@TheMuzShop 3 жыл бұрын

Thanks for watching and what a great idea...

@FerdiGaleon 5 жыл бұрын

Best water port DIY Vid so far, thanks for sharing the how to!

@TheMuzShop 5 жыл бұрын

fuknferdi thank you for the comment and for watching. 👍👍

@anotherone9460 4 жыл бұрын

You're a great father! Thanks for the tutorial!!

@TheMuzShop 4 жыл бұрын

Another One thank you and hope it helps if you build one. 👍👍

@dohnny123 4 жыл бұрын

Super badass. I'm putting this on my f150. This is a great idea.thank you for the video

@TheMuzShop 4 жыл бұрын

Thanks and put one in you'll really like it....

@christinalazo8607 6 жыл бұрын

This is awesome. Nice job!

@BrothersMake 6 жыл бұрын

Looks like a fun project Mike! Enjoyed the video 👍🏼👍🏼

@TheMuzShop 6 жыл бұрын

Thanks Bros. Keep up the good work guys. 👍👍

@marciabrainard9837 4 жыл бұрын

This is the best, easy to follow build yet.....thanks for sharing☺

@TheMuzShop 4 жыл бұрын

Thank you and I hope it's useful for you .....

@JimmiePorterAtStuartArts 6 жыл бұрын

Cool project. A lot of skills came together on this one! And once again I must compliment your editing.

@TheMuzShop 6 жыл бұрын

Jimmie Porter At Stuart Arts thanks Jimmie I use your drill sharpening tip in this build. Thanks for watching my friend. 👍👍

@johnw3805 4 жыл бұрын

Nice work! Solid video and editing too. Saving this to build my own one day.

@TheMuzShop 4 жыл бұрын

Thanks!! Hope it comes in handy for you.👍👍

@jaquesfressier3814 6 жыл бұрын

Cool, i build one for my weekend property than i can take a shower after work. Nice job

@TheMuzShop 6 жыл бұрын

Jaques Fressier thanks glad you enjoyed it. It really comes in handy in many ways.

@silentstorm77 4 жыл бұрын

Great idea brotha! That should work perfectly on my Tacoma also

@TheMuzShop 4 жыл бұрын

silentstorm77 thanks and yes make one it really comes in handy. 👍👍

@CoastalGX 4 жыл бұрын

Great job, guys!

@TheMuzShop 4 жыл бұрын

Glad you liked it

@mr000hunter000 5 жыл бұрын

Good vid going to make this for work truck cheers bro

@TheMuzShop 5 жыл бұрын

mr000hunter000 thanks for watching Bro. Make one you’ll love it. 👍👍

@heyimamaker 6 жыл бұрын

lol, Dogs are so trusting :)

@TheMuzShop 6 жыл бұрын

Yes they are..... Thanks for watching

@VitalArms 2 жыл бұрын

Would be very helpful if you listed out the all the pvc connector parts you used, trying to figure exactly what you used and how on some of those pieces but the video doesn’t show or explain.

@tomasarguinzoni9022 6 жыл бұрын

Very cool idea 👍🏼

@TheMuzShop 6 жыл бұрын

Thanks Tomas

@MDFRESCUER 6 жыл бұрын

Cool idea.

@TheMuzShop 6 жыл бұрын

Thanks and it really work good.

@Rudy80417 2 жыл бұрын

Genius.........

@TheMuzShop 2 жыл бұрын

Thanks 👍🏻👍🏻

@valterleao6795 4 жыл бұрын

Parabéns...., incrível invenção, prático e ajuda muito! Abraço aqui do Brasil 🇧🇷

@TheMuzShop 4 жыл бұрын

UAU!! Obrigado👍👍

@BillKernerDoP 4 жыл бұрын

Great video. Thanks!!!

@TheMuzShop 4 жыл бұрын

Thanks👍👍

@3generationadventure 2 жыл бұрын

Thanks for sharing this video 👌💪

@TheMuzShop 2 жыл бұрын

You are welcome, hope it helps!

@jdcool11 4 жыл бұрын

Nice job.

@TheMuzShop 4 жыл бұрын

Thank you👍👍

@slvice14 3 жыл бұрын

This is AWESOME!

@TheMuzShop 3 жыл бұрын

Thanks so much👍🏻👍🏻👍🏻

@chrismak4859 3 жыл бұрын

Dude, best video on these showers, I just wish I had a place on my Jeep to mount one haha! I just use a Nemo shower and 7 gallon jugs when I am off grid.

@TheMuzShop 3 жыл бұрын

Thanks 👍🏻👍🏻👍🏻

@johnjohnson-sm3yf 3 жыл бұрын

You can get a 12v wash down pump for like rv , boat etc . They come equipped with a pressure switch to stop water flow when not in use . Fix a hose on one side to drop in your jug and the shower on the other. Hook it to 12v and your good to go

@ScorpionRegent 5 жыл бұрын

The Muz Shop - Nice build. Love the custom welded hangers. Hey it's your day job, so of course, your beads are perfect . The quick release system is pure gold. I have a few humble suggestions for the next build. Your paint job which will start to show scratches double quick. Try covering the whole works with black bed liner or undercoat to give it a extra thick skin. You might consider switching the hangers the passenger side. When parked in the street it's a lot easier to fill up with a hose at the curb rather than run it all the way across (undo, around) the truck and perhaps stand in traffic. Once again nice build and thanks for sharing.

@TheMuzShop 5 жыл бұрын

ScorpionRegent thanks good tip on the paint. As for the side we mounted it , was because the compartment and outlet for the air compressor was on that side so we didn’t have to run chords across the bed. Worked out great. Thanks again 👍👍

@ScorpionRegent 5 жыл бұрын

@@TheMuzShop Truth is for the air gap your going to fill on a full tank you could just as easily use a bicycle pump.

@IAnonymous3 2 жыл бұрын

This is a great video. I have one of those stupid ass bed liners that’s plastic so I’m not quite sure where/how to mount it……. Possibly large washers backside in through the plastic itself ( access holes for d rings forward and aft). Wander if it will hold well enough…….. pretty durable material. Anyone else have this issue? How’d you deal with it? I’m all ears to any potential solutions….. thanks guys…..

@rx8dude907 4 жыл бұрын

Looks like alot of work

@TheMuzShop 4 жыл бұрын

Not really...lots of fun.

@CMJSC1997 3 жыл бұрын

best one ive seen yet

@TheMuzShop 3 жыл бұрын

Thank you so much!!!😁

@lemonte9807 3 жыл бұрын

quick and simple. 😎

@TheMuzShop 3 жыл бұрын

Thanks for watching 👍🏻👍🏻

@RiverbendlongbowsOutdoors Жыл бұрын

Sweet 👊🏻

@TheMuzShop Жыл бұрын

Thanks 👊🏻

@matt89447 3 жыл бұрын

Safer to add a stand pipe along pipe to compress air. If completely full off water you'll have hydraulic issues. Air compressors do not compress water. Unless you make a air pocket by lowering level a little.

@davidzoyoquila941 Жыл бұрын

I’m new to this, could you explain how this works? Will a standpipe create an air pocket?

@matt89447 Жыл бұрын

Yes sir!

@Robert-no9jk 5 ай бұрын

@@matt89447thinking about making something like this also. Have no idea what a stand pipe is though. Can you explain a little more please?

@harrisonlofranco 3 жыл бұрын

awesome!

@TheMuzShop 3 жыл бұрын

Thanks!

@lstack938 Жыл бұрын

How long will the full tank last while pressurized. Like if you held the hose on how long before it loses pressure?

@bernardkinsky1637 4 жыл бұрын

We do a similar setup to pump diesel from tanks to tank

@TheMuzShop 4 жыл бұрын

Cool , I bet that's works great ....

@van_mod1 Жыл бұрын

Word to the wise...there is 6" PVC that is meant for pressurized applications (typically up to 180 PSI) and there is PVC that is only meant for gravity flow. Buy the former for this kind of project. My only concern is hanging the 50-60 pounds of weight (when full) on the side of a vehicle roof rack...I'd be using a stainless clevis hanger mounted sideways.

@YamaOverland 4 жыл бұрын

Great Video! Can you give us the list and size of materials needed? links would help too. Thank you so much.

@TheMuzShop 4 жыл бұрын

Thank you... There is a list of a few ideas in the description as for the PVC pipe we used 6" x 6' long, but can use whatever works for you. It's been a while since the build so if you any questions a long the way email me themuzshop@gmail.com.

@letmeaskmydog5116 5 жыл бұрын

Great Build! You had some great ideas that helped me with mine! Was wondering since the weight (maybe 60-70lbs loaded?) is fully supported by the factory rail system, have you experienced any bending or warping to the rail? Thanks for the vid!

@TheMuzShop 5 жыл бұрын

LetMeAskMyDog thanks for watching. The weight of the tank is resting on the wheel well , the brackets and rubber straps are just holding it tight in place. Have fun building...👍👍

@philhare7915 Жыл бұрын

Would you be kind enough to provide a list of parts

@electrocresent 5 жыл бұрын

G'day really like the idea, wondering you have tried to see how much pressure it can take as in when pumping air in or with water + air does it need some sort of pressure release valve for when it heats and expands? Thinking about making one or two for camping

@TheMuzShop 5 жыл бұрын

Jeffrey Webster I think we would always fill it to 30psi and that worked fine. We never pushed it any higher. But since the video I believe my son put on a pressure release valve. Thanks for watching.

@electrocresent 5 жыл бұрын

@@TheMuzShop Cool, thanks for replying also did your or son have to top up air when water got lower or didn't really make much difference?

@TheMuzShop 5 жыл бұрын

Jeffrey Webster you could add some air if you want to have the water force higher, but for what he is using it for there was no need. It was made basically to rinse waders and tools off.

@janmarino3547 3 жыл бұрын

Good morning , I love how you made this water Thingy ! I want to make a couple of them myself! Do you have a list of what parts you used and what sizes they are? I have all the tools to make it but looking at your video I'm not sure of the sizes and names of the PVC you used. I want to order on line everything but not sure of names and sizes of everything I'm looking at in your video. Thank you I have looked at some others and yours looks the way for me to go ! Thanks Jan

@IAnonymous3 3 ай бұрын

Realize this is 3 years ago, but did you ever figure this out? I want to go get the pieces tomorrow and have no idea where to start. Won’t think Home Depot has these….

@chaboi7772 3 жыл бұрын

Hey, I'm a newbie to this and am going to make an overlanding rig on a budget! I have an air compressor at home but I don't have one to keep in the vehicle. If I pressuerised the tank how long would it keep the pressure? Thanks

@fishtacoma 3 жыл бұрын

Technically . . . forever. Unless you use the water and de-pressurize it OR if it leaks

@Fn_stefan 5 жыл бұрын

What's the blue stuff called you.put on the metal to make your scores and measurements?

@TheMuzShop 5 жыл бұрын

Thanks for watching, you can get this in red too. www.amazon.com/Dykem-Layout-Fluid/dp/B0018ACR6G/ref=sr_1_2?keywords=blue+metal+dye&qid=1551250189&s=gateway&sr=8-2

@TheYankmchain 4 жыл бұрын

Hey Muz. Mad skills. I'm curious why a 45 on the INSIDE of the one end? I think on same side as shrader valve. Thx.

@TheMuzShop 4 жыл бұрын

Ya I'm not sure why we put that 45 in, but we ended up replacing it after testing the tank. That 45 stoped us from filling the tank to capacity . So we replaced it with a straight piece and a new valve.. Notice at the end of the video you see a new value.Thanks for watching and commenting. 👍👍

@robcooper3929 6 жыл бұрын

Love it Muz! Can you add a solar heating component for warm camping showers?

@TheMuzShop 6 жыл бұрын

Rob Cooper actually being black it get pretty warm on a warm day. Thanks Coop.

@illmasm Жыл бұрын

What kind of rack sits on your truck?

@lucasmcpeters7638 5 жыл бұрын

Where did you find the fittings with the length you have? I can only seem to find very short fittings

@hamaljay 3 ай бұрын

Hardware store or mc master car.

@MecanicodeTurno 5 жыл бұрын

Hi Sir, could you explain why to use putty intead of pvc glue for the whole project?. Have a Taco and want to make two tanks

@TheMuzShop 5 жыл бұрын

Hi, we used putty on parts that were not tight like a factory fit. PVC glue only works good if the it’s a nice tight fit. Also not with metal, like the stem valve

@MecanicodeTurno 5 жыл бұрын

@@TheMuzShop True that, makes total sense. Thank you

@TheMuzShop 5 жыл бұрын

gioquin83 thanks for watching.

@SmittyTuck 5 жыл бұрын

This is amazing!!!! Thanks for sharing, I will be constructing one of these soon!! I have a 2018 Tacoma, I would pay you for to make some brackets =)

@TheMuzShop 5 жыл бұрын

Thanks and glad you're going to make one. Try to see if you can make or get a bracket of so sort. Email me if you have problems....

@TheMuzShop 5 жыл бұрын

85577alarm we used 6” pvc pipe.

@SmittyTuck 5 жыл бұрын

@@TheMuzShop I do not have access to the tools to construct such brackets, I took this idea to a local fab shop, showed them the video and discussed making them. The guy was going to charge $300 to make these brackets!!

@TheMuzShop 5 жыл бұрын

Liberty1776 $300 for to piece of metal.... that’s crazy. I’ll do it for $295. 😳😂😂joking ! Email me and we’ll figure something out, no worries. TheMuzShop@gmail.com

@johnjohnson-sm3yf 3 жыл бұрын

You might be able to use a bracket the use a superstrut bracket. They make pipe hangers for that .

@shockersworld3199 5 жыл бұрын

Love the video bro, what type of epoxy is that and where can you get it. Also you s it a 1 part or 2 part?

@TheMuzShop 5 жыл бұрын

Thank you! It's a putty that you cut off a piece and knead it and it's ready to go....Here's a link to the one we used- amzn.to/2H2nQrk Thanks again👍👍

@northeastrailway. 2 жыл бұрын

The 6inch pvc pipes I just looked at say "no pressure " on them, so I didn't buy one. Should I just look passed that and use it anyway?, I mean 30 to 40 psi doesn't seem like much pressure at all.

@TheMuzShop 2 жыл бұрын

Ya it has worded find for us......👍👍

@ndramirez Жыл бұрын

Where did you purchase the adjustable rubber straps?? And what size PVC pipe did you use?? Any information will help thanks in advace

@TheMuzShop Жыл бұрын

We used a 6" pipe and about 5' long. The rubber straps I got on Amazon there is a link to those along with other build items used in the video listed in the description below the video . Click on "show more" Thanks for watching

@TheWeekndCamper Жыл бұрын

Amazing video! Short and sweet. Can I install the fill port and the faucet on the same side or should they both be on separate sides? Does it make a difference? Thanks!

@TheMuzShop Жыл бұрын

Thank you. 👍👍 I don’t see any reason it would make a difference as long as the tank is close to level so you can fill it to the top, but that’s important either way. Have a fun build.

@bandjolyn 8 ай бұрын

About to build one for my camper truck, thanks for the vid. Update after these years? Do you still use it?

@TheMuzShop 8 ай бұрын

Thank for watching. My son has it and he still uses it on camping trips. 👍👍

@rgoff-road5173 4 жыл бұрын

Is the water drinkable as well? or did the items you use make it not drinkable water? This would be great to take up to the mountains for a camping trip.

@TheMuzShop 4 жыл бұрын

The only idea used in question would be the putty epoxy . But if you were to make one look it up or replace it with something else. Thanks for watching.

@mikeurnun4152 3 жыл бұрын

Hi - What was the PSI rating for the PVC that you've used? Looks like it's a 6" PVC..

@TheMuzShop 3 жыл бұрын

Yes it is a 6" pipe...Don't no the rating but we have had it up to 55psi....

@bruceleeroy9887 Жыл бұрын

How much for the rail mounts ?

@operator1018 Жыл бұрын

Two thumbs up

@TheMuzShop Жыл бұрын

👍👍 back at ya....

@RhimDjaab 3 жыл бұрын

Just went to Home Depot and then a Ferguson’s to make one of these. They warned me to not make one because the threaded fittings will not hold the pressure over time. Did anyone find alternatives? Looking to make one out of 3 inch pvc.

@TheMuzShop 3 жыл бұрын

I’m pretty sure my son doesn’t keep it under pressure all the time. If you have that pump just fill it with air when needed. He’s had no problems with his. Thanks for watching. 👍🏻👍🏻👍🏻

@Toyotaetc 11 ай бұрын

Did you get the pvc pieces at lowes/Home Depot or a pluming store? Having a hard time finding a few too copy your build.

@TheMuzShop 11 ай бұрын

Home Depot. There is a few links below the video in the description to help find a few parts. Thanks and have a fun build. 👍👍

@singhmaster4 3 жыл бұрын

What are you sealing the air valve stem with and other pvc attachments?

@mayers19851ify 3 жыл бұрын

Jb Weld plastic. I’ve only used plumber cement.

@Antho2529 5 жыл бұрын

can water come up through the valve and into your air compressor?

@TheMuzShop 5 жыл бұрын

No, its a value like you have on your car tire, we haven't had a problem like that yet...

@jedintalan 4 жыл бұрын

Is the tank full of water or did you fill it like about 80 to 90% of water, then filled it with air? And have you tried increasing the psi above 30?

@TheMuzShop 4 жыл бұрын

Probably filling about 90% and my son took it up to 40 a few time , worked well....

@jedintalan 4 жыл бұрын

@@TheMuzShop cool, thanks! I'll take note of that

@dddbbb4731 5 жыл бұрын

Where did you get the rubber straps? Technical name???

@TheMuzShop 5 жыл бұрын

Thanks for watching .. Here is a amazon link to the type of strap. Check it out they come in all different styles and sizes.....www.amazon.com/Quick-Fist-Super-mounting-equipment/dp/B007HOG4DE/ref=sr_1_4?crid=3A4E9UU7HSK74&keywords=quick+fist+rubber+clamps&qid=1555450529&s=gateway&sprefix=quick+fist%2Caps%2C511&sr=8-4

@ArbitraryLifestyle 5 жыл бұрын

I want this for after-ocean adventures, but I wanna put it under my truck / hidden.

@TheMuzShop 5 жыл бұрын

Nice !! There is a video out there that the guy uses his hollow bumper for the tank.... happy building .

@mavila31033 5 жыл бұрын

I like it where it's behind the bed so the sun can hit it so when you come out from a day of Surfing or swimming it's nice and warm

@ArbitraryLifestyle 5 жыл бұрын

@@mavila31033 Totally! I don't think I'll have an issue with warmth in Florida haha, but that Pacific ocean is FURREEEEZZIINNNGG.

@timjeffrey5009 3 жыл бұрын

I'd love to get those rubber adjustable straps you used. Where can I get those?

@TheMuzShop 3 жыл бұрын

There are links to most of the things used in the video below in the description. Thanks for watching. 👍🏻👍🏻

@XcessCapital 4 жыл бұрын

Well this is a highly underrated video. Thank you so much for showing this. What's the diameter of the pipe?

@TheMuzShop 4 жыл бұрын

Thank you for the kind words and support. The pipe we used was 6” in diameter.

@matthewabram3443 4 жыл бұрын

How many psi does it crank up to? Max psi for pump? Max psi for pipe? And how long does the water last at full power?

@TheMuzShop 4 жыл бұрын

the pump goes to 70lbs as for the pipe not sure the max but we've pushed it to 40lbs and it was fine.... Its stays powerful longer than you would think, not sure time wise... thanks for watching.

@matthewabram3443 4 жыл бұрын

@@TheMuzShop thank you man! Nice build!

@esatterthwaite 5 жыл бұрын

Where did you get the rubber mounting straps? What are they called?

@TheMuzShop 5 жыл бұрын

Eric Satterthwaite Thanks for watching, here’s the info....Super Quick Fist Clamp for mounting tools & equipment 2-1/2" - 9-1/2" diameter www.amazon.com/dp/B007HOG4DE/ref=cm_sw_r_sms_c_api_uHQKBb9XX7WSQ

@yousufgolle9556 5 жыл бұрын

Can you use it for automatic washing machine (7kg)?

@TheMuzShop 5 жыл бұрын

YOUSUF GOLLE thanks for watching. Not sure about the washing machine question???

@joeymorris9187 4 жыл бұрын

Nice video........what was the putty you used to seal the joints?

@TheMuzShop 4 жыл бұрын

Thanks and the putty( amzn.to/2H2nQrk) in the description along with other products used....

@alisabanda1938 6 жыл бұрын

Impressive! What is the water capacity?

@TheMuzShop 6 жыл бұрын

Alisa Banda it holds close to 8 gals.

@DavidUthmann 6 жыл бұрын

What size PVC was the main pipe made out of?

@TheMuzShop 6 жыл бұрын

We used 6" pipe and made it 5' long. It holds about 7 1/2 gals. Thanks for watching.

@matpinato8892 5 жыл бұрын

How long does it have decent pressure for if pressing trigger continously? I done similar but with a water pump and used my rear bumper as the water tank on a wrangler.. Have a different vehicle now that bumper won't hold water so looking to do the same..

@TheMuzShop 5 жыл бұрын

It actually pumps water for a surprising long time, ( never timed it) but with this set up you could quickly pump more air in the tank when the water pressure weakens and until you run out of water. Hope that helps and thanks for watching. If you need to know a more accurate time, I could ask my son. Let me know... Muz

@mjohn8227 4 жыл бұрын

Good set up. What are the steel bracket measurements ?

@TheMuzShop 4 жыл бұрын

Thanks I'm glad you like it. I don't remember the exact measurement but it looks like 4 x 8 x 1 1/2 inchs but whatever works for your set up is what you should do....

@mjohn8227 4 жыл бұрын

@@TheMuzShop ok thanks...same truck short bed...

@justjeepin 4 жыл бұрын

Why use the putty and not just pvc cement/epoxy?

@TheMuzShop 4 жыл бұрын

thanks for watching. The putty was used on the metal air value and any other part that I had to drill the hole cause they were not a factory fit or a perfect fix, to fill in the gaps.....

@alisabanda1938 6 жыл бұрын

When did you start welding? Impressive display of various skills.

@TheMuzShop 6 жыл бұрын

Alisa Banda I’ve been taking welding classes at Laney JC. Do much fun.

@alisabanda1938 6 жыл бұрын

Way to keep growing your skills!

@TheMuzShop 6 жыл бұрын

Alisa Banda your support really means a lot. Thanks Thistle 😘

@BGSwiftHD 4 жыл бұрын

Great video! how much PSI can that hold? thanks :)

@TheMuzShop 4 жыл бұрын

Thanks and we put in 40psi never tried to max it out...

@russwillknot 4 жыл бұрын

Why did you using a table saw to cut the pipe make me tense?

@TheMuzShop 4 жыл бұрын

Russ no reason , it seemed like the quickest and easiest at the time. Worked out ok , I wouldn’t recommend it... thanks for watching.

@sanchomanzano7882 4 жыл бұрын

What size is the main pvc pipe that holds the water?

@TheMuzShop 4 жыл бұрын

Sancho Manzano we used 6” pipe and it was 5’ long. Thanks for watching. 👍

@patricioelosua5886 2 жыл бұрын

It's been a long time since you uploaded the video haha, but want to ask if you have a link for the hose? I cant find a thin hose like that with the connector for the valve. Great video!

@TheMuzShop 2 жыл бұрын

Thanks and here is a link to the water hose amzn.to/3EbX1gB 👍👍👍👍

@patricioelosua5886 2 жыл бұрын

@@TheMuzShop thanksnfor the reply!

@TheMuzShop 2 жыл бұрын

@@patricioelosua5886 there are few more items listed in the description below the video 👍🏻

@carlojames2658 3 жыл бұрын

How much for you to make that exact setup for my Tacoma with the brackets? I’m serious I will pay for this

@TheMuzShop 3 жыл бұрын

Thanks for watching and wanting one of these , but by the time I make it, with material , labor and shipping you are better off just buying The Road Shower amzn.to/3dl7biW I think.

@edwurmb227 4 жыл бұрын

Any trouble with it freezing/using in winter?

@TheMuzShop 4 жыл бұрын

Good Question. We are in Ca. so there hasn't been a problem but I would think there would be if you had the tank full and the weather was below freezing long enough......🥶

@TheAbear360 Жыл бұрын

Could just do a sealed system and let the city water pressurize the tank. Normally around 80psi and the air that was in the tank will compress and become propellant

@TheMuzShop Жыл бұрын

Cool!!

@freepilot7732 5 жыл бұрын

Why did you make that elbow piece on the inside?

@TheMuzShop 5 жыл бұрын

Good catch! We actually changed it out to a straight piece after, cause it was not allowing us to fill the tank all the way. thanks for watching.

@freepilot7732 5 жыл бұрын

@@TheMuzShop o I wasn't being facetious. I literally wss asking your reasoning for the elbow. I good I can take from your response that it didn't work well bit either way what was your original reason for it. Honestly curious. Thanks

@TheMuzShop 5 жыл бұрын

@@freepilot7732 Thinking back I really don't think there was a real reason for the elbow. We needed something to go through the wall to hook up the intake value and that was all we had...

@rinooneone3 5 жыл бұрын

sweet saw what brand is it?

@TheMuzShop 5 жыл бұрын

The Metal cutting bandsaw is a Wen. It is relatively inexpensive but it got good reviews and it's been a work horse for me. No complaints, great for the hobbyist metal worker .... Here's a link. amzn.to/2MknAaA Thanks for watching

@davehubbard109 4 жыл бұрын

Why are you using white pipe and painted it black instead of tissues in the black pipe what am I missing

@TheMuzShop 4 жыл бұрын

Good point .... I'm not sure.

@humphreyhe3611 5 жыл бұрын

Where did you buy that straps?

@TheMuzShop 5 жыл бұрын

@jgilbertg5719 Жыл бұрын

Can you add a PSI gauge to this?

@TheMuzShop Жыл бұрын

I done see why not as long as it’s airtight. Thanks for watching 👍👍

@youshouldseethis.6678 5 жыл бұрын

Fancy

@TheMuzShop 5 жыл бұрын

Cheap Charley thank you it works pretty good!!

@timquinlan2043 2 жыл бұрын

What schedule PVC did you use?

@TheMuzShop 2 жыл бұрын

Schedule 40. Thanks for watching 👍🏻👍🏻👍🏻

@MrYoungNbrown 6 жыл бұрын

Can you post a list of what you used?

@TheMuzShop 6 жыл бұрын

Here is a list of what we used but you change things up to fit your needs .... Thanks for watching and I hope this helps 1- 6” schedule 35 pvc pipe about 5’ long 2- 6” end caps 1- valve stem 1- ¾ “ water spikette 1-¾ “ threaded fitting for the spikette 1- 1 ¼ “ water shut off valve 1- 1 ¼ 90 degree PVC primer and cement Metal brackets and rubber straps

@MrYoungNbrown 6 жыл бұрын

The Muz Shop thanks, I will be trying out this diy for my off roading adventures. Really neat

@hermiesmit1 4 жыл бұрын

@@TheMuzShop Thank you very much and I will build this today!

@TheMuzShop 4 жыл бұрын

Hermanus Smit Cool. Email me some pic when you’re finished. 👍👍

@marksatterfield 4 жыл бұрын

How do you keep it pressurised ?

@TheMuzShop 4 жыл бұрын

try is a little electric air pump as shown in the video. When the pressure runs low just put more air in it....

@marksatterfield 4 жыл бұрын

Ahh yes. I was thinking it would be great to automatically pressurize it.

@Casmige 3 жыл бұрын

The fatal flaw in your design is the Use of epoxy. In a water environment it is not going to hold up to vibration, swelling & contraction (barometric pressure) & will eventually crack & fail. You should’ve used some type of threaded O-ring pinch seal arrangement. As an engineer, you need to think long term...

@calebbaer3688 5 жыл бұрын

what air compressor did you use

@TheMuzShop 5 жыл бұрын

Caleb Baer thanks for watching. We used Goodyear i8000 120-Volt Direct Drive Tire Inflator www.amazon.com/dp/B003XGYDE2/ref=cm_sw_r_cp_api_H.VZBbJZF4JW0 and we are happy with it...

@calebbaer3688 5 жыл бұрын

how much did you pay for the 6 in pvc pipe? finding alot of different pricings but the lower ones dont seem to be in stock around me.@@TheMuzShop

@TheMuzShop 5 жыл бұрын

Caleb Baer sorry I really don’t remember...got it a Home depot.

@christophervallas8547 5 жыл бұрын

Can I use a bicycle air pump?

@hamaljay 3 ай бұрын

Do you get paid by how much you blue the work?

@TheMuzShop 3 ай бұрын

Too much?😂😂

@bradrussell1821 Ай бұрын

What psi did you use?

@TheMuzShop Ай бұрын

About 35 psi. Thanks for watching 👍👍👍

@jancarlos572 2 жыл бұрын

How long is it?

@TheMuzShop 2 жыл бұрын

It was about 5’ 6”. But make it the length that fits where you will be mounting it. Thanks for watching 👍🏻👍🏻

@boomerville Жыл бұрын

Why not use the water pressure in the hose to charge the system? That way you don't have to use an air compressor.

@felixlopes5870 3 жыл бұрын

hi Muz

@felixlopes5870 3 жыл бұрын

what is the size drill bits used? why you make the curve to the water intake?

@TheMuzShop 3 жыл бұрын

We actually ended up replacing that 90 with a straight one .....Use a drill bit as close to the size you need for a tight fit...

@ronnierockstaroutdoors1246 4 жыл бұрын

Where did you find that valve stem

@TheMuzShop 4 жыл бұрын

in the description below there is a part list and links.....Thanks for watching

@Tostito12345 3 жыл бұрын

I buy mine at the auto store