DIY: Stair Wall Lighting From Oak And LED Strips

Рет қаралды 414,935

7 жыл бұрын

In this video I made a stair wall lighting from oak board and LED strips.
Links to online shop for product equivalents what I used in my build:
LED Strip 12V 18W, 1 meter, water proof, cool white: goo.gl/KDWXEs
LED Driver for 1 meter of 18W LED strip: goo.gl/Y40wYY
LED Driver for 1 meter of 18W LED strip (thin): goo.gl/wwya1B
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Пікірлер: 92

@fynbo1007 7 жыл бұрын

Very cool, they look very beautiful. Thank you for sharing your amazing video

@Freddylikefood 6 жыл бұрын

I didn't see the connection to the outlet. A misleading video.

@AleksKo89 7 жыл бұрын

beautifully turned

@edmartian 8 ай бұрын

Nice results. Please learn more about being safe with a table saw. ❤

@FlyingShotsman 7 жыл бұрын

I'm building a house now and will definitely be doing this. Great idea! I think I'll use bamboo...

@carenburmeister5741 6 жыл бұрын

They're beautiful and you're a master at these projects!

@nathanielcullen1472 2 жыл бұрын

i realize it's quite randomly asking but do anybody know of a good place to watch new series online ?

@guillermobrett722 2 жыл бұрын

@Nathaniel Cullen I watch on FlixZone. Just search on google for it =)

@celmonico 6 жыл бұрын

Nice job ! Thanks for sharing !

@caferkalamar5370 7 жыл бұрын

u r very crazy boy... design is very very nice... wooden and led strip is very good combination thx dude... following u

@iamthepolice 6 жыл бұрын

This is effing fantastic!!!! Need more videos please. Subbed yoo

@mccc4559 6 жыл бұрын

YOU ARE THE BEST - THANK YOU - BEST WISHES!!!

@antoniomessias2293 6 жыл бұрын

Show de bola vou tentar fazer uma aqui em casa.. Obrigado valeu...

@sumitandy 6 жыл бұрын

great work

@alexanderpasnl 7 жыл бұрын

I really like this and beautiful wood used, but with a few minor adjustments the light could also have spread freely underneath and on top of the wood to create an even more floating feeling. Will keep this in mind though. Thanks.

@maxnook8633 6 жыл бұрын

Very nice. I would have made them a tad bigger though because they kinda look lost on these huge walls. But they are a beautiful accent to your staircase.

@Dane289 7 жыл бұрын

Looks really good! Like

@LeeHarries 6 жыл бұрын

Really nice project, thanks for sharing it. Have you considered RGB LEDs with WiFi colour control?

@moddok 6 жыл бұрын

wow, awesome!

@fakeapplestore4710 6 жыл бұрын

lovely

@salvatorelimpido911 6 жыл бұрын

Very Nice 👍

@darkgift3127 7 жыл бұрын

eline sağlık güzel olmus usta

@Andili76 6 жыл бұрын

Love it.

@StephenNu9 6 жыл бұрын

The lights are beautiful, but I'm not sure what you did with the blue and brown wire by connecting them to the block? Are they alternative power connections that you simply dead-ended in the block?

@privatename2648 6 жыл бұрын

100 jerks giving a thumbs down--he couldn't have been more helpful or clear, why any thumbs down? Thanks for the vid!

@prathamlikhmania78 6 жыл бұрын

how its on..... had u use a battery or someting els

@starpage3860 5 жыл бұрын

What is the best brand of wood glue? Thanks in advance

@dlaronsworld1812 4 жыл бұрын

Looks cool but what is your power source? 🤷🏾‍♂️

@Fabrizio_Marengo_Fai_da_Te_DIY 6 жыл бұрын

well done

@albertlwj 5 жыл бұрын

veryy nice

@muhammedfarshad1201 6 жыл бұрын

super

@rortiz77 7 жыл бұрын

Looks beautiful. How do you turn lights on/off?

@jeffharmed1616 7 жыл бұрын

Thanks for sharing. Yes, where did the AC come from?

@VasilisKarastergios 7 жыл бұрын

Behind the led lights is the AC line, all stairs are designed to have lights!

@harjs9000 6 жыл бұрын

rortiz77 thats what I am trying figure out , how do these lights get power?

@sidahmedakcentSidahmedLm 6 жыл бұрын

with one switch connected to previous lights that were installed., he deleted them and added AC/DC inverter 220v to 12v DC.

@ramandeepsingh5497 4 жыл бұрын

@@harjs9000 sahi aaa bahut damag aaa tera light kithu deni 😄😁😁😁😁😇🙈

@hawyercruz3618 7 жыл бұрын

Cool

@ledmk2 6 жыл бұрын

Nice made, but i need wire for the voltage. I not have wires out of the wall.

@sunilseth3114 5 жыл бұрын

Genius ☺But i dont have the Tools.... To make it myself

@cherie_bunny3745 5 жыл бұрын

how do you switch them on and off?

@brandookie79 3 жыл бұрын

How are they powered?

@AzTK96 5 жыл бұрын

Love it, you should patent that.

@1982MCI 5 жыл бұрын

That's funny!

@HyperShadeTutorials 6 жыл бұрын

Where is the power coming from? Does it come from the final peace which was the block. Which then sends currents? If someone could explain this i would be greatful planning to make some for my house but need to know you dont need a external power supply right

@LyenFish 2 жыл бұрын

I'm three years late but you do need 110-220v power supply from the wall going into the the white block, most likely the installation was already done in his house and hooked up to the stairs switch.

@craigerjacks2582 4 жыл бұрын

What kind of wood did you use?

@Thelegend-gt5lb 3 жыл бұрын

How do you chase the wires in the wall

@jaansanyadav8884 6 жыл бұрын

What about power connection

@ran114 6 жыл бұрын

Would love to take this concept into a self sustaining approach. Anyone have an ideas on how to do so? New to all this, and this would be the closest interpretation to the concept in mind.

@carriemoore751 6 жыл бұрын

Hmm going to do this with independent LED lights so there's no need to hook it up to an electric source 👍

@kidmx 6 жыл бұрын

use 120V led Strip, no need of drver and totally compatible with dimmers

@craigerjacks2582 4 жыл бұрын

What kind of wood is that?

@winterjoel 7 жыл бұрын

Curious--how are they powered, and turned on/off?

@danielnorwood6233 6 жыл бұрын

@isasukarni 6 жыл бұрын

So he had to drill into the walls and connect it to a light switch?

@howimade3309 7 жыл бұрын

ty! subd

@jnn4853 7 жыл бұрын

how do you turn them on and off? with a remote? that part seems so complicated to me

@ericglidden5207 6 жыл бұрын

JNN they're wired to a light switch

@1982MCI 5 жыл бұрын

@ndcl10 7 жыл бұрын

Just wanna ask how did you install it and how do you power it up?

@nevrbdwnruby7484 7 жыл бұрын

Due to the metal string he installed on the back I assume he hammered a nail maybe 1/4 inch head stick out... then A/C power, this maybe a new construction or previous lights that was installed... It must b/c that white block is an AC/DC inverter..

@AprendizAdulto 6 жыл бұрын

so basically, it's hardwired

@MintStiles 6 жыл бұрын

Dont force your pieces together like that. The convergence of the pieces can bind on the carbide teeth and cause a kickback. Without a proper push-stick it will also suck your hand in a bit. Safety first friend.

@user-lh4gd8fl8h 7 жыл бұрын

cooooooooooooooooooooool

@powerofone1645 5 жыл бұрын

They look great but I can't wire to mains.... If these were only self battery powered and motion detected on off operation then I would be interested.

@edmartian 8 ай бұрын

So use a battery capable controller, add a motion sensor and get to work. 😂

@GTGallop 7 жыл бұрын

How did you get power to the fixtures? Is there a junction box behind them?

@technotrolla1254 4 жыл бұрын

Why? why didn't you make straight cuts?

@BrunoBostick 7 жыл бұрын

À velocidade do serrote sem compensa comprar rebarbadora

@Wood_and_metall. 6 жыл бұрын

👍👍👌👌

@blimyed 7 жыл бұрын

goooooooooooooooooooooooooooooooooooooooood

@SHMV248 5 жыл бұрын

Это хорошо под скрытую проводку ... и только ...

@manarelhoshi5595 7 жыл бұрын

the first like and comment

@nico8273 7 жыл бұрын

I really dont think that you should get a bigger power supply for the leds, I think its better to give some kind of limit to it, because with time, leds will eventually heat, and while they're heating they're taking more and more current, wich will reduce its useful life overall

@fakeapplestore4710 6 жыл бұрын

Nicolás That's why he used an LED driver

@schawriya1603 6 жыл бұрын

were is switch on off button

@sidahmedakcentSidahmedLm 6 жыл бұрын

with one switch connected to previous lights that were installed., he deleted them and added AC/DC inverter 220v to 12v DC.

@Cristoreydereyes100 5 жыл бұрын

name wood please

@1982MCI 5 жыл бұрын

Oak

@valeriy_aleksandrovich 7 жыл бұрын

Ну у тебя и акцент..

@7deser 5 жыл бұрын

слишком просто выглядит. покрывать дерево можно было и до монтажа, блок питания зверский для этих двух кусочков, не рационально... надо бы состарить дерево и покрыть более темным. и лучше бы рубить полосы вдоль рисунка дерева, а то видно что из кусков нарубили кустарно.