DIY Vacuum Former

Рет қаралды 60,038

7 жыл бұрын

Plastic from McMaster-Carr - www.mcmaster.com/#catalog/122...
Also, check out the “Puppet Tears Podcast”
In the podcast, we talk to assorts of puppeteers and puppet builders from the industry. We talk about on puppetry from tips on building puppets to the business side.
• Puppet Tears: Puppetry...
My supply list is here!
www.adamkreutinger.com/suppli...
LET'S CONNECT!
-- / kreutingerpuppets
-- / adamkreutinger
-- / adamkreutinger
Foam:
www.foamonline.com
Cube & Rectangular
Foam Type: Dry Fast (2.15 lb)
Firmness: Medium
Length: 24 inches
Width: 48 inches
Height: 1 inch
About the channel~
I am a maker/performer. I primarily work on projects using puppetry but I also do projects that are fashion design, cosplay, costuming, set building, and much more. On this channel, I have building videos, Shop Tips, time-lapse build etc.
SUBSCRIBE!
kzfaq.info...
If you're a maker or puppeteer yourself and you have ideas of what you would like to see on this channel please comment below. I'd love to have you subscribe and join us!
FREE PATTERNS: "Puppet Building" www.adamkreutinger.com/
MY CAMERA GEAR!
Vlog Camera- Canon 80D:
amzn.to/2rXB8wk
On the Road Vlog Camera- G7 X Mark II
amzn.to/2zftOPC
Camera for Film Work- Canon 5D Mark III
amzn.to/2seOWWi
Wide angle lens- Canon EF-S 10-22mm:
amzn.to/2rMDY8U
Favorite lens: Canon 50mm 1.2:
amzn.to/2rhodn6
Mid Range Lens- Canon 24-70 2.8:
amzn.to/2rhvTpl
Main Mic- Rode VideoMicPro:
amzn.to/2rXEHCJ
Backup Mic:
amzn.to/2s8XTzR
The BEST Tripod:
amzn.to/2rhkTsd
Time-lapse and POV Camera- GOPRO Hero5 Black:
amzn.to/2spjogb
Recommended Camera starter kit:
amzn.to/2r5E6O9
Music by Kevin MacLeod

Пікірлер: 38

@kevinmarinelli6516 3 жыл бұрын

I look forward to trying this project some time! You always have the best videos! Puppeteers rule!

@joseluisruiz3789 3 жыл бұрын

Great video and yes I found someone who made their own vacuum forming block/Frame thing. I will be making one soon as this would be great for some of my DIY Car Audio Projects.

@josieray5362 7 жыл бұрын

Superb job!

@Jaze2022 3 жыл бұрын

Thank you for making this video. I invented a baby potty seat and tried to get a shop to make it. I already self made a fiberglass mold and made a few epoxy prototypes. Long story short, i got screwed over by the thermoforming shops. I think the only way to make it economically in the near term is to rig up a similar contraption like yours. Thank you again sir

@holymonkey7722 7 жыл бұрын

That is pretty amazing and very informative! Always love seeing your work. Off subject but in agreement with the previous posts, hook us up with the puppet body video please. I've been using your technique for the head but the bodies never come out quite right. Thanks again for sharing what you do!

@Northentier 4 жыл бұрын

I think you can dissolve the polystyrene scraps in acetone, stir occasionally, it forms a thick syrup that can be used as glue, store is a jar with tight lid.

@PuppetNerd 4 жыл бұрын

Cool!

@mexluis57 7 жыл бұрын

thank for the video man. hey can you make the puppet body video please?

@danielyork5929 7 жыл бұрын

I've seriously been waiting a long time for the puppet body making vid so can you please do that

@Dionatronics 6 жыл бұрын

What heat setting did you use? I believe these heaters have a I,II, and III heat setting. Thanks for the great video!

@aplusdesigners 7 жыл бұрын

Maybe you should consider getting a used oven from somewhere and use that to soften your plastic. Other than that, its a great video for a DIY guy such as myself.

@gildardo 6 жыл бұрын

What heaters are those? I'm looking at used heaters and I need to know the BTUs.

@michaelraney1676 6 жыл бұрын

Where do you get your plastic from? Im looking for something like thermofoil to recover kitchen cabinets. Where can i find sheets at lest 4x8's.

@PuppetNerd 6 жыл бұрын

Links are in the description.

@jessecarr2726 6 жыл бұрын

I have a question about doing this. I have a mold that is 9.25 inches square and 5 inches high. The center is open. My platform on the vacuum box is 10 inches. My sheet is .06 inch thick and 12x12. Think it will work?

@PuppetNerd 6 жыл бұрын

+Jesse Carr: There’s one way to know for sure! Try it! Sounds like it will work as long as it’s heated enough evenly.

@masyantototok7199 6 жыл бұрын

material used from what?

@cgimasters3422 7 жыл бұрын

what's the thickness of the plastic sheet you used??? you said three thirty-seconds thick but what do you mean by that??

@PuppetNerd 7 жыл бұрын

+CGI masters: Hey! Links are in the description.

@adamcopple7131 6 жыл бұрын

CGI masters 1 inch divided into 32nds thus the thickness is 3 x 32nds

@rossmansell5877 6 жыл бұрын

Education is a great thing eh?

@tedpeek76 6 жыл бұрын

I can't comprehend why you couldn't comprehend that description.

@Tocsin-Bang 6 жыл бұрын

Maybe because in most of the rest of the world we use the metric system!

@costume35 5 жыл бұрын

hello adam what is the name of your patio heater can u please send me a link please

@cartmanrlsusall 7 жыл бұрын

this is better than fiberglass,gotta look up costs

@twisted_seraph 6 жыл бұрын

Can you use coated 3D prints for your buck?

@babujonnwesley2356 2 жыл бұрын

Sir, May you tell me the thickness of sheet....? Please

@stephencraig8578 6 жыл бұрын

How do you hold the plastic in the frame?

@PuppetNerd 6 жыл бұрын

+Stephen Craig: I used a staple gun.

@stephencraig8578 6 жыл бұрын

staples, thank you

@tedpeek76 6 жыл бұрын

Cut the heighth down on your heating box and line it with sheet metal

@PuppetNerd 6 жыл бұрын

Why?

@tedpeek76 6 жыл бұрын

Instead of rebuilding the box. Just line it. And cutting the heighth down a cpl inches should speed up your warming time. Just my 2c

@harmonicposting 4 жыл бұрын

@@tedpeek76 Sorry about being 2 years late, but anyway I'm about to build something like this myself. In particular I'm worried about the heating box. Will lining the inside of the box with sheet metal actually be effective in both protecting the wood and heating the plastic faster?