DIY | Wheel Spacer Install and Torquing
Рет қаралды 112,256
4 жыл бұрынWheel Spacer Link: bit.ly/3dWmY6x
Derek shows us the different types of wheel spacers and shows us how to properly install them without any wobble!
Check out our other DIY Videos:
bit.ly/3e2yJZ3
Wheel spacers increase wheel offset to improve vehicle appearance and handling. These discs, with hub and wheel bolt holes, fit between the wheel and hub to push the wheels outward. This pair of 20mm spacers was manufactured from lightweight aluminum, allowing you to achieve the look you want with quality parts.
Wheel spacers from ECS Tuning are available in thicknesses from 3-20mm, to widen track, improve cornering, and provide extra room for altered suspension and brake components.
@mattman8136 4 жыл бұрын
that stache lookin' fresh
@ecstuning 4 жыл бұрын
Oh yea!
@izak4711 2 ай бұрын
Do you still agree three years later mister? :)
@ChoPi-Eww 2 жыл бұрын
Great details, very thorough!
@Bytrl 3 жыл бұрын
I'm loving that blue
@Albee166 4 жыл бұрын
Derek wit dem straight Barz at the end!!! 4:45
@davideaton1192 4 ай бұрын
Great video. I'm leaning towards putting spacers on my 2014 Audi S5. You're stock Audi wheel in the video is exactly like mine.
@bryangonzalvo 3 жыл бұрын
I ordered 12.5mm for the fronts and 10mm for rears for my e39 530i. I had not seen this video. My 12.5mm fit like a glove but the 10mm had the exact rocking motion shown here; the wheel would not sit flush against the spacer. Ordered another set of 12.5mm for the rear. Wish i had seen this video before. Or I wish they would have included a link to this video on the 10mm and 12.5mm product descriptions on the site. I still would not have know which would fit but i would have done a better job of test fitting before installing.
@_Thale_ 4 жыл бұрын
Cool stache by the way!
@alfonsobecerril6131 3 жыл бұрын
Hola para una suv BMW X1 F48 2107 unos spacers es recomendable y no perjudica la suspensión y las ruedas
@jasmine8384 3 жыл бұрын
Do I need to increase the wheel torque after the spacer install or same as before?
@voongnz 3 жыл бұрын
Thx
@exthvn 3 жыл бұрын
I realize after watching the video that I put a lot of anti seize than he did. Will there be any issues with that?
@AndreiCristt 5 ай бұрын
Hub centric rings are needed only for the aftermarket wheels or even for the OEM wheels ? Thank you in advance
@115zombiees 2 жыл бұрын
So I got the 10mm and my wheels sit at a slant and wobble when I drive, should I go with 12mm? Or go humblest spacer, plz help 🙏
@TRHardware 11 ай бұрын
Is it not needed to actually lock the spacer itself with log nuts before just running through the rim bolts?
@ads7686 3 жыл бұрын
How can i find out if my aftermarket wheels will have chamfer with the 10mm space
@vk45dett 2 жыл бұрын
Can u use 45mm bolts for 10mm spacers ? Bmw m4
@dennisflores6344 3 жыл бұрын
I need wheel spacers for a cadillac 2013 srx 6x120 do u guy have those or make them
@Gabgzz11 10 ай бұрын
So will the 12mm or 15mm spacers fit my Audi A4 b9 2018? Since the 10mm won't? The website says it does not fit my car?
@jasondonaldson2150 3 ай бұрын
I ordered spacers for my 2024 Nissan Altima SR. I ran into that situation you talked about with the chamfer on my OEM wheels. The center part of the spacer doesn’t seat all the way into the original rim. The rim rocks in all directions on the spacer. The specs for my car suggest that is has a 66.1mm bore, which is what I ordered but they still don’t seem to fit. Is there a way around this?
@Guilhermepalmeida 3 жыл бұрын
Didn't get one thing clear. So you've talked about the hubless spacers but did not cover how to proper install it....Is it safe to use one of these?
@Zaudi_Jonas 3 жыл бұрын
How long is that Wheel Hanger?
@pedrocols 2 ай бұрын
Which spacers fit the Alzor 628 wheels?
@MarekGrubala 4 ай бұрын
Is there any sense to add spacers to MiniVan (chrylser pacifica 2300kg)?
@rogerklotz7471 4 жыл бұрын
So basically I need to a run 12mm spacer on my aftermarket wheels (rotiform blq) so it doesn't rock back n forth like how the 10mm spacer does?
@ecstuning 4 жыл бұрын
Yes, give a larger spacer a try.
@rogerklotz7471 4 жыл бұрын
Okay thank you for the response!
@AxelDigital 4 жыл бұрын
the stache
@franciscomedina5332 4 жыл бұрын
Hi, just what I'm looking for for the back of my vw Sharan 7m 05 truck, I have oem 17 "wheels and I would like to fit this 30mm spacer if it fits?
@ecstuning 4 жыл бұрын
You can try it and return it if it doesn't fit.
@DutchDukeMan 7 ай бұрын
i personally put the spacer on the wheel first and then install the wheel like normal with the spacer on it.
@86Junaid. 3 жыл бұрын
What is the torque spec? Just received mine and have a slight vibration on 160km/h+ Might just rebalance my wheels at the same time.
@86Junaid. 3 жыл бұрын
Mk7 gti - flush kit
@startingtech3900 3 жыл бұрын
Hey guys I ordered the h and r spacers. But need to cancel my order and buy yo black 20mm in house brand. I emailed sales. Hope you guys get back to me I will try tomorrow it’s sat night rn
@samgab 2 жыл бұрын
Thanks for the informative video. I have a 2017 Audi S3 8V Sporthatch, with factory 19" wheels. I am looking to get wheel spacers all around. Can you please recommend a thickness that will ensure I don't have to make any modification to the wheel arches etc, and won't get any rubbing or tire contact issues, including on the front from lock to lock, and even on full suspension compression? Cheers!
@_NB233 Жыл бұрын
Did you ever figure this out
@samgab Жыл бұрын
@@_NB233 No... still on factory rims. I think 40 offset will work, but I'd prefer to check they don't rub first.
@samgab Жыл бұрын
Sorry, I mean 40 offset in new rims. Wheel Spacers are completely illegal in my country, believe it or not...
@Ali-Muscle 4 жыл бұрын
So that’s why my vibration is amplified since I’ve put on the spacers
@OCANALDOMARKITO Жыл бұрын
When i took out My 10 mm spacers they were broken
@knoleng8590 2 жыл бұрын
I'm using 25mm
@tahirotahir 2 жыл бұрын
After adding 20mm spacer, do I have to put new extended wheel lug bolts?
@zarifhossain8817 2 жыл бұрын
yes
@maks_sp33d96 2 жыл бұрын
Yes, they should come with the spacers tho
@isiahemerson980 3 жыл бұрын
I put 04 golf wheels on my 96 Camry and it’s rubbing on the back struts which is causing a wobble with 16x7, 5x112… what should I do.
@dumbeezy5480 3 жыл бұрын
Different hub bore size maybe? 04 golf wheels are 5x100. Idk what lug bolt pattern the 96 camry is
@zrlfoo 4 жыл бұрын
I had the same issue with ecs 10mm spacer on my OZ wheels. You talked about the issue so what’s the fix? Or how to find the right spacer spec?
@ecstuning 4 жыл бұрын
Best bet is to try it on your wheel without mounting. If you have issues you can return them as long as you don't install it onto your car.
@cobaltpica 3 жыл бұрын
i’m on OZ Racing Leggera HLTs on my 2018 A4 B9. The OZ wheels have a centre bore of 75mm and the 10mm ECS tuning spacers have a “hump” of 70.5mm on the back of the hub centric lip. To solve the fitment issue, i ordered a set of OD 75mm x ID 70.5mm x Width 8mm hub rings. My OZs now sits flush with my fenders with the spacers installed. No vibrations whatsoever. 😺👍🏼 www.amazon.com/NB-AERO-Aluminum-Centric-Hubcentric-Centerbore/dp/B07GD2GM3X
@Otjmore 3 жыл бұрын
Stache game strong
@_Thale_ 4 жыл бұрын
Is it safe to drive at high speeds with wheel spacers on
@ecstuning 4 жыл бұрын
Yes.
@jabinwang4311 4 жыл бұрын
nice video, I also have make some video about installing wheel spacers, welcome you to give me some advices.
@mehaboobkhan1669 3 жыл бұрын
Vw
@TheNanofiber 4 ай бұрын
Do you need a wheel alignment after install? Thx
@NhatNguyen-xs7kl 2 ай бұрын
I don’t think so, since you aren’t messing with suspension parts
@sheepmanproductions 4 жыл бұрын
I've done the install as recommended on my GLI with 12.5mm up front and 15mm in the rear, but I still encounter a vibration felt in the steering wheel and seats around 75-85 mph. When the spacers are off there is no vibration. Do you have any suggestions as to how I can eliminate the vibration?
@ecstuning 4 жыл бұрын
First, check the balance of the wheels. Vibrations will be amplified with spacers. Second, make sure there is no chamfer interference between the spacer and the bore on your wheels. Lastly, ensure they are torqued properly. In odd situation, you may have a defective product, and we can measure your spacers if you still have issues. Please check over the first three tips.
@omergilert7355 3 жыл бұрын
I also buy this ecs spacers for my a3 8p and i also get the vibrations you say. I think its not center properly and this spacers are garbage
@jboesz6569 3 жыл бұрын
@@omergilert7355 I bought ECS 8mm spacers. I hate to say it but I agree. I should’ve just bought 42 Draft Designs spacers. They never did me wrong.
@shibidi 2 жыл бұрын
@@jboesz6569 I have the 8mm spacers too and they vibrate like crazy at 55mph. Did you get this fix this issue?
@jboesz6569 2 жыл бұрын
@@shibidi I apologize for the late response. I took them off. The wheel fitment look fine without them.
@f1f278 2 жыл бұрын
On his way to becoming Mr Potatohead... great video
@christiancastro8635 2 жыл бұрын
What rims are those ? The wheel he grabbed first?
@anthonynicolazzo7579 Жыл бұрын
I believe alzor replica rims or just actual audi S4 rims
@DFN21_ 4 жыл бұрын
Ooh what are those rims? The aftermarket ones lol
@matias7497 3 жыл бұрын
i wanna know too looool
@sebizeries5120 4 жыл бұрын
Do you need new, longer lug bolts when using 15mm spacers or will the oem ones still work?
@ecstuning 4 жыл бұрын
Yes, longer ones are needed and included in all of our spacer kits. We did the measuring for you!
@Sinister6_cuv Жыл бұрын
Do you guys sell lock nuts for the correct size spacers?
@johnviera3884 2 жыл бұрын
I’ve never seen a brake rotor with no lug nuts and holes for bolts.
@danrook5757 2 жыл бұрын
Welcome to German car ownership
@fredgasburger5969 4 жыл бұрын
What’s the point of a wheel spacer?
@ecstuning 4 жыл бұрын
To clear suspension components or to make the wheel flush with the fender.
@JuanManShow 4 жыл бұрын
So it's looks better, some car wheels a way too inside and would look subjectively better if the wheel was a bit more out and flush with the body
@cyclistman6358 3 жыл бұрын
IMO using spacers is a bad idea for several reasons. But if you need that look then it's your choice. Peace.
@dumbeezy5480 3 жыл бұрын
explain
@EvolutionSev 2 жыл бұрын
@@dumbeezy5480 he’s spewing shit, it’s completely safe when installed correctly.
@pochopov 2 жыл бұрын
who's gonna be torquing when doing a simple tire change on the side of the road? asking for a friend
@GenerationNoise 3 жыл бұрын
who the heck torques lug nuts lmao
@ecstuning 3 жыл бұрын
Errrm.....
@GenerationNoise 3 жыл бұрын
@@ecstuning is that a grease monkey thing ...inside joke?...errrm....serious though just over torque the nuts .It aint gooon hurt a ting
@dumbeezy5480 3 жыл бұрын
@@GenerationNoise Errmm
@Gabriel-km2xi Жыл бұрын
@@GenerationNoise Errrm...
@morganfreeman5171 4 жыл бұрын
They are a fast and easy way to ruin the geometry of your car and can badly affect the handling.
@ecstuning 4 жыл бұрын
If installed properly, it won't effect handling. It will actually increase it.
@KasamS 4 жыл бұрын
@@ecstuning turning radius is increasing depending on the offset of the wheels, slightly more strain on the wheelbearings aswell
milanmastracci
Рет қаралды 489 М.
Sago_t4r
Рет қаралды 77 М.
Ravshan_texnoshorts
Рет қаралды 3,9 МЛН