DIY how to change NGK spark plugs and intake filter on 2015-2023 Yamaha R1. WELL WORTH the effort! 👌👌👌 it’s amazing how restrictive the stock intake was. Very cheap bang for the buck mod. #yamahar1 #r1 #sparkplugs
Пікірлер: 23
@nickwarren58004 ай бұрын
Great video showing this job. I do want to point out that you keep referring to spark plug wires. Those are the coil packs. Also for the future. To clean that filter just use compressed air. You can clean with dawn dish soap, just be sure to completely dry out before installing.
@hernzo97986 ай бұрын
For anyone out there who wants to know, an xtra thin wall 14mm spark plug socket is needed to reach your spark plugs, ordinary sockets won’t cut it .
@moneyfornothing3264 Жыл бұрын
Awesome video my friend! I’m consider myself fairly mechanically inclined, however that was in depth, especially when you went back and pointed out just the hoses. Lol. Looking good buddy, glad it’s a recognizable improvement!
@badass1g Жыл бұрын
Good to see you brother thanks for the comment 🤘
@Sacto9112 ай бұрын
Service Manual recommends replacing the air filter every 24k miles
@TheKing-nu4fk3 ай бұрын
You are running the bike extremely lean on modded exhaust and intake. Do not do any of this without a tune or you WILL run your bike lean and cause damage. These bikes are all lean as it is from factory causing them to run a little on the hotter side stock.
@badass1g3 ай бұрын
Wrong. I live at 4200 ft elevation so it runs richer up this high. Also I have an ecu flash long time ago. As well as a wideband AFR guage to keep an eye on it all. Bike has been running strong for 4 years, lots of miles.
@adidanielhaq9964 ай бұрын
awesone video sir, may i knoe whats spark plug model that u used it?
@badass1g4 ай бұрын
It was the one that came stock
@mcdadephotography8 ай бұрын
What year model R1 do you ahve. Apparently my 2023 R1 ECU can t be sent off liek the previous versions did.
@badass1g8 ай бұрын
2020. Are you sure? Last I heard the 20-23 are easily flashable now. Call Moore mafia to be sure
@MaaarcusDarling7576 ай бұрын
I have a 23 also. I sent my ecu to Moore mafia. On their KZfaq channel they have step by step video to show how it’s done. The flash is phenomenal btw
@Tyler_R1S Жыл бұрын
What size Allen wrench did you use to take the velocity stacks off
@badass1g Жыл бұрын
I can’t recall I think it was 5 or 6 mm. Did I not say in the video? It has to be long and skinny.
@Tyler_R1S Жыл бұрын
@@badass1g lol i ended up buying a set
@DavidRamirez-jd4wx10 ай бұрын
Can I just loosen the side plastics and do it like that. Like an r6
@McKillop19933 ай бұрын
Ive just did this on my 2016, but now the dash fuel light is flashing and she wont start?
@badass1g3 ай бұрын
Prob forgot to plug something back in
@reno_r1_8 ай бұрын
Hello,Is it safe to remove the air filter restriction on a 2020 r1 without a tune??
@badass1g8 ай бұрын
I ran a full exhaust without a tune for over a year. That being said why not just send it to Moore mafia for a cheap flash and get all that extra power for a couple hundred bucks ?
@reno_r1_8 ай бұрын
@badass1g Thanks for the response. I already talk to Chris and plan to send it out after the holiday mail rush but my air filter arrives tomorrow and that's why I was wondering if it's safe to run it until then?
@TheKing-nu4fk3 ай бұрын
@@reno_r1_it is not safe to run any mods changing anything on intake or exhaust without a tune or you'll run the bike lean and they're already on the leaner side.